Mutala School is a school with 110 pupils, which also operates a 3-group daycare. The building`s heat source is currently oil. Ylöjärvi is a HINKU municipality, and the aim is to replace oil heating with heat production using wood chips or pellets as a heat source.
The subject of the procurement is the delivery of wood pellets to the sites of the Niinisalo local unit of the Defence Properties Western Finland service area.
The estimated procurement quantities are roughly estimated at 450 tonnes/year, approximately 10 full trailer loads/year.
The wood pellets must meet the following quality requirements:
- The size class of the pellets must be D08.
- The fines F must be 1.0 wt-% in the incoming state.
- The ash A must be 0.7 wt-% of the dry matter.
- The moisture M must be 10 wt-% in the incoming state, of the wet weight.
- The effective calorific value, Q must be 16.5 MJ/kg in the incoming state.
The contract does not include a quantity purchase obligation.
Estimated value excluding VAT: 600 000,00 EUR.
Duration: 48 Months.
The estimated procurement quantities are roughly estimated at 450 tonnes/year, approximately 10 full trailer loads/year.
The wood pellets must meet the following quality requirements:
- The size class of the pellets must be D08.
- The fines F must be 1.0 wt-% in the incoming state.
- The ash A must be 0.7 wt-% of the dry matter.
- The moisture M must be 10 wt-% in the incoming state, of the wet weight.
- The effective calorific value, Q must be 16.5 MJ/kg in the incoming state.
The contract does not include a quantity purchase obligation.
Estimated value excluding VAT: 600 000,00 EUR.
Duration: 48 Months.
Hello! What would be the price for 5 tons of pellets with delivery to Dambovita, Raciu? Thank you.
Purchase of pellets 2025 with the following technical specifications:
- material: softwood
- packaging method: 15 kg bags
- humidity: max. 10%
- ash content: max. 0.7%
- net calorific value: min. 4.6 kwh / kg
- diameter: 6mm +/- 1 mm
- length: max. 45 mm
- EN Plus A1 certificate or equivalent.
Minimum quantity: 5 320.
Maximum quantity: 22 823.
Duration: 13 Months.
Maximum value of the framework agreement: 570 575,00 RON.
- material: softwood
- packaging method: 15 kg bags
- humidity: max. 10%
- ash content: max. 0.7%
- net calorific value: min. 4.6 kwh / kg
- diameter: 6mm +/- 1 mm
- length: max. 45 mm
- EN Plus A1 certificate or equivalent.
Minimum quantity: 5 320.
Maximum quantity: 22 823.
Duration: 13 Months.
Maximum value of the framework agreement: 570 575,00 RON.
Straw-sawdust pellet press Series 34;PellTech34; model: GRD-0.5
Pelletizing line for biomass pellets up to 250 kg/hour
Pellet diameter: 6-8 mm
10 years experience, 12 months warranty
Created in the Czech Republic - Assembled in the EU and Ukraine
Pelletizing line for biomass pellets up to 250 kg/hour
Pellet diameter: 6-8 mm
10 years experience, 12 months warranty
Created in the Czech Republic - Assembled in the EU and Ukraine
Complete pellet line - Straw pellet production factory up to 500-700 kg/hour 8mm pellets
MiniComplex Pellet Press - flat rotary mold 8mm - GFD-0.7 - 55kW
Raw material homogenization bunker Volume 3 cubic meters -6kW
Straw bale chopping complex CGS-1 - 80 kW
Total installed power 140 kW. Consumption 50-70 kW/h
12-month guarantee from the commissioning of the straw pellet pelletizing line
Services: Pelletizing line automation, Spare parts, Training
Cost-effective accessories: Raw material humidification, Automation, Bunker overload sensor
Counter-cost: Aerodynamic straw dryer DAD-0.6-1.2 humidity up to 35 - 20kW
MiniComplex Pellet Press - flat rotary mold 8mm - GFD-0.7 - 55kW
Raw material homogenization bunker Volume 3 cubic meters -6kW
Straw bale chopping complex CGS-1 - 80 kW
Total installed power 140 kW. Consumption 50-70 kW/h
12-month guarantee from the commissioning of the straw pellet pelletizing line
Services: Pelletizing line automation, Spare parts, Training
Cost-effective accessories: Raw material humidification, Automation, Bunker overload sensor
Counter-cost: Aerodynamic straw dryer DAD-0.6-1.2 humidity up to 35 - 20kW
Minicomplex pellet press Series 34;PellTech34; model: GFD-0.7 Rotary flat die
Technical features of the pellet press:
Productivity of pellets up to: 500 - 700 kg/hour depending on the raw material and diameter of the mold hole.
