As Andrewpol wood company we mainly produce solid flooring (oak floorboard, oak parquet, ash parquet) as well as layered flooring. On top of our production we have added to the range of oak lamellas.
Lamella is defined as a few millimeters thick unfinished (wood layer) board, (not painted, not varnished, not oiled, with the possibility of two side or four side sanding) intended to be glued onto plywood with great accuracy in terms of dimensions, humidity and class selection. We produce lamellas in class I, II, III and REBUSTA (IV)
Our offer includes 3 mm to 7 mm thick lamellas in the following specification:
From about 3 mm 7 mm x 78 mm x (320-520) mm
From about 3 mm 7 mm x 100 mm x (520-1220) mm
From about 3 mm 7 mm x 110 mm x (530-2030 mm)
From about 3 mm 7 mm x 130 mm x (530-2630) mm
From about 3 mm 7 mm x 160 mm x (530-2630) mm
From about 3 mm 7 mm x 210, 230 mm x (530-2630) mm
If you do not find lamellas that meets your requirements for dimensions, class or final visual effect, please contact us and we can submit an offer according to your individual requirements !!!!
There is a possibility of production different size lamellas according to parameters selected by the customer.
Lamella is defined as a few millimeters thick unfinished (wood layer) board, (not painted, not varnished, not oiled, with the possibility of two side or four side sanding) intended to be glued onto plywood with great accuracy in terms of dimensions, humidity and class selection. We produce lamellas in class I, II, III and REBUSTA (IV)
Our offer includes 3 mm to 7 mm thick lamellas in the following specification:
From about 3 mm 7 mm x 78 mm x (320-520) mm
From about 3 mm 7 mm x 100 mm x (520-1220) mm
From about 3 mm 7 mm x 110 mm x (530-2030 mm)
From about 3 mm 7 mm x 130 mm x (530-2630) mm
From about 3 mm 7 mm x 160 mm x (530-2630) mm
From about 3 mm 7 mm x 210, 230 mm x (530-2630) mm
If you do not find lamellas that meets your requirements for dimensions, class or final visual effect, please contact us and we can submit an offer according to your individual requirements !!!!
There is a possibility of production different size lamellas according to parameters selected by the customer.
As Andrewpol wood company we mainly produce solid flooring (oak floorboard, oak parquet, ash parquet) as well as layered flooring. On top of our production we have added to the range of oak lamellas.
Lamella is defined as a few millimeters thick unfinished (wood layer) board, (not painted, not varnished, not oiled, with the possibility of two side or four side sanding) intended to be glued onto plywood with great accuracy in terms of dimensions, humidity and class selection. We produce lamellas in class I, II, III and REBUSTA (IV)
Our offer includes 3 mm to 7 mm thick lamellas in the following specification:
From about 3 mm 7 mm x 78 mm x (320-520) mm
From about 3 mm 7 mm x 100 mm x (520-1220) mm
From about 3 mm 7 mm x 110 mm x (530-2030 mm)
From about 3 mm 7 mm x 130 mm x (530-2630) mm
From about 3 mm 7 mm x 160 mm x (530-2630) mm
From about 3 mm 7 mm x 210, 230 mm x (530-2630) mm
If you do not find lamellas that meets your requirements for dimensions, class or final visual effect, please contact us and we can submit an offer according to your individual requirements !!!!
There is a possibility of production different size lamellas according to parameters selected by the customer.
Lamella is defined as a few millimeters thick unfinished (wood layer) board, (not painted, not varnished, not oiled, with the possibility of two side or four side sanding) intended to be glued onto plywood with great accuracy in terms of dimensions, humidity and class selection. We produce lamellas in class I, II, III and REBUSTA (IV)
Our offer includes 3 mm to 7 mm thick lamellas in the following specification:
From about 3 mm 7 mm x 78 mm x (320-520) mm
From about 3 mm 7 mm x 100 mm x (520-1220) mm
From about 3 mm 7 mm x 110 mm x (530-2030 mm)
From about 3 mm 7 mm x 130 mm x (530-2630) mm
From about 3 mm 7 mm x 160 mm x (530-2630) mm
From about 3 mm 7 mm x 210, 230 mm x (530-2630) mm
If you do not find lamellas that meets your requirements for dimensions, class or final visual effect, please contact us and we can submit an offer according to your individual requirements !!!!
There is a possibility of production different size lamellas according to parameters selected by the customer.
