We produce charcoal from the Pini & Kay briquette (Pini-kay) with high physico-chemical performance by special technology.
Advantages of briquetted charcoal:
" do not spark when burning;
" they are not crushed during transportation;
" Charcoal briquettes do not dust;
" Qualitative indicators are not inferior to the original raw materials;
" By the time of burning and calorific value;
" Exceed charcoal at times.
We are a company engaged in the production and export of briquettes and pellets. We are looking for partners to sell our products, charcoal briquette. In turn, we offer favorable conditions for work, and a proper approach to business management. Packaging possible in boxes with your logo or clear. We have experience working with a European buyer, sales, production and logistics. Welcome long-term cooperation. You can contact with me by mail or phone (Viber, WhatsApp).
Advantages of briquetted charcoal:
" do not spark when burning;
" they are not crushed during transportation;
" Charcoal briquettes do not dust;
" Qualitative indicators are not inferior to the original raw materials;
" By the time of burning and calorific value;
" Exceed charcoal at times.
We are a company engaged in the production and export of briquettes and pellets. We are looking for partners to sell our products, charcoal briquette. In turn, we offer favorable conditions for work, and a proper approach to business management. Packaging possible in boxes with your logo or clear. We have experience working with a European buyer, sales, production and logistics. Welcome long-term cooperation. You can contact with me by mail or phone (Viber, WhatsApp).
1. Stingl automatic circular saw (multilama):
- Cutting height 240mm
- cutting width 740mm (passing 900mm or more)
- Main motors 2 x 110 kw
- automatic advance
- 4 cutting groups with hydraulic drive, variable (shaft in ax)
- Longitudinal evacuation and transfer
- automatic cut to the desired length
- waste separator
- Complete, modern electric panel
2. Stingl automatic circular edging:
- Cutting height 100mm
- Cutting width 700mm
- 75kw engine
- automatic feed with singularization, automatic centering, speed 230m / min
- automatic (mechanical) sorting on 8-12 lengths
- Complete, modern electric panel
Both circulars are fully automatic and can work without operator, or single for both!
The machines are in Germany, undismantled, in excellent working condition.
The machinery can also be sold separately.
- Cutting height 240mm
- cutting width 740mm (passing 900mm or more)
- Main motors 2 x 110 kw
- automatic advance
- 4 cutting groups with hydraulic drive, variable (shaft in ax)
- Longitudinal evacuation and transfer
- automatic cut to the desired length
- waste separator
- Complete, modern electric panel
2. Stingl automatic circular edging:
- Cutting height 100mm
- Cutting width 700mm
- 75kw engine
- automatic feed with singularization, automatic centering, speed 230m / min
- automatic (mechanical) sorting on 8-12 lengths
- Complete, modern electric panel
Both circulars are fully automatic and can work without operator, or single for both!
The machines are in Germany, undismantled, in excellent working condition.
The machinery can also be sold separately.
We sell 950 KW boiler, Mawera, in an excellent condition, complete installation:
- available capacity: 950KW
- burning material: sawdust, chips, bark
- Hydraulic feed, automatic from bunker
- Forced firing in suspension
- complete electric panel, PLC control, Lambda probe, fans on each smoke path with frequency converters.
- hydraulic group
- automatic ash extractor
- distributor + pump
- safety valves
- 16m smoke
- Various spare parts
Provides foundation plans, electrical schemes, installation assistance.
Price: 35.000 euros
- available capacity: 950KW
- burning material: sawdust, chips, bark
- Hydraulic feed, automatic from bunker
- Forced firing in suspension
- complete electric panel, PLC control, Lambda probe, fans on each smoke path with frequency converters.
- hydraulic group
- automatic ash extractor
- distributor + pump
- safety valves
- 16m smoke
- Various spare parts
Provides foundation plans, electrical schemes, installation assistance.
Price: 35.000 euros
We have offer of pine post treated with cca for electrical lines in all measures-
we can supply pine wood for pallets production made in Poland,
we have attractive prices and can offer you EXW , FOB or CIF .
payment terms L/C or T/T
so please contact us for more details
we have attractive prices and can offer you EXW , FOB or CIF .