Optional Productivity of feed granules up to: 500 - 1500 kg/hour depending on the raw material and the diameter of the mold hole.
Flat mold diameter: 400 mm
Pellet diameter: 6-8-10 mm
Adjustable pellet length: 15 - 30 mm
Main Engine - 1 X 45 kW slow start with soft-starter
Total installed power - 55 kW
Three-phase current - 400V, coil voltage 24V/230V within /- 5, frequency 50 Hz
Dimensions: 7500 X 2500 X 3000
Weight: 3500kg
The moisture content of the raw material: 12-14-16 - moisture influences the quality, productivity of pellets
Raw material size: 3 - 5 mm
Pellet density at the exit from the pellet press up to 1250 kg/m3
Big-Bags bulk density up to 700 kg/m3
Type of raw material: wood sawdust (granulation 3-5mm, 70 hard essence and 30 resinous, optional 1.0-1.5 dextrin, steam generator), cereal straw, cereals, alfalfa, fodder and other waste from biomass.
Each raw material has different conicities and dimensions in the rotary flat mold
The technology used since 2023
Pellet press mini complex - Pellet production press consists of:
- Hopper with feed auger with raw material
-Mini food snail components (lignin, dextrin, bran, etc.)
-Auger mixing with raw material humidification system
- Automated pellet press oil lubrication system
-Oil cooling radiator with fan
- Pellet press
-Rotating flat mold with 2/4 fixed rollers (manual pneumatic greasing every 2/4 hours, without stopping production, Timken bearings, Total Ceran XM460 Vaseline)
-Vibrating ring
- The dust exhaust system
- Pellet conveyor belt with dust extraction
- Electric command and control panel, Eaton soft starter, with 10 meter three-phase cable
Technical features of the pellet press:
Productivity of pellets up to: 500 - 700 kg/hour depending on the raw material and diameter of the mold hole.
Optional Productivity of feed granules up to: 500 - 1500 kg/hour depending on the raw material and the diameter of the mold hole.
Flat mold diameter: 400 mm
Pellet diameter: 6-8-10 mm
Adjustable pellet length: 15 - 30 mm
Main Engine - 1 X 45 kW slow start with soft-starter
Total installed power - 55 kW
Three-phase current - 400V, coil voltage 24V/230V within /- 5, frequency 50 Hz
Dimensions: 7500 X 2500 X 3000
Weight: 3500kg
The moisture content of the raw material: 12-14-16 - moisture influences the quality, productivity of pellets
Raw material size: 3 - 5 mm
Pellet density at the exit from the pellet press up to 1250 kg/m3
Big-Bags bulk density up to 700 kg/m3
Type of raw material: wood sawdust (granulation 3-5mm, 70 hard essence and 30 resinous, optional 1.0-1.5 dextrin, steam generator), cereal straw, cereals, alfalfa, fodder and other waste from biomass.
Each raw material has different conicities and dimensions in the rotary flat mold
The technology used since 2023
Pellet press mini complex - Pellet production press consists of:
- Hopper with feed auger with raw material
-Mini food snail components (lignin, dextrin, bran, etc.)
-Auger mixing with raw material humidification system
- Automated pellet press oil lubrication system
-Oil cooling radiator with fan
- Pellet press
-Rotating flat mold with 2/4 fixed rollers (manual pneumatic greasing every 2/4 hours, without stopping production, Timken bearings, Total Ceran XM460 Vaseline)
-Vibrating ring
- The dust exhaust system
- Pellet conveyor belt with dust extraction
- Electric command and control panel, Eaton soft starter, with 10 meter three-phase cable
Minicomplex pellet press Series 34;PellTech34; model: GFD-0.5
Biomass pelletizing line up to 300-500 kg/hour
Pellet diameter: 6-8 mm
10 years experience, 12 months warranty
Pellet press mini complex - Pellet production press consists of:
- Hopper with feed auger with raw material
-Auger mixing with raw material humidification system
-Automated pellet press oil lubrication system
-Oil cooling radiator with fan
- Pellet press
-Rotating flat mold with 2 fixed rollers (manual pneumatic greasing every 2/4 hours, without stopping production, Timken bearings, Total Ceran XM460 Vaseline)
-Vibrating ring
- The dust exhaust system
- Pellet conveyor belt with dust extraction
- Electric command and control panel, Eaton soft starter, with 10 meter three-phase cable
Optional accessories for the pellet press:
Pellet press modification kit in feed granulator
Steam generator
Raw material humidification system
Roller greasing system: automated
Mini food snail components (lignin, dextrin, bran, etc.)
