Specification:
- the types of hardwood accepted will be: beech, oak, hornbeam, etc.
- the firewood will be cut into logs with dimensions between 25-40 cm long
- the firewood will have a maximum humidity of 30% (open-air dried wood has a humidity of 12-15%) and a maximum allowed rot of 20%.
- the types of hardwood accepted will be: beech, oak, hornbeam, etc.
- the firewood will be cut into logs with dimensions between 25-40 cm long
- the firewood will have a maximum humidity of 30% (open-air dried wood has a humidity of 12-15%) and a maximum allowed rot of 20%.
Hardwood firewood supply. Details on request.
Firewood purchase - hardwood: beech, acacia, ash, maple, elm, hornbeam, oak.
The delivered firewood will be cut to a size between 30 cm and a maximum of 45 cm for terracotta stoves.
The delivered firewood will be cut to a size between 30 cm and a maximum of 45 cm for terracotta stoves.
Technical characteristics and delivery conditions:
- Firewood will be of quality I, category A, from hardwood species, namely: beech, oak, hornbeam, ash and maple, dried, without admixture of softwood or resinous species.
- Degraded products are not accepted. The wood must be healthy and not show traces of rot with a cubic structure or fibrous rot.
- Branches, tree bark and other inappropriate materials are not accepted.
- The products offered and delivered will comply with the technical requirements provided in STAS 2340-80, to the extent that its provisions are applicable to the requested products.
- The wood will be delivered with a length between 25 and 50 cm, depending on the needs communicated in the orders sent by the purchaser, and will be cracked, so that they can be inserted into the heating plants.
- Firewood will be of quality I, category A, from hardwood species, namely: beech, oak, hornbeam, ash and maple, dried, without admixture of softwood or resinous species.
- Degraded products are not accepted. The wood must be healthy and not show traces of rot with a cubic structure or fibrous rot.
- Branches, tree bark and other inappropriate materials are not accepted.
- The products offered and delivered will comply with the technical requirements provided in STAS 2340-80, to the extent that its provisions are applicable to the requested products.
- The wood will be delivered with a length between 25 and 50 cm, depending on the needs communicated in the orders sent by the purchaser, and will be cracked, so that they can be inserted into the heating plants.
I hope you are doing well.
We are working as sourcing agents for one of the leading importers of softwood timber in Pakistan and are currently looking to establish reliable supply sources.
We are interested in purchasing sawn timber with the following specifications:
Species: Spruce / Pine
Length: 3.0 meters up
Dimensions: Thickness 22-30mm Width 100/125/150/175/200mm
Grade: VI grade / SF grade
Volume: e.g., 500–1000 CBM per shipment
Packing: Export standard packing suitable for container shipment
Destination: CFR Karachi, Pakistan
Kindly provide:
Your quotation (CFR basis preferred)
Available dimensions and grading details
Photos of recent similar shipments (if available)
Earliest shipment schedule
We are looking for a long-term business relationship, and regular volumes can be discussed upon successful trial order.
We are working as sourcing agents for one of the leading importers of softwood timber in Pakistan and are currently looking to establish reliable supply sources.
We are interested in purchasing sawn timber with the following specifications:
Species: Spruce / Pine
Length: 3.0 meters up
Dimensions: Thickness 22-30mm Width 100/125/150/175/200mm
Grade: VI grade / SF grade
Volume: e.g., 500–1000 CBM per shipment
Packing: Export standard packing suitable for container shipment
Destination: CFR Karachi, Pakistan
Kindly provide:
Your quotation (CFR basis preferred)
Available dimensions and grading details
Photos of recent similar shipments (if available)
Earliest shipment schedule
We are looking for a long-term business relationship, and regular volumes can be discussed upon successful trial order.
Hello! I am interested in oak finger jointed panels 18x1250x6000 and 43x1250x6000. Please let me know your price. Thank you!
Circular edge banding machine for sale with 2 movable blades, Drozdowski brand.
Edging width: 45 cm.
Edging height: 10 cm.
Accessories: 2 lasers and remote control.
Price: 10,000 EUR VAT.
Edging width: 45 cm.
Edging height: 10 cm.
Accessories: 2 lasers and remote control.
Price: 10,000 EUR VAT.
Hardwood firewood (beech, oak, hornbeam) shaped - 40,400 kg.
Length: max. 25 cm.
Thickness (with bark): max. l5 cm on the cut surface.
ANOMALIES Sl DEFECTS. Firewood of all categories may have all anomalies and defects, except for crumbly and fibrous rot.
SHAPING. Shaped firewood must have stumps cut to the face of the wood and a maximum thickness of 25 cm. Logs with a thickness greater than 15 cm will be split so that the shaped wood does not exceed 15 cm at the thick end.
QUALITY. The product must comply with all norms, standards, orders or other regulations specific to them, the economic operator being obliged to present quality and conformity certificates.
The physical, chemical and bacteriological properties are guaranteed by the supplier through its own control and are verified in the event of a dispute at the request of the beneficiary and at the supplier`s expense.
Length: max. 25 cm.
Thickness (with bark): max. l5 cm on the cut surface.
ANOMALIES Sl DEFECTS. Firewood of all categories may have all anomalies and defects, except for crumbly and fibrous rot.
SHAPING. Shaped firewood must have stumps cut to the face of the wood and a maximum thickness of 25 cm. Logs with a thickness greater than 15 cm will be split so that the shaped wood does not exceed 15 cm at the thick end.
QUALITY. The product must comply with all norms, standards, orders or other regulations specific to them, the economic operator being obliged to present quality and conformity certificates.
