Purchase of hardwood firewood for heating during the winter. A framework agreement for 11 months (June 2026 - 30.04.2027) will be concluded with 1 economic operator.
Estimated value excluding VAT: 1 593 750,00 RON.
Estimated value excluding VAT: 1 593 750,00 RON.
Main type: Firewood Cleaved - Not Cleaved
Type: Firewood/Wood logs Cleaved
Specifications
Volume 10 - 12 4039;Container per month
Type of species European Hardwood
Species White Ash, Beech, Oak
Length 23-45 cm
Moisture content 12-20
Description: Firewood splitting is performed with professional equipment, but drying takes place in automated dryers.
Basic products:
birch, ash and alder firewood.
Type: Firewood/Wood logs Cleaved
Specifications
Volume 10 - 12 4039;Container per month
Type of species European Hardwood
Species White Ash, Beech, Oak
Length 23-45 cm
Moisture content 12-20
Description: Firewood splitting is performed with professional equipment, but drying takes place in automated dryers.
Basic products:
birch, ash and alder firewood.
At SECOMA, we focus on what truly matters: quality, consistency, and trust.
We supply European hardwood directly from factory, ensuring:
✔ Controlled quality from source
✔ Stable volumes for industrial needs
✔ Competitive pricing without intermediaries
Our range includes:
– European Beech (KD / Steamed)
– European Oak (Kiln-Dried)
– Square-edged Unedged Timber
We are expanding our client network and looking for serious long-term partners worldwide.
???? Contact us: secomaexport@outlook.com
We supply European hardwood directly from factory, ensuring:
✔ Controlled quality from source
✔ Stable volumes for industrial needs
✔ Competitive pricing without intermediaries
Our range includes:
– European Beech (KD / Steamed)
– European Oak (Kiln-Dried)
– Square-edged Unedged Timber
We are expanding our client network and looking for serious long-term partners worldwide.
???? Contact us: secomaexport@outlook.com
Hello,
we are a supplier from Romania.
We have been supplying the Turkish market since 2010 with hardwood logs.
We can offer high quality beech logs (mixed veneer, saw logs).
Specifications:
Diameter: 40–70 cm
Length: 2–8 m
Straight logs, good quality, suitable for veneer and high quality sawn timber.
Volume:
300 m³/month (constant supply).
In addition to beech, we also supply:
Linden (basswood)
Ash
Sycamore maple
Field maple
Occasionally oak.
Please let me know if you are interested, I can send photos and videos.
Best regards!
we are a supplier from Romania.
We have been supplying the Turkish market since 2010 with hardwood logs.
We can offer high quality beech logs (mixed veneer, saw logs).
Specifications:
Diameter: 40–70 cm
Length: 2–8 m
Straight logs, good quality, suitable for veneer and high quality sawn timber.
Volume:
300 m³/month (constant supply).
In addition to beech, we also supply:
Linden (basswood)
Ash
Sycamore maple
Field maple
Occasionally oak.
Please let me know if you are interested, I can send photos and videos.
Best regards!
Purchase of hardwood firewood.
Minimum quantity: 645 cubic meters.
Maximum quantity: 1000 cubic meters.
The firewood to be delivered will comply with the provisions of STAS 2340/1980 (category A - shaped hardwood hardwood, placed in stacks). This standard refers to wood of various hardwoods and softwoods, resulting from forestry operations and from cutting the excess lengths of logs, intended for fuel, called firewood. Category A includes shaped wood placed in stacks and double stacks - hardwood hardwoods, with a maximum of 10% softwood or softwoods.
Sterile shaped wood:
- length 1m+/-5cm
- thickness (with bark): round: 5...15 cm at the thin end; split (lobed): max. 30 cm width of the face.
Defects:
The firewood that is the subject of this specification cannot have the following defects:
- rot with cubic structure;
- fibrous rot, in compliance with the conditions specified in art.2.3 of STAS 2340/1980.
Shaping:
The trees are felled with a saw in forest exploitations and with an axe in groves, the wood remaining with bark, partially or completely peeled, as resulting from the exploitations.
The firewood shaped in steri must have the stumps cut down to the face of the wood. The ends of the firewood must be cut off with a saw, except for breaks and the end coming from the stump.
Firewood shaped into steri with a thickness of 16...25 cm must be split in two, that with a thickness of 26...40 cm must be split into four approximately equal pieces, and that with a thickness of 40 cm into so many pieces that the largest width of the split piece, measured at the thick end of the wood, does not exceed 30 cm.
The following conditions must also be observed: - the wood shaped into steri will be cut to 30 cm in length; - the diameter of the shaped wood will be between 5 and 25 cm, maximum 30 cm width of the face.
Humidity:
The humidity of the firewood covered by this specification is determined indirectly in relation to the weight of the ster, as shown below:
- the weight of the firewood at the time of delivery by the producer or distributor must not exceed, at a cubic factor of 0.62, the weight of 500 kg meter-ster of hard species without admixture of soft or resinous species.
In order to meet the above condition, the firewood covered by this specification must be very well dried (the trees must have been cut down at least one year before the date of delivery).
Minimum quantity: 645 cubic meters.
Maximum quantity: 1000 cubic meters.
The firewood to be delivered will comply with the provisions of STAS 2340/1980 (category A - shaped hardwood hardwood, placed in stacks). This standard refers to wood of various hardwoods and softwoods, resulting from forestry operations and from cutting the excess lengths of logs, intended for fuel, called firewood. Category A includes shaped wood placed in stacks and double stacks - hardwood hardwoods, with a maximum of 10% softwood or softwoods.
