As Andrewpol wood company we mainly produce solid flooring (oak floorboard, oak parquet, ash parquet) as well as layered flooring. On top of our production we have added to the range of oak lamellas.
Lamella is defined as a few millimeters thick unfinished (wood layer) board, (not painted, not varnished, not oiled, with the possibility of two side or four side sanding) intended to be glued onto plywood with great accuracy in terms of dimensions, humidity and class selection. We produce lamellas in class I, II, III and REBUSTA (IV)
Our offer includes 3 mm to 7 mm thick lamellas in the following specification:
From about 3 mm 7 mm x 78 mm x (320-520) mm
From about 3 mm 7 mm x 100 mm x (520-1220) mm
From about 3 mm 7 mm x 110 mm x (530-2030 mm)
From about 3 mm 7 mm x 130 mm x (530-2630) mm
From about 3 mm 7 mm x 160 mm x (530-2630) mm
From about 3 mm 7 mm x 210, 230 mm x (530-2630) mm
If you do not find lamellas that meets your requirements for dimensions, class or final visual effect, please contact us and we can submit an offer according to your individual requirements !!!!
There is a possibility of production different size lamellas according to parameters selected by the customer.
Lamella is defined as a few millimeters thick unfinished (wood layer) board, (not painted, not varnished, not oiled, with the possibility of two side or four side sanding) intended to be glued onto plywood with great accuracy in terms of dimensions, humidity and class selection. We produce lamellas in class I, II, III and REBUSTA (IV)
Our offer includes 3 mm to 7 mm thick lamellas in the following specification:
From about 3 mm 7 mm x 78 mm x (320-520) mm
From about 3 mm 7 mm x 100 mm x (520-1220) mm
From about 3 mm 7 mm x 110 mm x (530-2030 mm)
From about 3 mm 7 mm x 130 mm x (530-2630) mm
From about 3 mm 7 mm x 160 mm x (530-2630) mm
From about 3 mm 7 mm x 210, 230 mm x (530-2630) mm
If you do not find lamellas that meets your requirements for dimensions, class or final visual effect, please contact us and we can submit an offer according to your individual requirements !!!!
There is a possibility of production different size lamellas according to parameters selected by the customer.
As Andrewpol wood company we mainly produce solid flooring (oak floorboard, oak parquet, ash parquet) as well as layered flooring. On top of our production we have added to the range of oak lamellas.
Lamella is defined as a few millimeters thick unfinished (wood layer) board, (not painted, not varnished, not oiled, with the possibility of two side or four side sanding) intended to be glued onto plywood with great accuracy in terms of dimensions, humidity and class selection. We produce lamellas in class I, II, III and REBUSTA (IV)
Our offer includes 3 mm to 7 mm thick lamellas in the following specification:
From about 3 mm 7 mm x 78 mm x (320-520) mm
From about 3 mm 7 mm x 100 mm x (520-1220) mm
From about 3 mm 7 mm x 110 mm x (530-2030 mm)
From about 3 mm 7 mm x 130 mm x (530-2630) mm
From about 3 mm 7 mm x 160 mm x (530-2630) mm
From about 3 mm 7 mm x 210, 230 mm x (530-2630) mm
If you do not find lamellas that meets your requirements for dimensions, class or final visual effect, please contact us and we can submit an offer according to your individual requirements !!!!
There is a possibility of production different size lamellas according to parameters selected by the customer.
Lamella is defined as a few millimeters thick unfinished (wood layer) board, (not painted, not varnished, not oiled, with the possibility of two side or four side sanding) intended to be glued onto plywood with great accuracy in terms of dimensions, humidity and class selection. We produce lamellas in class I, II, III and REBUSTA (IV)
Our offer includes 3 mm to 7 mm thick lamellas in the following specification:
From about 3 mm 7 mm x 78 mm x (320-520) mm
From about 3 mm 7 mm x 100 mm x (520-1220) mm
From about 3 mm 7 mm x 110 mm x (530-2030 mm)
From about 3 mm 7 mm x 130 mm x (530-2630) mm
From about 3 mm 7 mm x 160 mm x (530-2630) mm
From about 3 mm 7 mm x 210, 230 mm x (530-2630) mm
If you do not find lamellas that meets your requirements for dimensions, class or final visual effect, please contact us and we can submit an offer according to your individual requirements !!!!