payment terms L/C or T/T
so please contact us for more details
LINEAR MOULDER MACHINE BRAND WEINIG MOD. PROFIMAT 23 FORTEC
WORKING WIDTH mm: 230
THICKNESS mm: 120
HEADS : 6
Ax down: 2
Ax right: 1
Ax left: 1
Ax superior: 2
Configuratia axelor: i-d-x-s-s-i
Viteza de rotatie a axelor g / min: 6,000 rpm
Diametrul axului mm: 40
Posibilitatea de prelucrare bete rotunde: Da, diametre diferite
Lungimea piesei care incape pe masa: 2,000 mm
Pompa de ungere: manuala
Presare automata: Da
Viteza de lucru: max m / min: 24
Actionarea rolelor: cardan
DOUBLE FORMATED CIRCULAR FIREPLACE TI2500
, MANUFACTURING 2005
, PANZA CROSSED AT 45 GRADE
, DIM CARRU 400X3200MM
, FORMATION CAPACITY 3370X300MM
, WIDTH DIAMETER 450MM
, CLAMP INCLINATION 0-45 GRADE
, HEADING 155MM
, CUTTING HEIGHT TO 45MG 115MM
, THREADING LAMPS AND PARALLEL 1250MM GUIDE
, WOOD TURNING 3200/4000/6000 ROT / MIN
, POWER OF 7,5 HP (5,5Kw)
, WEIGHT 1000 kg
The machine is equipped with aluminum frame, anodized profile car, external adjustable cutter, mechanical blade lifting device, blade inclination viewer, parallelogram blade protection, self-riding electrical norm, parallel cutter bar, press bar 3200mm, the second formatting machine.
, MANUFACTURING 2005
, PANZA CROSSED AT 45 GRADE
, DIM CARRU 400X3200MM
, FORMATION CAPACITY 3370X300MM
, WIDTH DIAMETER 450MM
, CLAMP INCLINATION 0-45 GRADE
, HEADING 155MM
, CUTTING HEIGHT TO 45MG 115MM
, THREADING LAMPS AND PARALLEL 1250MM GUIDE
, WOOD TURNING 3200/4000/6000 ROT / MIN
, POWER OF 7,5 HP (5,5Kw)
, WEIGHT 1000 kg
The machine is equipped with aluminum frame, anodized profile car, external adjustable cutter, mechanical blade lifting device, blade inclination viewer, parallelogram blade protection, self-riding electrical norm, parallel cutter bar, press bar 3200mm, the second formatting machine.
CALIBRATION AND DELAYED MACHINE WITH TWO WASHERS EMC EXPLORER TYPE 1100-2RR
, MANUFACTURING 2005
, UTILITY WORKER 1100MM
, WORKING GROWTH MIN 3MM - MAX 170MM
, DIM BENZI ABRAZIVE 1120X1900MM
, GREUTATE MACHINE 1360KG
, THE FIRST UNIT FOR CALIBRATION HAS DIAMETER OF STEEL ROLL 175MM AND POWER ENGINE 18.5 KW
, 18M / S SCREW SPEED
, THE TWO UNITS OF SLEEPING HAVE THE 250MM RUBBER ROLE DIAMETER AND 11KW ENGINE
, DURITATE 85 SHORE
, TWO WAYS OF ASPIRATION
, INSTALLED POWER 32 KW
, AUTOMATIC ADVANCED BETWEEN 5 / 17M / MIN 1.1KW MOTOR
, ANALOGUE AMPLIFIERS FOR THE MAIN MOTORS
, LIFTING / CUTTING MOTOR 0,75KW MOTOR
, MOTORIZED MOTORIZED MACHINE WITH COMPLETE ELECTRIC CONTROL
, DISPLAY DIGITAL PTR GROWTH
, ABRAZIVE BANDS WITH PHOTO-CONTROLLED OSCILATIONS
, PRESS ROLLS BETWEEN 45-50 SHORES DURIVES
, AUTOMATIC STOPPING IN AN EMERGENCY: REMOVING THE LEVEL-OUTLET STEEL-AIR FREQUENCY-SIDE BENZING
, NATURAL COVER WITH 55 SHORES DURATION
, AUTOMATIC FRAMES PER EACH MOTOR
, BATTERY PROTECTION BAR
, SPECIAL PROTECTION FOR SMALL PARTS
, SUPPLEMENTARY MASS WITH THE SECOND ROLE ON THE MACHINE INTO AND OUT
, TWO WIDTH OF 150MM DIAMETER
, FOUR SEPTEMPLE DIMENSIONS WITH 70MM DIAMETER FOR DESTRUCTORS
, SPEED SPEED M / SEC 25
, PRESSURE NECESSARY 6 BARS
, CONSUMER AIR 15LITRI / MIN
, AIR DRIVER CONSUMPTION 640 L / MIN
, ELECTRICAL CONNECTION 400W / 50HZ
, MACHINE VERIFICATION ALARM
, AUTO STAR / TRIUNGHI STARTING
, OSCILANTS BROWNERS ABSTRACT 1 AND 2
, MOTOVARIATOR PTR AVANS
, MANUFACTURING 2005
, UTILITY WORKER 1100MM
, WORKING GROWTH MIN 3MM - MAX 170MM
, DIM BENZI ABRAZIVE 1120X1900MM
, GREUTATE MACHINE 1360KG
, THE FIRST UNIT FOR CALIBRATION HAS DIAMETER OF STEEL ROLL 175MM AND POWER ENGINE 18.5 KW
, 18M / S SCREW SPEED