Sterile shaped wood:
- length 1m+/-5cm
- thickness (with bark): round: 5...15 cm at the thin end; split (lobed): max. 30 cm width of the face.
Defects:
The firewood that is the subject of this specification cannot have the following defects:
- rot with cubic structure;
- fibrous rot, in compliance with the conditions specified in art.2.3 of STAS 2340/1980.
Shaping:
The trees are felled with a saw in forest exploitations and with an axe in groves, the wood remaining with bark, partially or completely peeled, as resulting from the exploitations.
The firewood shaped in steri must have the stumps cut down to the face of the wood. The ends of the firewood must be cut off with a saw, except for breaks and the end coming from the stump.
Firewood shaped into steri with a thickness of 16...25 cm must be split in two, that with a thickness of 26...40 cm must be split into four approximately equal pieces, and that with a thickness of 40 cm into so many pieces that the largest width of the split piece, measured at the thick end of the wood, does not exceed 30 cm.
The following conditions must also be observed: - the wood shaped into steri will be cut to 30 cm in length; - the diameter of the shaped wood will be between 5 and 25 cm, maximum 30 cm width of the face.
Humidity:
The humidity of the firewood covered by this specification is determined indirectly in relation to the weight of the ster, as shown below:
- the weight of the firewood at the time of delivery by the producer or distributor must not exceed, at a cubic factor of 0.62, the weight of 500 kg meter-ster of hard species without admixture of soft or resinous species.
In order to meet the above condition, the firewood covered by this specification must be very well dried (the trees must have been cut down at least one year before the date of delivery).
Super quality hard essence firewood from Romania, for the cold season. We are a company with over 15 years experience and we sell the fire wood in the form of logs, logs or palletized firewood cut and prepared for immediate use. We offer delivery anywhere in Europe
Competitive prices: 119 euro/m³ transport.
For further information and orders, don’t hesitate to contact us
Competitive prices: 119 euro/m³ transport.
For further information and orders, don’t hesitate to contact us
Hello!
I am contacting you with a view to establishing a partnership for the purchase of new half pallets (600x800 mm), intended for export to a strategic customer in the Benelux area (Netherlands).
Given the volume of our current invoices, we are interested in a long-term collaboration for the following technical specification:
Type: Half pallet (600x800 mm), 5 upper elements.
Quantity: Initial order of 2,460 pieces (approx. 4 trucks), with potential for weekly/bimonthly delivery.
Treatment: Softwood/hardwood, heat treated according to ISPM 15 standard (IPPC marking mandatory).
Quality: Class II (Grade B) or mixed (sound wood, without structural defects).
Logistics: FCA pick-up (our own trucks will arrive at your factory for loading).
Please send us a price offer per piece (in EUR or RON) for this quantity. I would like to mention that we are in the process of selecting suppliers and are aiming for an extremely competitive price to cover the high logistics costs to the Netherlands.
I look forward to your response.
Best regards!
I am contacting you with a view to establishing a partnership for the purchase of new half pallets (600x800 mm), intended for export to a strategic customer in the Benelux area (Netherlands).
Given the volume of our current invoices, we are interested in a long-term collaboration for the following technical specification:
Type: Half pallet (600x800 mm), 5 upper elements.
Quantity: Initial order of 2,460 pieces (approx. 4 trucks), with potential for weekly/bimonthly delivery.
Treatment: Softwood/hardwood, heat treated according to ISPM 15 standard (IPPC marking mandatory).
Quality: Class II (Grade B) or mixed (sound wood, without structural defects).
Logistics: FCA pick-up (our own trucks will arrive at your factory for loading).
Please send us a price offer per piece (in EUR or RON) for this quantity. I would like to mention that we are in the process of selecting suppliers and are aiming for an extremely competitive price to cover the high logistics costs to the Netherlands.
I look forward to your response.
Best regards!
We can supply you AZOBE railway sleepers, which are highly regarded as the most durable and hardest wooden sleepers in the world.
It is naturally resistant to insect attack, rot and decay and can be used for underwater structures due it rots resistance.
Kindly reply us with your specifications and volume and we can discuss further. We look forward to hearing from you.
Regards!
It is naturally resistant to insect attack, rot and decay and can be used for underwater structures due it rots resistance.
Kindly reply us with your specifications and volume and we can discuss further. We look forward to hearing from you.
Regards!
Contract for the Supply of Hardwood Sleepers, Bearers and Longitudinal Timbers.
Estimated value excluding VAT: 1 000 000,00 EUR.
Estimated value excluding VAT: 1 000 000,00 EUR.
We are primary producers of exotic tropical hardwoods, both logs and sawn timber. We supply sawn timber, azobe, sapelli, iroko, sipo, bubinga, doussie, padouk, wenge etc. Our logs are of good diameter from 70cm depending on the species up to 140cm. Tali, Okan, Azobe, Ayous, Movingui, Dabema,etc. Our forests are rich and dense with over 32 species of african wood. Contact us for more information and photos. Regards.
We are primary producers of exotic tropical hardwoods, both logs and sawn timber. We supply sawn timber, azobe, sapelli, iroko, sipo, bubinga, doussie, padouk, wenge etc. Our logs are of good diameter from 70cm depending on the species up to 140cm. Tali, Okan, Azobe, Ayous, Movingui, Dabema,etc. Our forests are rich and dense with over 32 species of african wood. Contact us for more information and photos. Regards.