This contract covers the delivery of biomass in the form of pellets for a period of exactly one year, commencing on the date of the first delivery.
The estimated quantity of pellets to be delivered over the 12-month period corresponds to approximately 64,000 MWh (gross calorific value). This quantity is indicative only, as potential shutdowns due to technical issues or other causes are unpredictable.
Deliveries will begin on 15 November 2026.
The estimated quantity of pellets to be delivered over the 12-month period corresponds to approximately 64,000 MWh (gross calorific value). This quantity is indicative only, as potential shutdowns due to technical issues or other causes are unpredictable.
Deliveries will begin on 15 November 2026.
High-Quality Wood Briquettes (RUF, Nestro Pini-Kay)
• Types Available: RUF (brick-shaped), Nestro (cylindrical/chunky), and Pini-Kay (extruded hexagonal with a center air hole).
• Quality Material: 100 clean wood sawdust with no chemical glues or additives.
• High Efficiency: Low moisture content (7–12) with high calorific value (approx. 4,400–4,600 kcal / 17.5–19.5 MJ/kg) for long burn times and minimal ash.
• Best Uses: Ideal for fireplaces, wood-burning stoves, boilers, and pizza ovens.
• Packaging: Standard 10 kg bags / pallet options available.
• Types Available: RUF (brick-shaped), Nestro (cylindrical/chunky), and Pini-Kay (extruded hexagonal with a center air hole).
• Quality Material: 100 clean wood sawdust with no chemical glues or additives.
• High Efficiency: Low moisture content (7–12) with high calorific value (approx. 4,400–4,600 kcal / 17.5–19.5 MJ/kg) for long burn times and minimal ash.
• Best Uses: Ideal for fireplaces, wood-burning stoves, boilers, and pizza ovens.
• Packaging: Standard 10 kg bags / pallet options available.
Wood pellets are small, cylindrical eco-friendly biofuels made from compressed sawmill sawdust and wood shavings without chemical binders.
Offer
• Product: Premium Wood Pellets (ENplus A1 Certified)
• Material: 100 pure, untreated wood residue and sawmill by-products (low ash content)
• Shape Size: Cylindrical pellets (typically 6 mm to 8 mm in diameter)
• Key Properties: High calorific/heating value, low moisture content (
Offer
• Product: Premium Wood Pellets (ENplus A1 Certified)
• Material: 100 pure, untreated wood residue and sawmill by-products (low ash content)
• Shape Size: Cylindrical pellets (typically 6 mm to 8 mm in diameter)
• Key Properties: High calorific/heating value, low moisture content (
Delivery of wood pellets to institutions of the Augšdaugava Municipality
I am interested in purchasing oak logs (saw logs) with a top diameter of 35 cm or larger, classes I, II and III (or quality grades A, B, and C). The required lengths are 2.50 m and 3.00 m. What can you offer I will be transporting the goods to Romania, as my wood processing plant is located there.
Minimum technical specifications:
- material: spruce and fir wood
- product type: dried, unplaned
- color: natural
- thickness: 46 mm
- width: 250 mm
- length: 4000 mm
- moisture content: natural
- quality: G4.0–G4.2, or C22/C24 for structural use
- application: joinery, carpentry, construction.
- material: spruce and fir wood
- product type: dried, unplaned
- color: natural
- thickness: 46 mm
- width: 250 mm
- length: 4000 mm
- moisture content: natural
- quality: G4.0–G4.2, or C22/C24 for structural use
- application: joinery, carpentry, construction.
I have acacia poles available. If you`re interested. Regards.
Firewood processed into steres must have knots trimmed flush with the wood surface.
Deliveries of stumps, branches, or bark are not accepted.
Firewood ends must be saw-cut, except for natural breaks and the end originating from the stump.
Firewood processed into steres with a thickness of 16–25 cm must be split in two; pieces 26–40 cm thick must be split into four approximately equal parts; and pieces over 40 cm thick must be split into enough parts so that the greatest width of any split piece—measured at the thick end of the wood—does not exceed 20 cm.
