Dear Sir or Madam,
We are a wholesale supplier of pallet timber and supply a large number of EUR/EPAL pallet repair companies and pallet manufacturers.
We are currently looking for regular suppliers of pallet boards in full truckload quantities for the following dimensions:
- 1200 × 143 × 22 mm
- 1200 × 98 × 22 mm
- 800 × 143 × 22 mm.
Please quote separately for:
- Fresh-sawn material
- Kiln-dried material
- 1st choice quality
- 2nd choice quality
- Boards with chamfered edges, if available.
Please provide your best price per m³ EXW your mill, available monthly volume, minimum order quantity and loading location.
We are also interested in other standard pallet board dimensions, pallet timber and cut-to-length sawn timber an briquettes and pellets that you can supply in full truckloads.
We are looking for reliable long-term suppliers and would be pleased to receive your offer.
Best regards
We are a wholesale supplier of pallet timber and supply a large number of EUR/EPAL pallet repair companies and pallet manufacturers.
We are currently looking for regular suppliers of pallet boards in full truckload quantities for the following dimensions:
- 1200 × 143 × 22 mm
- 1200 × 98 × 22 mm
- 800 × 143 × 22 mm.
Please quote separately for:
- Fresh-sawn material
- Kiln-dried material
- 1st choice quality
- 2nd choice quality
- Boards with chamfered edges, if available.
Please provide your best price per m³ EXW your mill, available monthly volume, minimum order quantity and loading location.
We are also interested in other standard pallet board dimensions, pallet timber and cut-to-length sawn timber an briquettes and pellets that you can supply in full truckloads.
We are looking for reliable long-term suppliers and would be pleased to receive your offer.
Best regards
Dear Supplier,
Good day. We are a leading manufacturer of wooden brooms and brushes and would like to buy treated sawn timber and finish wooden backs (Birch wood or similar wood type). Please, quote for full container loads. Our monthly requirement is 2x40 containers.
WOODEN PLANKS
• 26 X 69 X Longer Length in mm ( No minus measurements , cracks , breakable knots , moisture content less than 15 )
• 30 X 69 X Longer Length in mm ( No minus measurements , cracks , breakable knots , moisture content less than 15 )
FINISH PRODUCTS
• 22 X 65 X 1220 / 915 / 610 mm ( 4 side planned with edges rounded along the length ) – Tolerance ( No minus measurements , up to 0.5 mm in width and thickness , 1 mm in length ).
Good day. We are a leading manufacturer of wooden brooms and brushes and would like to buy treated sawn timber and finish wooden backs (Birch wood or similar wood type). Please, quote for full container loads. Our monthly requirement is 2x40 containers.
WOODEN PLANKS
• 26 X 69 X Longer Length in mm ( No minus measurements , cracks , breakable knots , moisture content less than 15 )
• 30 X 69 X Longer Length in mm ( No minus measurements , cracks , breakable knots , moisture content less than 15 )
FINISH PRODUCTS
• 22 X 65 X 1220 / 915 / 610 mm ( 4 side planned with edges rounded along the length ) – Tolerance ( No minus measurements , up to 0.5 mm in width and thickness , 1 mm in length ).
Hi,
I would need 6mm pure oak pellets for smoking bbq grill for food produce, so no addatives, wood bark etc.
Can you supply them and how much it would cost shipping etc.? I would prefer 15kg bags in package.
Best regards.
I would need 6mm pure oak pellets for smoking bbq grill for food produce, so no addatives, wood bark etc.
Can you supply them and how much it would cost shipping etc.? I would prefer 15kg bags in package.
Best regards.
The firewood shall consist of hard deciduous species (oak, Turkey oak, hornbeam, elm, black locust, beech), with a minimum diameter of 10 cm and a maximum length of 1 m.
Maximum moisture content: 15–25%.
Delivery of wood showing signs of rot is not accepted.
Maximum moisture content: 15–25%.
Delivery of wood showing signs of rot is not accepted.
Hello!
We need 2 full trucks of Europaletts every month.
Can you give me an offer, please?
Thank you!
We need 2 full trucks of Europaletts every month.
Can you give me an offer, please?
Thank you!
Hardwood firewood (beech), cut and split.
The logs will be approximately 50–60 cm in length and 20–30 cm in width.
The moisture content of the wood will be between 20% and 40%.
The logs will be approximately 50–60 cm in length and 20–30 cm in width.
The moisture content of the wood will be between 20% and 40%.
We buy structural timber directly from manufacturers and depots, and we are looking for a regular supplier, not a single order.
WHAT WE NEED
1 - Glued laminated timber GL24h or GL24c, spruce or pine, for the main trusses. Sections around 140 x 240 mm.
2 - Solid structural timber KVH C24, finger jointed, for the secondary structure at 80 cm centres. Sections around 100 x 120 mm and 80 x 160 mm.
3 - Tongue and groove boards and battens, if you produce or stock them.
HOW WE WANT IT QUOTED
- STRAIGHT beams only. No curves, no CNC, no cutting to length, no planing to size, no coating, no finishing. We cut everything ourselves on site.
- THE LOWEST GRADE YOU PRODUCE. Industrial quality, non visual. Knots, patches, colour differences, visible finger joints, rough surface and small end splits are all acceptable to us.
