Hello!
We can offer charcoal briquettes.
We have just successfully fulfilled a 40-ton shipment to the US market. I am looking to open a direct-factory supply slot for a US-based trading partner at a disruptive price of 1,400/MT (FOB) for our Premium 2.0 White Ash specs.
By partnering directly with our factory in Wonogiri, we can optimize your margin significantly. Please reply to this email so I can send our technical catalog and arrange a master sample delivery to your office.
Best regards,
Galang Prasetyo
We can offer charcoal briquettes.
We have just successfully fulfilled a 40-ton shipment to the US market. I am looking to open a direct-factory supply slot for a US-based trading partner at a disruptive price of 1,400/MT (FOB) for our Premium 2.0 White Ash specs.
By partnering directly with our factory in Wonogiri, we can optimize your margin significantly. Please reply to this email so I can send our technical catalog and arrange a master sample delivery to your office.
Best regards,
Galang Prasetyo
Firewood delivery for the needs of the South Kurzeme municipality
Purchase of hardwood firewood.
Minimum quantity: 645 cubic meters.
Maximum quantity: 1000 cubic meters.
The firewood to be delivered will comply with the provisions of STAS 2340/1980 (category A - shaped hardwood hardwood, placed in stacks). This standard refers to wood of various hardwoods and softwoods, resulting from forestry operations and from cutting the excess lengths of logs, intended for fuel, called firewood. Category A includes shaped wood placed in stacks and double stacks - hardwood hardwoods, with a maximum of 10% softwood or softwoods.
Sterile shaped wood:
- length 1m+/-5cm
- thickness (with bark): round: 5...15 cm at the thin end; split (lobed): max. 30 cm width of the face.
Defects:
The firewood that is the subject of this specification cannot have the following defects:
- rot with cubic structure;
- fibrous rot, in compliance with the conditions specified in art.2.3 of STAS 2340/1980.
Shaping:
The trees are felled with a saw in forest exploitations and with an axe in groves, the wood remaining with bark, partially or completely peeled, as resulting from the exploitations.
The firewood shaped in steri must have the stumps cut down to the face of the wood. The ends of the firewood must be cut off with a saw, except for breaks and the end coming from the stump.
Firewood shaped into steri with a thickness of 16...25 cm must be split in two, that with a thickness of 26...40 cm must be split into four approximately equal pieces, and that with a thickness of 40 cm into so many pieces that the largest width of the split piece, measured at the thick end of the wood, does not exceed 30 cm.
The following conditions must also be observed: - the wood shaped into steri will be cut to 30 cm in length; - the diameter of the shaped wood will be between 5 and 25 cm, maximum 30 cm width of the face.
Humidity:
The humidity of the firewood covered by this specification is determined indirectly in relation to the weight of the ster, as shown below:
- the weight of the firewood at the time of delivery by the producer or distributor must not exceed, at a cubic factor of 0.62, the weight of 500 kg meter-ster of hard species without admixture of soft or resinous species.
In order to meet the above condition, the firewood covered by this specification must be very well dried (the trees must have been cut down at least one year before the date of delivery).
Minimum quantity: 645 cubic meters.
Maximum quantity: 1000 cubic meters.
The firewood to be delivered will comply with the provisions of STAS 2340/1980 (category A - shaped hardwood hardwood, placed in stacks). This standard refers to wood of various hardwoods and softwoods, resulting from forestry operations and from cutting the excess lengths of logs, intended for fuel, called firewood. Category A includes shaped wood placed in stacks and double stacks - hardwood hardwoods, with a maximum of 10% softwood or softwoods.
Sterile shaped wood:
- length 1m+/-5cm
- thickness (with bark): round: 5...15 cm at the thin end; split (lobed): max. 30 cm width of the face.
Defects:
The firewood that is the subject of this specification cannot have the following defects:
- rot with cubic structure;
- fibrous rot, in compliance with the conditions specified in art.2.3 of STAS 2340/1980.
Shaping:
The trees are felled with a saw in forest exploitations and with an axe in groves, the wood remaining with bark, partially or completely peeled, as resulting from the exploitations.
The firewood shaped in steri must have the stumps cut down to the face of the wood. The ends of the firewood must be cut off with a saw, except for breaks and the end coming from the stump.
Firewood shaped into steri with a thickness of 16...25 cm must be split in two, that with a thickness of 26...40 cm must be split into four approximately equal pieces, and that with a thickness of 40 cm into so many pieces that the largest width of the split piece, measured at the thick end of the wood, does not exceed 30 cm.
The following conditions must also be observed: - the wood shaped into steri will be cut to 30 cm in length; - the diameter of the shaped wood will be between 5 and 25 cm, maximum 30 cm width of the face.
Humidity:
The humidity of the firewood covered by this specification is determined indirectly in relation to the weight of the ster, as shown below:
- the weight of the firewood at the time of delivery by the producer or distributor must not exceed, at a cubic factor of 0.62, the weight of 500 kg meter-ster of hard species without admixture of soft or resinous species.
In order to meet the above condition, the firewood covered by this specification must be very well dried (the trees must have been cut down at least one year before the date of delivery).
We buy firewood chips for the needs of the Lejasciems boiler house.
Super quality hard essence firewood from Romania, for the cold season. We are a company with over 15 years experience and we sell the fire wood in the form of logs, logs or palletized firewood cut and prepared for immediate use. We offer delivery anywhere in Europe
Competitive prices: 119 euro/m³ transport.
For further information and orders, don’t hesitate to contact us
Competitive prices: 119 euro/m³ transport.
For further information and orders, don’t hesitate to contact us
We offer wood briquettes: RUF, Nestro, Pini Kay with delivery.
We offer wood briquettes RUF, Nestro, Pini Kay with delivery.
Firewood purchase with transportation, unloading and storage at the place of consumption included. Details upon request.
I am interested in buying and selling firewood. I am waiting for your price offer.
Hello!
I`m interested in split firewood. Can you give me the price per quintal, including shipping, for 20 units of beech wood? We sell wholesale if you give me a good price.
I was wondering if you also have pellets in the same quantity - 20 units. Also at a good price.
Thanks for everything. Good luck!
I`m interested in split firewood. Can you give me the price per quintal, including shipping, for 20 units of beech wood? We sell wholesale if you give me a good price.
I was wondering if you also have pellets in the same quantity - 20 units. Also at a good price.
Thanks for everything. Good luck!
Hello,
I hereby request your technical and financial offer for a biomass pellet and briquette production line, with a capacity of 300-400 kg.
Minimum technical characteristics and specific parameters:
1) auger with screening for transporting raw material to the dryer:
- auger motor -1.0 kW;
- sieve motor -0.65 kW.
2) auger for feeding the pellet press controlled by a frequency converter through which the raw material flow is regulated:
- motor 1.1 kW.
3) aerodynamic raw material dryer.
I hereby request your technical and financial offer for a biomass pellet and briquette production line, with a capacity of 300-400 kg.
Minimum technical characteristics and specific parameters:
1) auger with screening for transporting raw material to the dryer:
- auger motor -1.0 kW;
- sieve motor -0.65 kW.
2) auger for feeding the pellet press controlled by a frequency converter through which the raw material flow is regulated:
- motor 1.1 kW.
3) aerodynamic raw material dryer.