The physical, chemical and bacteriological properties are guaranteed by the supplier through its own control and are verified in the event of a dispute at the request of the beneficiary and at the supplier`s expense.
Dear Ladies and Gentlemen,
we require 150 square meters of chestnut wood, with the dimensions of around 2 m x 26.5 mm. This wood is needed to replace the existing wood on the terrace of our restaurant. Unfortunately, chestnut wood is not available in Austria.
Could you please confirm if you deliver to Austria (south of Graz at the Slovenian border)?
Kindly provide us with a complete price quote, including delivery costs.
Thank you for your attention to this matter.
Best regards!
we require 150 square meters of chestnut wood, with the dimensions of around 2 m x 26.5 mm. This wood is needed to replace the existing wood on the terrace of our restaurant. Unfortunately, chestnut wood is not available in Austria.
Could you please confirm if you deliver to Austria (south of Graz at the Slovenian border)?
Kindly provide us with a complete price quote, including delivery costs.
Thank you for your attention to this matter.
Best regards!
Wood pellets are a high-efficiency, eco-friendly biomass fuel made from compressed sawdust and wood shavings. They are a clean-burning, renewable energy source widely used for heating in residential, commercial, and industrial applications. These pellets are cylindrical in shape, uniform in size, and offer consistent performance in modern pellet stoves, boilers, and furnaces. Their low moisture content ensures high combustion efficiency, making them an ideal alternative to traditional fossil fuels.
Wood pellets are also easy to handle, store, and transport, with minimal ash residue after burning. They contribute significantly to reducing greenhouse gas emissions and help in maintaining a sustainable energy cycle.
Specifications:
Diameter: 6mm or 8mm
Length: 10mm to 40mm
Moisture Content: ≤10
Ash Content: ≤1.5
Calorific Value: ≥4,600 Kcal/kg
Bulk Density: ≥600 kg/m³
Material: 100 natural wood (hardwood/softwood blend)
Additives: None – pure compressed biomass
Packing Options: 15kg bags, jumbo bags, or as required
Usage: Home heating, industrial boilers, biomass power plants
These pellets are designed to deliver reliable and efficient heating performance while promoting environmental sustainability.
Wood pellets are also easy to handle, store, and transport, with minimal ash residue after burning. They contribute significantly to reducing greenhouse gas emissions and help in maintaining a sustainable energy cycle.
Specifications:
Diameter: 6mm or 8mm
Length: 10mm to 40mm
Moisture Content: ≤10
Ash Content: ≤1.5
Calorific Value: ≥4,600 Kcal/kg
Bulk Density: ≥600 kg/m³
Material: 100 natural wood (hardwood/softwood blend)
Additives: None – pure compressed biomass
Packing Options: 15kg bags, jumbo bags, or as required
Usage: Home heating, industrial boilers, biomass power plants
These pellets are designed to deliver reliable and efficient heating performance while promoting environmental sustainability.
STANDARDS AND REGULATIONS:
STAS 2340-80 (category A - shaped wood laid in stacks and doubles - hardwood hardwood stacks).
This standard refers to wood of any species resulting from forestry operations and from cutting off the excess lengths of logs, intended for fuel, called firewood.
Firewood is divided as follows:
- category A includes shaped wood laid in stacks and doubles - hardwood hardwood stacks, with a maximum of 10% softwood or softwood wood;
- hardwood hardwood stacks, with a maximum of 10% wood with a thickness of 5 cm at the thin end, split (lobed): max. 30 cm face width.
TECHNICAL REQUIREMENTS:
- Firewood must be cut to 30 cm in length and split/cracked to a maximum thickness of 20 cm. It must also be placed on pallets so that it can be measured upon delivery.
ANOMALIES AND DEFECTS:
- Firewood of all categories may have all anomalies and defects, except for brittle and fibrous rot.
SHAPING:
- Firewood may remain with the bark, partially or completely peeled, as resulting from exploitation.
- Firewood shaped into steri and double-steri must have the stumps cut to the face of the wood.
- The ends of the firewood must be sawn off, except for breaks and the end coming from the stump.
MOISTURE:
- The moisture content of firewood in categories A is established indirectly in relation to the weight of the stack, as shown below.
- The weight of firewood in categories A, at the time of delivery by the producer or distributor, must not exceed, at a cubic factor of 0.62 m³.
STAS 2340-80 (category A - shaped wood laid in stacks and doubles - hardwood hardwood stacks).
This standard refers to wood of any species resulting from forestry operations and from cutting off the excess lengths of logs, intended for fuel, called firewood.
Firewood is divided as follows:
- category A includes shaped wood laid in stacks and doubles - hardwood hardwood stacks, with a maximum of 10% softwood or softwood wood;
- hardwood hardwood stacks, with a maximum of 10% wood with a thickness of 5 cm at the thin end, split (lobed): max. 30 cm face width.
TECHNICAL REQUIREMENTS:
- Firewood must be cut to 30 cm in length and split/cracked to a maximum thickness of 20 cm. It must also be placed on pallets so that it can be measured upon delivery.
ANOMALIES AND DEFECTS:
- Firewood of all categories may have all anomalies and defects, except for brittle and fibrous rot.
SHAPING:
- Firewood may remain with the bark, partially or completely peeled, as resulting from exploitation.
- Firewood shaped into steri and double-steri must have the stumps cut to the face of the wood.
- The ends of the firewood must be sawn off, except for breaks and the end coming from the stump.
MOISTURE:
- The moisture content of firewood in categories A is established indirectly in relation to the weight of the stack, as shown below.
- The weight of firewood in categories A, at the time of delivery by the producer or distributor, must not exceed, at a cubic factor of 0.62 m³.