Additionally, the following conditions must be met:
- Wood processed into steres shall be cut to a length of 30–33 cm;
- The diameter of the processed wood shall be between 5 and 25 cm, with a maximum face width of 20 cm.
Deliveries of stumps, branches, or bark are not accepted.
Firewood ends must be saw-cut, except for natural breaks and the end originating from the stump.
Firewood processed into steres with a thickness of 16–25 cm must be split in two; pieces 26–40 cm thick must be split into four approximately equal parts; and pieces over 40 cm thick must be split into enough parts so that the greatest width of any split piece—measured at the thick end of the wood—does not exceed 20 cm.
Additionally, the following conditions must be met:
- Wood processed into steres shall be cut to a length of 30–33 cm;
- The diameter of the processed wood shall be between 5 and 25 cm, with a maximum face width of 20 cm.
Hardwood (black locust, beech, oak) for stove heating, cut and split, with transport included—including unloading, weighing, and processing into logs with a length of 30–40 cm and a diameter of 10–15 cm.
Low moisture content is required to ensure compliance with the conditions specified in STAS 2340-80:
- maximum water content between 10% and 20%;
- delivery of wood showing signs of rot is not accepted; compliance with the conditions set out in Art. 2.3 of STAS 2340-80 is required.
Low moisture content is required to ensure compliance with the conditions specified in STAS 2340-80:
- maximum water content between 10% and 20%;
- delivery of wood showing signs of rot is not accepted; compliance with the conditions set out in Art. 2.3 of STAS 2340-80 is required.
Total volume of processed wood offered for auction/negotiation: 200 m³ of softwood, comprising:
- roundwood (broadleaved and softwood) for construction: 100 m³; firewood: 100 m³.
- roundwood (broadleaved and softwood) for construction: 100 m³; firewood: 100 m³.
Dear Sir / Madam
We are BEIRA BRUSH PVT LTD a leading manufacturer of wooden brooms and brushes for export market. We would like to get quotations for following sizes. Moisture content must be less than 13 . Damage timber is not allowed ( splits , large knots , soft knots , large tapping marks etc ) . Size tolerance in width and thickness minus zero, plus up to 5 mm. Length minus zero, plus up to 12 mm.
1. 26 x 70 x 635 / 940 / 1225 mm ( T X W X L )
2. 30 x 70 x 635 / 940 / 1225 mm ( T X W X L )
3. 38 x 94 x 435 / 870 mm ( T X W X L )
4 53 x 102 x 335 / 670 mm ( T X W X L )
We buy these sizes in 4039; container loads. Initially we will order 1x4039; container per month and after 4 months depending on the quality and shipping lead time we will order 2 x 4039; container a month.
Please quote the price under FOB and CIF Incoterms. Our port of discharge is Colombo , Sri Lanka.
Regards
Prasad Perera
We are BEIRA BRUSH PVT LTD a leading manufacturer of wooden brooms and brushes for export market. We would like to get quotations for following sizes. Moisture content must be less than 13 . Damage timber is not allowed ( splits , large knots , soft knots , large tapping marks etc ) . Size tolerance in width and thickness minus zero, plus up to 5 mm. Length minus zero, plus up to 12 mm.
1. 26 x 70 x 635 / 940 / 1225 mm ( T X W X L )
2. 30 x 70 x 635 / 940 / 1225 mm ( T X W X L )
3. 38 x 94 x 435 / 870 mm ( T X W X L )
4 53 x 102 x 335 / 670 mm ( T X W X L )
We buy these sizes in 4039; container loads. Initially we will order 1x4039; container per month and after 4 months depending on the quality and shipping lead time we will order 2 x 4039; container a month.
Please quote the price under FOB and CIF Incoterms. Our port of discharge is Colombo , Sri Lanka.
Regards
Prasad Perera