There is a possibility of production different size lamellas according to parameters selected by the customer.
We are a wood factory established in 1989. We are specialized in a professional production of all wooden floors, such as oak parquet, ash parquet, solid floorboards, layered boards, oiled floors, palace patterns, antiqued floors, stairs, finishing elements and lamella.
All our products can be purchased at three options of choice: for further sanding and finishing to your own preference, prepared for oiling or varnishing (product is beveled, sanded, antiqued etc.) or oiled and ready for assembling.
We hope that our many years of our experience in woodworking will meet your appreciation and will result in cooperation. We offer you the highest quality products and attractive prices in return.
Parquet a traditional parquet is made in various sizes with a maximum length of 500 mm (we produce longer sizes on request) and two thickness sizes of 22 mm and 16 mm.
Oak parquet dimension 500 x 70 x 22 mm
Oak parquet dimension 420 x 70 x 22 mm
Oak parquet dimension 400 x 70 x 22 mm
Oak parquet dimension 350 x 70 x 22 mm
Oak parquet dimension 360 x 60 x 22 mm
Oak parquet dimension 300 x 70 x 300 mm
Oak parquet dimension 250x 70 x 22 mm
Oak parquet dimension 300 x 60 x 22 mm
Oak parquet dimension 500 x 70 x 16 mm
Oak parquet dimension 350 x 70 x 16 mm
Oak parquet dimension 300 x 60 x 16 mm
Wooden floors on an individual order.
If you can not find floorboard meeting your requirements for dimensions, class or final visual effect, please contact us, so we can present the offer according to your individual requirements !!!!
All our products can be purchased at three options of choice: for further sanding and finishing to your own preference, prepared for oiling or varnishing (product is beveled, sanded, antiqued etc.) or oiled and ready for assembling.
We hope that our many years of our experience in woodworking will meet your appreciation and will result in cooperation. We offer you the highest quality products and attractive prices in return.
Parquet a traditional parquet is made in various sizes with a maximum length of 500 mm (we produce longer sizes on request) and two thickness sizes of 22 mm and 16 mm.
Oak parquet dimension 500 x 70 x 22 mm
Oak parquet dimension 420 x 70 x 22 mm
Oak parquet dimension 400 x 70 x 22 mm
Oak parquet dimension 350 x 70 x 22 mm
Oak parquet dimension 360 x 60 x 22 mm
Oak parquet dimension 300 x 70 x 300 mm
Oak parquet dimension 250x 70 x 22 mm
Oak parquet dimension 300 x 60 x 22 mm
Oak parquet dimension 500 x 70 x 16 mm
Oak parquet dimension 350 x 70 x 16 mm
Oak parquet dimension 300 x 60 x 16 mm
Wooden floors on an individual order.
If you can not find floorboard meeting your requirements for dimensions, class or final visual effect, please contact us, so we can present the offer according to your individual requirements !!!!
ANDREWPOL wood factory was established in 1989. We specialize in a professional production of all wooden floors, such as oak parquet, ash parquet, solid floorboards, layered boards, oiled floors, palace patterns, antiqued floors, stairs, finishing elements and lamella.
All our products can be purchased at three options of choice: for further sanding and finishing to your own preference, prepared for oiling or varnishing (product is beveled, sanded, antiqued etc.) or oiled and ready for assembling.
We hope that our many years of our experience in woodworking will meet your appreciation and will result in cooperation. We offer you the highest quality products and attractive prices in return.
To meet the expectations of our customers we decided to expand our product range by another product, which is layered parquet.Our layered flooring consists of two layers:
Top wear layer
Bottom layer made of birch waterproof plywood
Thanks to using of two layers of wood (different kinds) parquet is extremely durable, flexible and stable regarding the surrounding environment (high or low humidity).
