The subject of this public contract is the ongoing supply of wood pellets for the contracting authority Home of Social Services in Liblín.
Estimated value excluding VAT: 10 000 000,00 CZK.
Estimated value excluding VAT: 10 000 000,00 CZK.
Edged lumber:
- an edged board has a regular geometric shape, with a rectangular cross-section, and is completely cleaned (trimmed) on all sides;
- dimensions (length): 4000 mm.
- an edged board has a regular geometric shape, with a rectangular cross-section, and is completely cleaned (trimmed) on all sides;
- dimensions (length): 4000 mm.
Hello!
We would like to purchase the following:
- 10x10 lumber, 4 m long;
- 48 [mm] lumber, 4 m long;
- 24 [mm] lumber, 4 m long.
Have a great day!
We would like to purchase the following:
- 10x10 lumber, 4 m long;
- 48 [mm] lumber, 4 m long;
- 24 [mm] lumber, 4 m long.
Have a great day!
Procurement of hardwood firewood (beech, oak, hornbeam, etc.).
The firewood must meet the following specifications:
- hardwood species: beech, hornbeam, oak, etc.;
- must be dry;
- must have a length of 1 linear meter;
- must have a diameter/thickness between 15 cm and 40 cm;
- must be free of knots.
The firewood must meet the following specifications:
- hardwood species: beech, hornbeam, oak, etc.;
- must be dry;
- must have a length of 1 linear meter;
- must have a diameter/thickness between 15 cm and 40 cm;
- must be free of knots.
We are interested in buying debarked acacia poles 8/10 cm x 200 cm - 300 cm, 10/12 cm x 200 cm - 300 cm.
Acacia square stakes 3 cm x 3 cm x 150 cm - 170 cm.
Acacia square stakes 3 cm x 3 cm x 150 cm - 170 cm.
Supply of wood for boilers (wood chips and wood pellets).
We want to close a framework agreement for the supply of wood chips for the state hospital (AöR) is being put out to tender.
Estimated value excluding VAT: 606 430,00 EUR.
Estimated value excluding VAT: 606 430,00 EUR.
Hello, we need to buy wood chips. Estimated value excluding VAT: 270 000,00 EUR. Waiting for your offer. Thank you!
The estimated average annual requirement for wood pellets is as follows: quantity (340 tonnes) and volume (520 m³).
The wood pellets supplied by the contractor must meet the following specifications:
(i) DINplus, ENplus A1, or "NF Biocombustibles solides-granulés" (NF Solid Biofuels – Pellets) certification is highly recommended;
(ii) Class A1, in accordance with the EN ISO 17225-2 standard (2021 version), is mandatory.
Estimated value excluding VAT: 533 800,00 EUR.
The wood pellets supplied by the contractor must meet the following specifications:
(i) DINplus, ENplus A1, or "NF Biocombustibles solides-granulés" (NF Solid Biofuels – Pellets) certification is highly recommended;
(ii) Class A1, in accordance with the EN ISO 17225-2 standard (2021 version), is mandatory.
Estimated value excluding VAT: 533 800,00 EUR.
Supply of fuels, wood chips, wood pellets
We are purchasing firewood with the following specifications:
a) Wood category:
- Hardwood (beech, oak, hornbeam), with no admixture of softwoods or coniferous species.
b) Cutting dimensions:
- Length: 1 m, 50 cm, or 35 cm (± 5 cm), depending on the requirements of the receiving unit;
- Diameter: min. 5 cm – max. 30 cm (face width).
c) Processing/Preparation:
- The wood shall be sourced from trees felled at any time of the year; it may retain its bark or be partially or fully debarked, as resulting from logging operations;
- For wood prepared and measured in steres (stacked cubic meters), knots must be trimmed flush with the surface of the wood. The ends of the firewood pieces must be saw-cut, with the exception of natural breakages or the end originally attached to the stump;
- Firewood pieces with a thickness of 16 to 30 cm must be split into four.
d) Moisture content:
- To meet this requirement, the firewood subject to these specifications must be well-seasoned (trees must be felled at least one year prior to the delivery date).
- The maximum permitted moisture content is 25%.
e) Defects:
- Firewood of any category shall not exhibit the following defects: cubical rot or fibrous rot, in accordance with the conditions stipulated in Art. 2.3 of the STAS 2340/1980 standard. - wood that is scorched or over-matured—a condition resulting from it having been left on the ground for an extended period after felling, exposed to moisture and heat—is not accepted.
a) Wood category:
- Hardwood (beech, oak, hornbeam), with no admixture of softwoods or coniferous species.
b) Cutting dimensions:
- Length: 1 m, 50 cm, or 35 cm (± 5 cm), depending on the requirements of the receiving unit;
- Diameter: min. 5 cm – max. 30 cm (face width).
c) Processing/Preparation:
- The wood shall be sourced from trees felled at any time of the year; it may retain its bark or be partially or fully debarked, as resulting from logging operations;
- For wood prepared and measured in steres (stacked cubic meters), knots must be trimmed flush with the surface of the wood. The ends of the firewood pieces must be saw-cut, with the exception of natural breakages or the end originally attached to the stump;
- Firewood pieces with a thickness of 16 to 30 cm must be split into four.
d) Moisture content:
- To meet this requirement, the firewood subject to these specifications must be well-seasoned (trees must be felled at least one year prior to the delivery date).
- The maximum permitted moisture content is 25%.
e) Defects:
- Firewood of any category shall not exhibit the following defects: cubical rot or fibrous rot, in accordance with the conditions stipulated in Art. 2.3 of the STAS 2340/1980 standard. - wood that is scorched or over-matured—a condition resulting from it having been left on the ground for an extended period after felling, exposed to moisture and heat—is not accepted.