, THE TWO UNITS OF SLEEPING HAVE THE 250MM RUBBER ROLE DIAMETER AND 11KW ENGINE
, DURITATE 85 SHORE
, TWO WAYS OF ASPIRATION
, INSTALLED POWER 32 KW
, AUTOMATIC ADVANCED BETWEEN 5 / 17M / MIN 1.1KW MOTOR
, ANALOGUE AMPLIFIERS FOR THE MAIN MOTORS
, LIFTING / CUTTING MOTOR 0,75KW MOTOR
, MOTORIZED MOTORIZED MACHINE WITH COMPLETE ELECTRIC CONTROL
, DISPLAY DIGITAL PTR GROWTH
, ABRAZIVE BANDS WITH PHOTO-CONTROLLED OSCILATIONS
, PRESS ROLLS BETWEEN 45-50 SHORES DURIVES
, AUTOMATIC STOPPING IN AN EMERGENCY: REMOVING THE LEVEL-OUTLET STEEL-AIR FREQUENCY-SIDE BENZING
, NATURAL COVER WITH 55 SHORES DURATION
, AUTOMATIC FRAMES PER EACH MOTOR
, BATTERY PROTECTION BAR
, SPECIAL PROTECTION FOR SMALL PARTS
, SUPPLEMENTARY MASS WITH THE SECOND ROLE ON THE MACHINE INTO AND OUT
, TWO WIDTH OF 150MM DIAMETER
, FOUR SEPTEMPLE DIMENSIONS WITH 70MM DIAMETER FOR DESTRUCTORS
, SPEED SPEED M / SEC 25
, PRESSURE NECESSARY 6 BARS
, CONSUMER AIR 15LITRI / MIN
, AIR DRIVER CONSUMPTION 640 L / MIN
, ELECTRICAL CONNECTION 400W / 50HZ
, MACHINE VERIFICATION ALARM
, AUTO STAR / TRIUNGHI STARTING
, OSCILANTS BROWNERS ABSTRACT 1 AND 2
, MOTOVARIATOR PTR AVANS
The Automatic Cutting and Clearing Machine with Opticut 200 Elite Cutting Optimization consists of:
-the marking position
-the measuring station
transverse supply
-control panel
-the cutting position
-the command desk
-the sorting with evacuation
-automatization complete
The Opticut 200 Elite automatic cutting and defect-cutting machine is designed for large industrial capacities, guaranteeing a high degree of precision and good optimization of the material introduced into the machine.
Processing dimensions:
Diameter of circular blade 600mm
Tape speed 3900 rpm.
Bore 35 mm
Input lengths min / max 400-6500mm
Input width min / max 30-260mm
Inputs min / max 10-100mm
Fixed lengths after slicing
-from waste disposal at the end of the 120mm band
-from 120mm blowing waste
Section sections - nominal values
-max 200x60mm
-max 250x14mm
-max 170x70mm
-max 140x12mm
Bend curves max 8mm / ml
Tolerance at sectioning / cutting +/- 0.5-1.2mm
Tolerance to thickness +/- 2mm
Wood species: softwood / hardwood
Measuring
The measuring unit is equipped with a fluorescence camera for marking and measuring of defects. The length measurement is made with measuring wheels independent of the drive system, so there are no errors in measurement.
The newsletter
Adjustment is mechanical on the height of the upper press rollers.
Evacuation and sorting
- waste disposal via integrated blowing device
- Exhaust conveyor belt and sorting station
-powered piston discharge
- 250mm band width
-band length 7.5m
Capacity of the facility
Continuously adjustable feed rate max. 190m / min
Cutting time, braking 0.7-1.2 sec
Circular motor power 7.5kw
Engine power 9,0kw
Max. Feed speed 240 mt / min
Rotation speed 3000 rpm
Diameter of suction mouth 200mm
The diameter of the feed roller inf. 80mm
Upper roller diameter 110 mm
Number of feed rollers 11
Food / marking
Marking and feeding station with side buffers for 2 markers, with drive, length 5m for maximum length of 6,5m
Electronic command
The machine`s electronic command allows the operator the following operation:
-Sales the technical data for a minimum of 800 groups produced
-Production capability with printing capability
- linear measurement of the produced material
-graphic plotting of the cutting sequences
-time working hours
Spect.Technica-monitor 17 in color with touchscreen operation
-command unit
Electrical / fittings / accessories
Working voltage 400V / 50 Hz
If the power supply is unstable, the machine will save the data.