The wear layer has got a thickness about 3 mm to 6 mm and is made of oak wood which is characterized by high durability and timeless look. To reduce the penetration of moisture from the substrate and to provide more stability to the parquet floor in the second layer we used waterproof birch plywood. For gluing these two layers, we use precisely cut material strictly according to technological standards, using the best adhesives available on the market.
Thanks to the use of two layers where the bottom part is cross-bounded, the durability of the layered floor increases. The parquet becomes more stable and better suited for rooms where the laying of a solid parquet floor has not brought a particular result, eg. in areas with high variability of humidity and temperature.
To high temperature, as in the case of a solid board, can cause drying and cracking of wood. High humidity will cause swelling of wood. It is believed that the optimum room temperature should be within the range of 19 22 degrees Celsius and humidity of 45 60%.
Floor made of layered wood can be classified as wood floor and can be finished the same way as solid wood floor, using either oil or varnish. On individual customers request, we offer the service of edges chamfering (two-sided or four-sided) and the service of antiquing.
In addition, you can order a parquet with expansion cuts on the bottom side of the layered board.
All our products can be purchased at three options of choice: for further sanding and finishing to your own preference, prepared for oiling or varnishing (product is beveled, sanded, antiqued etc.) or oiled and ready for assembling.
We hope that our many years of our experience in woodworking will meet your appreciation and will result in cooperation. We offer you the highest quality products and attractive prices in return.
To meet the expectations of our customers we decided to expand our product range by another product, which is layered parquet.Our layered flooring consists of two layers:
Top wear layer
Bottom layer made of birch waterproof plywood
Thanks to using of two layers of wood (different kinds) parquet is extremely durable, flexible and stable regarding the surrounding environment (high or low humidity).
The wear layer has got a thickness about 3 mm to 6 mm and is made of oak wood which is characterized by high durability and timeless look. To reduce the penetration of moisture from the substrate and to provide more stability to the parquet floor in the second layer we used waterproof birch plywood. For gluing these two layers, we use precisely cut material strictly according to technological standards, using the best adhesives available on the market.
Thanks to the use of two layers where the bottom part is cross-bounded, the durability of the layered floor increases. The parquet becomes more stable and better suited for rooms where the laying of a solid parquet floor has not brought a particular result, eg. in areas with high variability of humidity and temperature.
To high temperature, as in the case of a solid board, can cause drying and cracking of wood. High humidity will cause swelling of wood. It is believed that the optimum room temperature should be within the range of 19 22 degrees Celsius and humidity of 45 60%.
Floor made of layered wood can be classified as wood floor and can be finished the same way as solid wood floor, using either oil or varnish. On individual customers request, we offer the service of edges chamfering (two-sided or four-sided) and the service of antiquing.
In addition, you can order a parquet with expansion cuts on the bottom side of the layered board.
ANDREWPOL wood factory was established in 1989. We specialize in a professional production of all wooden floors, such as oak parquet, ash parquet, solid floorboards, layered boards, oiled floors, palace patterns, antiqued floors, stairs, finishing elements and lamella.
All our products can be purchased at three options of choice: for further sanding and finishing to your own preference, prepared for oiling or varnishing (product is beveled, sanded, antiqued etc.) or oiled and ready for assembling.
We hope that our many years of our experience in woodworking will meet your appreciation and will result in cooperation. We offer you the highest quality products and attractive prices in return.
In order to meet the expectations of our customers, we decided to expand our product range by another product such as layered floorboard.
The layered floorboard is available in width from 70 mm to 230 mm, length from 500 mm to 2500 mm, thickness from 12 mm to 22 mm or other on request.
The layered floorboards we produce consist of two layers:
Top wear layer
Bottom birch waterproof plywood layered
Thanks to the use of two layers of wood (different types) the board is extremely durable, flexible and stable regarding to prevailing environmental conditions (excessive or insufficient humidity).
The wear layer has a thickness of about 3 mm to 6 mm and is made of oak wood which is characterized by high durability and timeless appearance. Our offer also includes layered ash boards and other wood types for individual customers orders. To reduce the penetration of moisture from the substrate and to provide more stability we used waterproof birch plywood as a bottom layer. For gluing these two layers, we use precisely cut material strictly according to technological standards, using the best adhesives available on the market.
