Beech and oak firewood

The firewood to be delivered shall comply with the provisions of STAS 2340/1980 (Category A: processed hardwood—beech, oak—stacked on pallets, in bags, or loose). Category A comprises processed hardwood (beech, oak) stacked in steres, excluding softwood or coniferous wood.

Specifications:

- the supplied firewood shall be transported and unloaded at each location; it shall be cut by the supplier to lengths between 25 and 30 cm and have diameters ranging from 0.16 m to 0.30 m;
- the firewood must be palletized (packaged) or loose, in accordance with applicable legislation;
- the firewood shall be split (into billets) with a maximum face width of 15 cm to allow insertion through the stove`s firebox door (255x275 mm).

The firewood must not exhibit the following defects:
- cuboidal rot;
- fibrous rot, subject to the conditions specified in Art. 2.3 of STAS 2340/1980 (Category A – processed hardwood stacked in steres on pallets). This standard applies to wood from various hardwood species—derived from forestry operations and the trimming of log overlengths—intended for use as solid fuel (firewood).

Category A comprises processed hardwood (beech, oak) stacked in steres, excluding softwood or coniferous wood.

Estimated value: 248,897 RON.