Electric connection 20kw
Air consumption 1300LN / min
Exhaust speed 40m / sec
Color gray, blue and black
Phosphorescent chalk
-the marking position
-the measuring station
transverse supply
-control panel
-the cutting position
-the command desk
-the sorting with evacuation
-automatization complete
The Opticut 200 Elite automatic cutting and defect-cutting machine is designed for large industrial capacities, guaranteeing a high degree of precision and good optimization of the material introduced into the machine.
Processing dimensions:
Diameter of circular blade 600mm
Tape speed 3900 rpm.
Bore 35 mm
Input lengths min / max 400-6500mm
Input width min / max 30-260mm
Inputs min / max 10-100mm
Fixed lengths after slicing
-from waste disposal at the end of the 120mm band
-from 120mm blowing waste
Section sections - nominal values
-max 200x60mm
-max 250x14mm
-max 170x70mm
-max 140x12mm
Bend curves max 8mm / ml
Tolerance at sectioning / cutting +/- 0.5-1.2mm
Tolerance to thickness +/- 2mm
Wood species: softwood / hardwood
Measuring
The measuring unit is equipped with a fluorescence camera for marking and measuring of defects. The length measurement is made with measuring wheels independent of the drive system, so there are no errors in measurement.
The newsletter
Adjustment is mechanical on the height of the upper press rollers.
Evacuation and sorting
- waste disposal via integrated blowing device
- Exhaust conveyor belt and sorting station
-powered piston discharge
- 250mm band width
-band length 7.5m
Capacity of the facility
Continuously adjustable feed rate max. 190m / min
Cutting time, braking 0.7-1.2 sec
Circular motor power 7.5kw
Engine power 9,0kw
Max. Feed speed 240 mt / min
Rotation speed 3000 rpm
Diameter of suction mouth 200mm
The diameter of the feed roller inf. 80mm
Upper roller diameter 110 mm
Number of feed rollers 11
Food / marking
Marking and feeding station with side buffers for 2 markers, with drive, length 5m for maximum length of 6,5m
Electronic command
The machine`s electronic command allows the operator the following operation:
-Sales the technical data for a minimum of 800 groups produced
-Production capability with printing capability
- linear measurement of the produced material
-graphic plotting of the cutting sequences
-time working hours
Spect.Technica-monitor 17 in color with touchscreen operation
-command unit
Electrical / fittings / accessories
Working voltage 400V / 50 Hz
If the power supply is unstable, the machine will save the data.
Electric connection 20kw
Air consumption 1300LN / min
Exhaust speed 40m / sec
Color gray, blue and black
Phosphorescent chalk
Can offer you ashwood logs dia from 24 - 70 cm,
length 2 - 6 m, Quality A, B , C
quantity: truck base
length 2 - 6 m, Quality A, B , C
quantity: truck base
We produce charcoal from the Pini & Kay briquette (Pini-kay) with high physico-chemical performance by special technology.
Advantages of briquetted charcoal:
" do not spark when burning;
" they are not crushed during transportation;
" Charcoal briquettes do not dust;
" Qualitative indicators are not inferior to the original raw materials;
" By the time of burning and calorific value;
" Exceed charcoal at times.
We are a company engaged in the production and export of briquettes and pellets. We are looking for partners to sell our products, charcoal briquette. In turn, we offer favorable conditions for work, and a proper approach to business management. Packaging possible in boxes with your logo or clear. We have experience working with a European buyer, sales, production and logistics. Welcome long-term cooperation. You can contact with me by mail or phone (Viber, WhatsApp)
Advantages of briquetted charcoal:
" do not spark when burning;
" they are not crushed during transportation;
" Charcoal briquettes do not dust;
" Qualitative indicators are not inferior to the original raw materials;
" By the time of burning and calorific value;
" Exceed charcoal at times.
We are a company engaged in the production and export of briquettes and pellets. We are looking for partners to sell our products, charcoal briquette. In turn, we offer favorable conditions for work, and a proper approach to business management. Packaging possible in boxes with your logo or clear. We have experience working with a European buyer, sales, production and logistics. Welcome long-term cooperation. You can contact with me by mail or phone (Viber, WhatsApp)