Hello!
I am interested in acacia beams 2.5 m long and 1.2 m wide.
Thank you!
I am interested in acacia beams 2.5 m long and 1.2 m wide.
Thank you!
Purchase of hardwood firewood.
Minimum quantity: 645 cubic meters.
Maximum quantity: 1000 cubic meters.
The firewood to be delivered will comply with the provisions of STAS 2340/1980 (category A - shaped hardwood hardwood, placed in stacks). This standard refers to wood of various hardwoods and softwoods, resulting from forestry operations and from cutting the excess lengths of logs, intended for fuel, called firewood. Category A includes shaped wood placed in stacks and double stacks - hardwood hardwoods, with a maximum of 10% softwood or softwoods.
Sterile shaped wood:
- length 1m+/-5cm
- thickness (with bark): round: 5...15 cm at the thin end; split (lobed): max. 30 cm width of the face.
Defects:
The firewood that is the subject of this specification cannot have the following defects:
- rot with cubic structure;
- fibrous rot, in compliance with the conditions specified in art.2.3 of STAS 2340/1980.
Shaping:
The trees are felled with a saw in forest exploitations and with an axe in groves, the wood remaining with bark, partially or completely peeled, as resulting from the exploitations.
The firewood shaped in steri must have the stumps cut down to the face of the wood. The ends of the firewood must be cut off with a saw, except for breaks and the end coming from the stump.
Firewood shaped into steri with a thickness of 16...25 cm must be split in two, that with a thickness of 26...40 cm must be split into four approximately equal pieces, and that with a thickness of 40 cm into so many pieces that the largest width of the split piece, measured at the thick end of the wood, does not exceed 30 cm.
The following conditions must also be observed: - the wood shaped into steri will be cut to 30 cm in length; - the diameter of the shaped wood will be between 5 and 25 cm, maximum 30 cm width of the face.
Humidity:
The humidity of the firewood covered by this specification is determined indirectly in relation to the weight of the ster, as shown below:
- the weight of the firewood at the time of delivery by the producer or distributor must not exceed, at a cubic factor of 0.62, the weight of 500 kg meter-ster of hard species without admixture of soft or resinous species.
In order to meet the above condition, the firewood covered by this specification must be very well dried (the trees must have been cut down at least one year before the date of delivery).
Minimum quantity: 645 cubic meters.
Maximum quantity: 1000 cubic meters.
The firewood to be delivered will comply with the provisions of STAS 2340/1980 (category A - shaped hardwood hardwood, placed in stacks). This standard refers to wood of various hardwoods and softwoods, resulting from forestry operations and from cutting the excess lengths of logs, intended for fuel, called firewood. Category A includes shaped wood placed in stacks and double stacks - hardwood hardwoods, with a maximum of 10% softwood or softwoods.
Sterile shaped wood:
- length 1m+/-5cm
- thickness (with bark): round: 5...15 cm at the thin end; split (lobed): max. 30 cm width of the face.
Defects:
The firewood that is the subject of this specification cannot have the following defects:
- rot with cubic structure;
- fibrous rot, in compliance with the conditions specified in art.2.3 of STAS 2340/1980.
Shaping:
The trees are felled with a saw in forest exploitations and with an axe in groves, the wood remaining with bark, partially or completely peeled, as resulting from the exploitations.
The firewood shaped in steri must have the stumps cut down to the face of the wood. The ends of the firewood must be cut off with a saw, except for breaks and the end coming from the stump.
Firewood shaped into steri with a thickness of 16...25 cm must be split in two, that with a thickness of 26...40 cm must be split into four approximately equal pieces, and that with a thickness of 40 cm into so many pieces that the largest width of the split piece, measured at the thick end of the wood, does not exceed 30 cm.
The following conditions must also be observed: - the wood shaped into steri will be cut to 30 cm in length; - the diameter of the shaped wood will be between 5 and 25 cm, maximum 30 cm width of the face.
Humidity:
The humidity of the firewood covered by this specification is determined indirectly in relation to the weight of the ster, as shown below:
- the weight of the firewood at the time of delivery by the producer or distributor must not exceed, at a cubic factor of 0.62, the weight of 500 kg meter-ster of hard species without admixture of soft or resinous species.
In order to meet the above condition, the firewood covered by this specification must be very well dried (the trees must have been cut down at least one year before the date of delivery).
We buy firewood chips for the needs of the Lejasciems boiler house.
The subject of the order is the purchase of wood for cargo support.
We constantly buy large quantities of new Europallets, UIC and EPAL.
DAP or EXW.
Thank you
DAP or EXW.
Thank you
We buy NON-EURO 1200x800 pallets, mixed, both heavy and light, constantly throughout the year.
We are waiting for your offer, quantities and photos of the stock by email.
thank you
We are waiting for your offer, quantities and photos of the stock by email.
thank you
We buy industrial pallets 1200x1000, very large quantities throughout the year.
Please email the current stock, pictures and price.
thank you
Please email the current stock, pictures and price.
thank you
We buy atypical / special / custom pallets, both new and second-hand.
Please send the information by email, stock, quantity and price, together with some pictures and their technical sketches.
thank you
Please send the information by email, stock, quantity and price, together with some pictures and their technical sketches.
thank you
Hello!
We are a company established in Ploiesti, Prahova, Romania; our main activity is selling wooden products, new and used EPAL, europallets and special pallets (atypical).
Currently, we sell around 150.000 pallets / month, new and used.
We work with some companies in Serbia and we would like to expand our list of suppliers.
If you want to start a partnership with us, please, send us some details :
- Price for New EPAL, first and second class
- New UIC first and second class
- Used first class Europallets (white)
- Used second class Europallets (dark).
Also, provide us the volume you can sustain for each product.
If you can produce for us new special pallets, please request us sketches and quantities, also please provide the location of picking the goods.
We kindly wait for your reply hoping for a long term partnership with your company.
Please note that:
We are waiting for your best prices, because we already work with other Serbian suppliers for over 5 years.
We are a company established in Ploiesti, Prahova, Romania; our main activity is selling wooden products, new and used EPAL, europallets and special pallets (atypical).
Currently, we sell around 150.000 pallets / month, new and used.
We work with some companies in Serbia and we would like to expand our list of suppliers.
If you want to start a partnership with us, please, send us some details :
- Price for New EPAL, first and second class
- New UIC first and second class
- Used first class Europallets (white)
- Used second class Europallets (dark).
Also, provide us the volume you can sustain for each product.
If you can produce for us new special pallets, please request us sketches and quantities, also please provide the location of picking the goods.
We kindly wait for your reply hoping for a long term partnership with your company.
Please note that:
We are waiting for your best prices, because we already work with other Serbian suppliers for over 5 years.
Renovation of wooden footbridges in Dzintari Forest Park, Jurmala
Supply of heating fuel (ENplus-A1 pellets) to various work centers of the Provincial Council of Ourense.
Estimated value excluding VAT: 261 072,00 EUR.
Estimated value excluding VAT: 261 072,00 EUR.