- BAR LENGTHS OF 6,00 m AND 7,00 m. These two lengths are what our roof needs. A 13 m bar cut down to 7 m leaves us with almost half the volume as waste, which we pay for and cannot use. If you only run 13 m or 13,50 m, please say so and quote your price per m3 anyway, we will decide.
- Full truck load quantity, and repeated loads over the year.
ONE REQUIREMENT IS NOT NEGOTIABLE
The timber goes into a load bearing roof in Italy, so we need CE marking and a Declaration of Performance to EN 14080 for the glulam and to EN 15497 or EN 14081 for the solid timber, with the declared strength class stated on the DoP. If you cannot supply the CE marking and the DoP, please tell us straight away: we would not be allowed to install the material, and neither of us should spend time on it.
THE QUESTION WE CARE ABOUT MOST
If you make or stock a DIFFERENT PRODUCT WITH THE SAME STRUCTURAL PERFORMANCE AT A LOWER PRICE, please quote that instead of, or beside, what we asked for.
A lower grade, a different species, a different bar length, a different section, a stock lot you want to clear, an item that is standard for you and therefore cheap: we are interested in all of it, as long as the CE marking and the declared strength class are there.
PLEASE QUOTE
1 - EUR per m3, EXW your works, for the glulam sections above
2 - EUR per m3, EXW your works, for the KVH C24 sections above
3 - the same prices DAP Chieri, 10023 Turin, Italy
4 - the volume of one full truck load and your minimum order
5 - your price if we commit to several truck loads over a year
6 - what you can deliver from stock and in how many days
We are registered for intra EU VAT (VIES), so please quote without VAT.
A short answer with real numbers is all we need to start.
Best regards
WHAT WE NEED
1 - Glued laminated timber GL24h or GL24c, spruce or pine, for the main trusses. Sections around 140 x 240 mm.
2 - Solid structural timber KVH C24, finger jointed, for the secondary structure at 80 cm centres. Sections around 100 x 120 mm and 80 x 160 mm.
3 - Tongue and groove boards and battens, if you produce or stock them.
HOW WE WANT IT QUOTED
- STRAIGHT beams only. No curves, no CNC, no cutting to length, no planing to size, no coating, no finishing. We cut everything ourselves on site.
- THE LOWEST GRADE YOU PRODUCE. Industrial quality, non visual. Knots, patches, colour differences, visible finger joints, rough surface and small end splits are all acceptable to us.
- BAR LENGTHS OF 6,00 m AND 7,00 m. These two lengths are what our roof needs. A 13 m bar cut down to 7 m leaves us with almost half the volume as waste, which we pay for and cannot use. If you only run 13 m or 13,50 m, please say so and quote your price per m3 anyway, we will decide.
- Full truck load quantity, and repeated loads over the year.
ONE REQUIREMENT IS NOT NEGOTIABLE
The timber goes into a load bearing roof in Italy, so we need CE marking and a Declaration of Performance to EN 14080 for the glulam and to EN 15497 or EN 14081 for the solid timber, with the declared strength class stated on the DoP. If you cannot supply the CE marking and the DoP, please tell us straight away: we would not be allowed to install the material, and neither of us should spend time on it.
THE QUESTION WE CARE ABOUT MOST
If you make or stock a DIFFERENT PRODUCT WITH THE SAME STRUCTURAL PERFORMANCE AT A LOWER PRICE, please quote that instead of, or beside, what we asked for.
A lower grade, a different species, a different bar length, a different section, a stock lot you want to clear, an item that is standard for you and therefore cheap: we are interested in all of it, as long as the CE marking and the declared strength class are there.
PLEASE QUOTE
1 - EUR per m3, EXW your works, for the glulam sections above
2 - EUR per m3, EXW your works, for the KVH C24 sections above
3 - the same prices DAP Chieri, 10023 Turin, Italy
4 - the volume of one full truck load and your minimum order
5 - your price if we commit to several truck loads over a year
6 - what you can deliver from stock and in how many days
We are registered for intra EU VAT (VIES), so please quote without VAT.
A short answer with real numbers is all we need to start.
Best regards
Hello. We are interested in EPAL pallets - first class. If you can give us good price for bulk offers, please contact us. Thanks!
Hello
We would like to purchase acacia or oak logs - 4 meters in length and 30–40 cm in diameter.
If you can supply these, please contact us for details.
Thank you
We would like to purchase acacia or oak logs - 4 meters in length and 30–40 cm in diameter.
If you can supply these, please contact us for details.
Thank you
We intend to purchase softwood lumber, 25 mm thick, with the following specifications:
- wood species: spruce / fir,
- dried, unplaned wood
- maximum accepted moisture content: 14%
- length: 4000 mm
- width: 200–300 mm.
- wood species: spruce / fir,
- dried, unplaned wood
- maximum accepted moisture content: 14%
- length: 4000 mm
- width: 200–300 mm.
Contract description:
135 cubic meters of hardwood firewood (beech, sessile oak), with a minimum diameter of 15 cm and a maximum length of 1 m.
The wood may be delivered as logs and cut to the required dimensions at the beneficiary`s premises.
135 cubic meters of hardwood firewood (beech, sessile oak), with a minimum diameter of 15 cm and a maximum length of 1 m.
The wood may be delivered as logs and cut to the required dimensions at the beneficiary`s premises.