Thanks to the use of two layers where the bottom part is cross-bounded, the durability of the layered floor increases. The parquet becomes more stable and better suited for rooms where the laying of a solid parquet floor has not brought a particular result, eg. in areas with high variability of humidity and temperature.
To high temperature, as in the case of a solid board, can cause drying and cracking of wood. High humidity will cause swelling of wood. It is believed that the optimum room temperature should be within the range of 19 22 degrees Celsius and humidity of 45 60%.
Floor made of layered wood can be classified as wood floor and can be finished the same way as solid wood floor, using either oil or varnish. On individual customers request, we offer the service of edges chamfering (two-sided or four-sided) and the service of antiquing.
In addition, you can order a parquet with expansion cuts on the bottom side of the layered board.
All our products can be purchased at three options of choice: for further sanding and finishing to your own preference, prepared for oiling or varnishing (product is beveled, sanded, antiqued etc.) or oiled and ready for assembling.
We hope that our many years of our experience in woodworking will meet your appreciation and will result in cooperation. We offer you the highest quality products and attractive prices in return.
In order to meet the expectations of our customers, we decided to expand our product range by another product such as layered floorboard.
The layered floorboard is available in width from 70 mm to 230 mm, length from 500 mm to 2500 mm, thickness from 12 mm to 22 mm or other on request.
The layered floorboards we produce consist of two layers:
Top wear layer
Bottom birch waterproof plywood layered
Thanks to the use of two layers of wood (different types) the board is extremely durable, flexible and stable regarding to prevailing environmental conditions (excessive or insufficient humidity).
The wear layer has a thickness of about 3 mm to 6 mm and is made of oak wood which is characterized by high durability and timeless appearance. Our offer also includes layered ash boards and other wood types for individual customers orders. To reduce the penetration of moisture from the substrate and to provide more stability we used waterproof birch plywood as a bottom layer. For gluing these two layers, we use precisely cut material strictly according to technological standards, using the best adhesives available on the market.
Thanks to the use of two layers where the bottom part is cross-bounded, the durability of the layered floor increases. The parquet becomes more stable and better suited for rooms where the laying of a solid parquet floor has not brought a particular result, eg. in areas with high variability of humidity and temperature.
To high temperature, as in the case of a solid board, can cause drying and cracking of wood. High humidity will cause swelling of wood. It is believed that the optimum room temperature should be within the range of 19 22 degrees Celsius and humidity of 45 60%.
Floor made of layered wood can be classified as wood floor and can be finished the same way as solid wood floor, using either oil or varnish. On individual customers request, we offer the service of edges chamfering (two-sided or four-sided) and the service of antiquing.
In addition, you can order a parquet with expansion cuts on the bottom side of the layered board.
ANDREWPOL wood factory was established in 1989. We specialize in a professional production of all wooden floors, such as oak parquet, ash parquet, solid floorboards, layered boards, oiled floors, palace patterns, antiqued floors, stairs, finishing elements and lamella.
All our products can be purchased at three options of choice: for further sanding and finishing to your own preference, prepared for oiling or varnishing (product is beveled, sanded, antiqued etc.) or oiled and ready for assembling.
Palace design parquet is an exclusive product which is used mainly in lounges, palaces, banquet or conference halls and ballrooms. It is a classic elegance that is being used in ordinary houses and even in flats. Palace floor, thanks to its original appearance, often becomes the main decoration in the whole room, and the effect we get from the combinations used impresses at first sight.
There is the freedom of design, the combination of wood types and patterns in lying such a floor. The only condition is high aesthetics matching the interior.
Thanks to the experience and skills of our carpenters, each board fits perfectly. More complicated floor designs can be put together by us in special patterns so called coffers.
Wooden coffers are elegant and exclusive products that bring out the original character of the interior.
The decorative floor pattern can be selected from available designs or made to individual order of the customer.
The palace and ornamental floors can be made of solid as well as layered floorboards.