Bunker (Silo) homogenization of dry raw material for pellet press from 3 m.cubic volume
Pellet cooler volume 3 cubic meters Pellet transport belt
Rollers, flat molds with 6-8-10 mm holes
Frequency converter
Semi-automated bagging of pellet bags
Biomass pelletizing line up to 300-500 kg/hour
Pellet diameter: 6-8 mm
10 years experience, 12 months warranty
Pellet press mini complex - Pellet production press consists of:
- Hopper with feed auger with raw material
-Auger mixing with raw material humidification system
-Automated pellet press oil lubrication system
-Oil cooling radiator with fan
- Pellet press
-Rotating flat mold with 2 fixed rollers (manual pneumatic greasing every 2/4 hours, without stopping production, Timken bearings, Total Ceran XM460 Vaseline)
-Vibrating ring
- The dust exhaust system
- Pellet conveyor belt with dust extraction
- Electric command and control panel, Eaton soft starter, with 10 meter three-phase cable
Optional accessories for the pellet press:
Pellet press modification kit in feed granulator
Steam generator
Raw material humidification system
Roller greasing system: automated
Mini food snail components (lignin, dextrin, bran, etc.)
Bunker (Silo) homogenization of dry raw material for pellet press from 3 m.cubic volume
Pellet cooler volume 3 cubic meters Pellet transport belt
Rollers, flat molds with 6-8-10 mm holes
Frequency converter
Semi-automated bagging of pellet bags
PellTech straw pellet press machine model GFD-0.4 Farmer
Uniform pellet pressing head with 2/4 rollers, roller greasing without stopping production
Production of biomass pellets up to 400 kg/hour
Frequency converter 30 kW - reduces reactive energy to 0 Ron
Pellet diameter: 6 mm sawdust or 8 mm straw
Experience 10 years Warranty 12 months PJ / 24 months PF
Created in the Czech Republic - Assembled in the EU and Ukraine
The standard pellet production press consists of:
- Pellet press GFD-0.4 fully equipped and checked
- Electric control panel with frequency converter for the main electric motor
-Flat mold extraction device
- Manual greasing pump 4kg, without Total Ceran XM460 vaseline
-User manual
-Certified warranty
Optional accessories for the pellet press:
Bunker (Silo) raw material homogenization for pellet press, volume 0.4 cubic m
Water dosing pump
Uniform pellet pressing head with 2/4 rollers, roller greasing without stopping production
Production of biomass pellets up to 400 kg/hour
Frequency converter 30 kW - reduces reactive energy to 0 Ron
Pellet diameter: 6 mm sawdust or 8 mm straw
Experience 10 years Warranty 12 months PJ / 24 months PF
Created in the Czech Republic - Assembled in the EU and Ukraine
The standard pellet production press consists of:
- Pellet press GFD-0.4 fully equipped and checked
- Electric control panel with frequency converter for the main electric motor
-Flat mold extraction device
- Manual greasing pump 4kg, without Total Ceran XM460 vaseline
-User manual
-Certified warranty
Optional accessories for the pellet press:
Bunker (Silo) raw material homogenization for pellet press, volume 0.4 cubic m
Water dosing pump
The pellet production press consists of:
- Pellet press GFD-0.2 fully equipped and checked
- Electric control panel with frequency converter for the main electric motor
- Flat mold extraction device
- Manual greasing pump 4kg, without Total Ceran XM460 vaseline
- User manual
- Certified warranty
- Pellet press GFD-0.2 fully equipped and checked
- Electric control panel with frequency converter for the main electric motor
- Flat mold extraction device
- Manual greasing pump 4kg, without Total Ceran XM460 vaseline
- User manual
- Certified warranty