ANDREWPOL wood factory was established in 1989. We specialize in a professional production of all wooden floors, such as oak parquet, ash parquet, solid floorboards, layered boards, oiled floors, palace patterns, antiqued floors, stairs, finishing elements and lamella.
All our products can be purchased at three options of choice: for further sanding and finishing to your own preference, prepared for oiling or varnishing (product is beveled, sanded, antiqued etc.) or oiled and ready for assembling.
We hope that our many years of our experience in woodworking will meet your appreciation and will result in cooperation. We offer you the highest quality products and attractive prices in return.
To meet the expectations of our customers we decided to expand our product range by another product, which is layered parquet.Our layered flooring consists of two layers:
Top wear layer
Bottom layer made of birch waterproof plywood
Thanks to using of two layers of wood (different kinds) parquet is extremely durable, flexible and stable regarding the surrounding environment (high or low humidity).
The wear layer has got a thickness about 3 mm to 6 mm and is made of oak wood which is characterized by high durability and timeless look. To reduce the penetration of moisture from the substrate and to provide more stability to the parquet floor in the second layer we used waterproof birch plywood. For gluing these two layers, we use precisely cut material strictly according to technological standards, using the best adhesives available on the market.
Thanks to the use of two layers where the bottom part is cross-bounded, the durability of the layered floor increases. The parquet becomes more stable and better suited for rooms where the laying of a solid parquet floor has not brought a particular result, eg. in areas with high variability of humidity and temperature.
To high temperature, as in the case of a solid board, can cause drying and cracking of wood. High humidity will cause swelling of wood. It is believed that the optimum room temperature should be within the range of 19 22 degrees Celsius and humidity of 45 60%.
Floor made of layered wood can be classified as wood floor and can be finished the same way as solid wood floor, using either oil or varnish. On individual customers request, we offer the service of edges chamfering (two-sided or four-sided) and the service of antiquing.
In addition, you can order a parquet with expansion cuts on the bottom side of the layered board.
All our products can be purchased at three options of choice: for further sanding and finishing to your own preference, prepared for oiling or varnishing (product is beveled, sanded, antiqued etc.) or oiled and ready for assembling.
We hope that our many years of our experience in woodworking will meet your appreciation and will result in cooperation. We offer you the highest quality products and attractive prices in return.
To meet the expectations of our customers we decided to expand our product range by another product, which is layered parquet.Our layered flooring consists of two layers:
Top wear layer
Bottom layer made of birch waterproof plywood
Thanks to using of two layers of wood (different kinds) parquet is extremely durable, flexible and stable regarding the surrounding environment (high or low humidity).
The wear layer has got a thickness about 3 mm to 6 mm and is made of oak wood which is characterized by high durability and timeless look. To reduce the penetration of moisture from the substrate and to provide more stability to the parquet floor in the second layer we used waterproof birch plywood. For gluing these two layers, we use precisely cut material strictly according to technological standards, using the best adhesives available on the market.
Thanks to the use of two layers where the bottom part is cross-bounded, the durability of the layered floor increases. The parquet becomes more stable and better suited for rooms where the laying of a solid parquet floor has not brought a particular result, eg. in areas with high variability of humidity and temperature.
To high temperature, as in the case of a solid board, can cause drying and cracking of wood. High humidity will cause swelling of wood. It is believed that the optimum room temperature should be within the range of 19 22 degrees Celsius and humidity of 45 60%.
Floor made of layered wood can be classified as wood floor and can be finished the same way as solid wood floor, using either oil or varnish. On individual customers request, we offer the service of edges chamfering (two-sided or four-sided) and the service of antiquing.
In addition, you can order a parquet with expansion cuts on the bottom side of the layered board.
Wood ANDREWPOL Department was established in 1989. We specialize in a professional production of all wood flooring, such as hardwood, parquet flooring ash and the release of natural and modified. An important part of our production are also stairs and finishing elements.
Welcome to our website www.andrewpol.com.pl
We make the standard steps in Class I and Class II, stairs retro in Class I and II, box stairs, racks and carpet. We complete all of the wood railing and in connection with the metal. We have all the elements of the stairs and floor finishes.
An important part of the production are both stairs and laid directly onto concrete and self-supporting.
Stairs are glued from several balikw. The customer can specify their preferences and in accordance with the elements are selected in terms of coloring and grain of the wood chips. Stairs are sold complete with risers, or the same degree. Average width of the stairs is 30cm.