They can be subjected to additional services such as:
Chamfering
Grinding
Filling
Antiquing (manual or mechanical)
All our products can be purchased at three options of choice: for further sanding and finishing to your own preference, prepared for oiling or varnishing (product is beveled, sanded, antiqued etc.) or oiled and ready for assembling.
Palace design parquet is an exclusive product which is used mainly in lounges, palaces, banquet or conference halls and ballrooms. It is a classic elegance that is being used in ordinary houses and even in flats. Palace floor, thanks to its original appearance, often becomes the main decoration in the whole room, and the effect we get from the combinations used impresses at first sight.
There is the freedom of design, the combination of wood types and patterns in lying such a floor. The only condition is high aesthetics matching the interior.
Thanks to the experience and skills of our carpenters, each board fits perfectly. More complicated floor designs can be put together by us in special patterns so called coffers.
Wooden coffers are elegant and exclusive products that bring out the original character of the interior.
The decorative floor pattern can be selected from available designs or made to individual order of the customer.
The palace and ornamental floors can be made of solid as well as layered floorboards.
They can be subjected to additional services such as:
Chamfering
Grinding
Filling
Antiquing (manual or mechanical)
ANDREWPOL wood factory was established in 1989. We specialize in a professional production of all wooden floors, such as oak parquet, ash parquet, solid floorboards, layered boards, oiled floors, palace patterns, antiqued floors, stairs, finishing elements and lamella.
All our products can be purchased at three options of choice: for further sanding and finishing to your own preference, prepared for oiling or varnishing (product is beveled, sanded, antiqued etc.) or oiled and ready for assembling.
French / Hungarian fir designs are recommended for exclusive and stylish interiors and spacious rooms. It is a pattern of laying wooden floors used for some time ago, but now it re-enters our homes and makes a splash. Although it is considered very classic, it matches with modern interiors beautifully.
French fir is a special layout of the board with edges cut at a 45 angle.
Depending on the angle of the cut we distinguish the Hungarian fir (cutting angle 60 ) and French fir (cutting angle 45 ). When the staves are laid, their shorter sides resemble the arrowhead, forming a continuous zig-zag pattern, with a straight line between them.
There are different ways of arranging fir, including the classic (laying the left right staves in the traditional way), you can also use the board separating the staves.
French fir is available in a solid board or layered board version.
Standard fir dimensions are within the following limits:
Thickness: 15 or 21 mm
Width: 70 150 mm
Length: 500 1000 mm
It can be subjected to additional services such as:
Chamfering
Grinding
Filling
Antiquing (manual or mechanical)
Oil finishing.
If you do not find a floorboard that meets your requirements for dimensions, class or final visual effect, please contact us and we can submit an offer according to your individual requirements !!!!
All our products can be purchased at three options of choice: for further sanding and finishing to your own preference, prepared for oiling or varnishing (product is beveled, sanded, antiqued etc.) or oiled and ready for assembling.
French / Hungarian fir designs are recommended for exclusive and stylish interiors and spacious rooms. It is a pattern of laying wooden floors used for some time ago, but now it re-enters our homes and makes a splash. Although it is considered very classic, it matches with modern interiors beautifully.
French fir is a special layout of the board with edges cut at a 45 angle.
Depending on the angle of the cut we distinguish the Hungarian fir (cutting angle 60 ) and French fir (cutting angle 45 ). When the staves are laid, their shorter sides resemble the arrowhead, forming a continuous zig-zag pattern, with a straight line between them.
There are different ways of arranging fir, including the classic (laying the left right staves in the traditional way), you can also use the board separating the staves.
French fir is available in a solid board or layered board version.
Standard fir dimensions are within the following limits:
Thickness: 15 or 21 mm
Width: 70 150 mm
Length: 500 1000 mm
It can be subjected to additional services such as:
Chamfering
Grinding
Filling
Antiquing (manual or mechanical)
Oil finishing.
If you do not find a floorboard that meets your requirements for dimensions, class or final visual effect, please contact us and we can submit an offer according to your individual requirements !!!!