All products are made from a material seasoned and dried in special ovens for drying hardwood.
We hope that our many years of experience in woodworking meet your reputation and result in cooperation, in return, we offer you the highest quality merchandise and reasonable prices.
Welcome to our website www.andrewpol.com.pl
We make the standard steps in Class I and Class II, stairs retro in Class I and II, box stairs, racks and carpet. We complete all of the wood railing and in connection with the metal. We have all the elements of the stairs and floor finishes.
An important part of the production are both stairs and laid directly onto concrete and self-supporting.
Stairs are glued from several balikw. The customer can specify their preferences and in accordance with the elements are selected in terms of coloring and grain of the wood chips. Stairs are sold complete with risers, or the same degree. Average width of the stairs is 30cm.
All products are made from a material seasoned and dried in special ovens for drying hardwood.
We hope that our many years of experience in woodworking meet your reputation and result in cooperation, in return, we offer you the highest quality merchandise and reasonable prices.
Pine sawdust specifications vary but generally include moisture content between 8-12, a specific size range (e.g., 1-5mm), and a chemical composition of cellulose, hemicellulose, and lignin. The most critical specifications are particle size, moisture content, and wood type, all of which impact its suitability for specific applications like animal bedding, fuel, or composting.
Common Pine Sawdust Specifications
Wood Type: 100 Pine.
Particle Size: Variable, ranging from fine dust to larger shavings, but specific sizes such as 1-5mm are common for certain applications like flooring filler.
Moisture Content: Typically between 8 and 12, but can vary, influencing its density and absorbency.
Chemical Composition: Primarily cellulose (40-50), lignin, and hemicellulose, with trace amounts of extractives like resins and oils.
Foreign Matter: Low levels, often less than 0.5.
Density: Approximately 0.4 to 0.6 g/cm³.
Categories by User Need
For Animal Bedding
Pine Wood Sawdust: Soft and comfortable, provides good absorbency for livestock and mushroom cultivation.
Pros: Comfortable, absorbent, low-cost.
Cons: Higher moisture content can be an issue for some uses.
For Fuel Compositing
Sawdust: Ideal for biomass energy production and as a carbon-rich material in compost piles.
Pros: High calorific value, a good carbon source for compost.
Cons: Can have fluctuating moisture content, which affects its fuel efficiency.
For Woodworking Crafts
Super Fine Saw Dust: Used for filling gaps in flooring, screw holes, and other projects, as it takes stains well.
Pros: Fine particle size creates a paste for filling, blends seamlessly into wood.
Cons: Requires mixing with fillers or resins for structural applications.
Common Pine Sawdust Specifications
Wood Type: 100 Pine.
Particle Size: Variable, ranging from fine dust to larger shavings, but specific sizes such as 1-5mm are common for certain applications like flooring filler.
Moisture Content: Typically between 8 and 12, but can vary, influencing its density and absorbency.
Chemical Composition: Primarily cellulose (40-50), lignin, and hemicellulose, with trace amounts of extractives like resins and oils.
Foreign Matter: Low levels, often less than 0.5.
Density: Approximately 0.4 to 0.6 g/cm³.
Categories by User Need
For Animal Bedding
Pine Wood Sawdust: Soft and comfortable, provides good absorbency for livestock and mushroom cultivation.
Pros: Comfortable, absorbent, low-cost.
Cons: Higher moisture content can be an issue for some uses.
For Fuel Compositing
Sawdust: Ideal for biomass energy production and as a carbon-rich material in compost piles.
Pros: High calorific value, a good carbon source for compost.
Cons: Can have fluctuating moisture content, which affects its fuel efficiency.
For Woodworking Crafts
Super Fine Saw Dust: Used for filling gaps in flooring, screw holes, and other projects, as it takes stains well.
Pros: Fine particle size creates a paste for filling, blends seamlessly into wood.
Cons: Requires mixing with fillers or resins for structural applications.
We are actively looking for suppliers of the following materials for engineered flooring production:
1. Top Layer – European White Oak (Quercus robur / Quercus petraea)
Thickness: 3 mm and 4 mm
Widths: 175 mm, 206 mm, 258 mm, 310 mm
Lengths: 1800 mm to 2400 mm
Quality Grades: A, B, C, D, E, F
2. Bottom Layer – Birch Core Plywood
Thickness: 12 mm to 15 mm
Dimensions: Approximately 1250 mm x 2500 mm
Structure: Birch, Birch C, Phenolic Birch
We are seeking consistent suppliers capable of providing a monthly volume of approximately 20,000 m², with competitive pricing and stable quality.
If you are able to supply any of the materials listed above, please send us:
-Technical specifications
-Pricing per m²
-Available quantities per month
-Lead times and export conditions
We are looking for long-term partnerships with reliable manufacturers or exporters.
1. Top Layer – European White Oak (Quercus robur / Quercus petraea)
Thickness: 3 mm and 4 mm
Widths: 175 mm, 206 mm, 258 mm, 310 mm
Lengths: 1800 mm to 2400 mm
Quality Grades: A, B, C, D, E, F
2. Bottom Layer – Birch Core Plywood
Thickness: 12 mm to 15 mm
Dimensions: Approximately 1250 mm x 2500 mm
Structure: Birch, Birch C, Phenolic Birch
We are seeking consistent suppliers capable of providing a monthly volume of approximately 20,000 m², with competitive pricing and stable quality.
If you are able to supply any of the materials listed above, please send us:
-Technical specifications
-Pricing per m²
-Available quantities per month
-Lead times and export conditions
We are looking for long-term partnerships with reliable manufacturers or exporters.
Closed decking made of pine slats with tongue-and-groove joints. Suitable as a shelf in pallet racking (original application) or as a floorboard in tents, temporary flooring, or as a base for garden boxes, fencing, etc.
This decking consists of 1 piece.
Please note: for orders of up to 10 pieces, the decking will be split into 2 pieces (approximately 136 and 130 cm) for easier transport. The tongue and groove joint remains intact.
Physical dimensions: 2680 x 1050 mm or 2680 x 850 mm.
Suitable for a pallet rack/long-bay rack with a depth of 105 cm / 1050 mm
This decking consists of 1 piece.
Please note: for orders of up to 10 pieces, the decking will be split into 2 pieces (approximately 136 and 130 cm) for easier transport. The tongue and groove joint remains intact.
Physical dimensions: 2680 x 1050 mm or 2680 x 850 mm.
Suitable for a pallet rack/long-bay rack with a depth of 105 cm / 1050 mm
I offer a real barn board made of coniferous wood. This wood has been aged for decades in natural conditions, which gave it a unique texture, cracks, knots and natural patina.
Thickness: 7 mm, 15 mm, 20 mm
Width: 8 / 10 / 12 / 14 / 16 / 18 cm
Length: from 0.5 m to 2 m (can be customized to your size)
The natural texture and pattern of annual rings is perfect for:
wall and ceiling decor
furniture, panels
flooring, design of cafes, restaurants
Processing: hewn, brushed, heat treated (optional)
Application: walls, ceiling, furniture, beams, decor
Call or write - we will find the right option for you
Thickness: 7 mm, 15 mm, 20 mm
Width: 8 / 10 / 12 / 14 / 16 / 18 cm
Length: from 0.5 m to 2 m (can be customized to your size)
The natural texture and pattern of annual rings is perfect for:
wall and ceiling decor
furniture, panels
flooring, design of cafes, restaurants
Processing: hewn, brushed, heat treated (optional)
Application: walls, ceiling, furniture, beams, decor
Call or write - we will find the right option for you
we do birch plywood for flooring base
size:12202440
T: 9/12/15mm
size:12202440
T: 9/12/15mm
Our production workshops manufacture traditional Versailles parquet panels flooring.
Everything is made in a traditional, authentic way.
We use both solid new oak wood and reclaimed old oak wood to manufacture these Versailles parquet panels.
The usual dimensions of these panels are 1000100023 mm.
We also manufacture customized sizes of Versailles panels according to the specifications of each project.
Everything is made in a traditional, authentic way.
We use both solid new oak wood and reclaimed old oak wood to manufacture these Versailles parquet panels.
The usual dimensions of these panels are 1000100023 mm.
We also manufacture customized sizes of Versailles panels according to the specifications of each project.
The strand woven indoor flooring produced by our company is usually made of high quality moso bamboo (or other bamboo species with similar material properties) of more than four years of age in the local area, after a series of rigorous processes such as selection, steaming, drying, hot pressing, etc. The flooring is more wear-resistant than ordinary bamboo flooring, and is flat and smooth. More wear-resistant than ordinary bamboo flooring, but also smooth and flat, not moth-eaten, not deformed or cracked, elegant color, texture fresh and pleasing to the eye. Higher density, better moisture-proof performance, wider scope of application.