Wood ANDREWPOL Department was established in 1989. We specialize in a professional production of all wood flooring, such as hardwood, parquet flooring ash and the release of natural and modified. An important part of our production are also stairs and finishing elements.
Welcome to our website www.andrewpol.com.pl
We make the standard steps in Class I and Class II, stairs retro in Class I and II, box stairs, racks and carpet. We complete all of the wood railing and in connection with the metal. We have all the elements of the stairs and floor finishes.
An important part of the production are both stairs and laid directly onto concrete and self-supporting.
Stairs are glued from several balikw. The customer can specify their preferences and in accordance with the elements are selected in terms of coloring and grain of the wood chips. Stairs are sold complete with risers, or the same degree. Average width of the stairs is 30cm.
All products are made from a material seasoned and dried in special ovens for drying hardwood.
We hope that our many years of experience in woodworking meet your reputation and result in cooperation, in return, we offer you the highest quality merchandise and reasonable prices.
Welcome to our website www.andrewpol.com.pl
We make the standard steps in Class I and Class II, stairs retro in Class I and II, box stairs, racks and carpet. We complete all of the wood railing and in connection with the metal. We have all the elements of the stairs and floor finishes.
An important part of the production are both stairs and laid directly onto concrete and self-supporting.
Stairs are glued from several balikw. The customer can specify their preferences and in accordance with the elements are selected in terms of coloring and grain of the wood chips. Stairs are sold complete with risers, or the same degree. Average width of the stairs is 30cm.
All products are made from a material seasoned and dried in special ovens for drying hardwood.
We hope that our many years of experience in woodworking meet your reputation and result in cooperation, in return, we offer you the highest quality merchandise and reasonable prices.
Solid Oak Chevron Parquet
Dimensions: 15x90x510/610 mm
• Prime grade (no visible color variation, no knots allowed): €38
• Select/AB grade (sound knots up to 10 mm, dark knots up to 2 mm, color variation allowed): €33
• Natural/B grade (sound knots up to 15 mm, dark knots up to 6 mm, irregular grain): €27
• Rustic/C grade (sound knots up to 25 mm, dark knots up to 12 mm, filled heartwood): €22
• Super Rustic/RD grade (no restrictions on knots, dark knots up to 20 mm, heartwood, sapwood, insect marks allowed): €15
Modular Versailles Parquet
Dimensions: 15x1000x1000 mm
• Prime grade: €52
• Natural grade: €41
• Rustic grade: €30
• Super Rustic grade: €23
We can also produce herringbone parquet and random length boards in widths of 90 / 120 / 140 / 180 mm
Dimensions: 15x90x510/610 mm
• Prime grade (no visible color variation, no knots allowed): €38
• Select/AB grade (sound knots up to 10 mm, dark knots up to 2 mm, color variation allowed): €33
• Natural/B grade (sound knots up to 15 mm, dark knots up to 6 mm, irregular grain): €27
• Rustic/C grade (sound knots up to 25 mm, dark knots up to 12 mm, filled heartwood): €22
• Super Rustic/RD grade (no restrictions on knots, dark knots up to 20 mm, heartwood, sapwood, insect marks allowed): €15
Modular Versailles Parquet
Dimensions: 15x1000x1000 mm
• Prime grade: €52
• Natural grade: €41
• Rustic grade: €30
• Super Rustic grade: €23
We can also produce herringbone parquet and random length boards in widths of 90 / 120 / 140 / 180 mm
Hello, we are looking for spruce veneer as backing for parquet.
Thickness: 2mm.
Width: 197mm.
Lenght: 2025mm.
MC:Â 8 (/-1).
We are interessted in full truck orders.
Please, let me know your possibilities.
Is it possible to get some samples immediately (200 pieces)?
I´m looking forward hearing from you.
Thank you.
Thickness: 2mm.
Width: 197mm.
Lenght: 2025mm.
MC:Â 8 (/-1).
We are interessted in full truck orders.
Please, let me know your possibilities.
Is it possible to get some samples immediately (200 pieces)?
I´m looking forward hearing from you.
Thank you.
Opportunity! I have stock of kiln-dried parquet strips - oak, maple, ash, cherry and walnut.