Procurement of hardwood firewood (beech, oak, hornbeam, etc.).
The firewood must meet the following specifications:
- hardwood species: beech, hornbeam, oak, etc.;
- must be dry;
- must have a length of 1 linear meter;
- must have a diameter/thickness between 15 cm and 40 cm;
- must be free of knots.
The firewood must meet the following specifications:
- hardwood species: beech, hornbeam, oak, etc.;
- must be dry;
- must have a length of 1 linear meter;
- must have a diameter/thickness between 15 cm and 40 cm;
- must be free of knots.
We are purchasing firewood with the following specifications:
a) Wood category:
- Hardwood (beech, oak, hornbeam), with no admixture of softwoods or coniferous species.
b) Cutting dimensions:
- Length: 1 m, 50 cm, or 35 cm (± 5 cm), depending on the requirements of the receiving unit;
- Diameter: min. 5 cm – max. 30 cm (face width).
c) Processing/Preparation:
- The wood shall be sourced from trees felled at any time of the year; it may retain its bark or be partially or fully debarked, as resulting from logging operations;
- For wood prepared and measured in steres (stacked cubic meters), knots must be trimmed flush with the surface of the wood. The ends of the firewood pieces must be saw-cut, with the exception of natural breakages or the end originally attached to the stump;
- Firewood pieces with a thickness of 16 to 30 cm must be split into four.
d) Moisture content:
- To meet this requirement, the firewood subject to these specifications must be well-seasoned (trees must be felled at least one year prior to the delivery date).
- The maximum permitted moisture content is 25%.
e) Defects:
- Firewood of any category shall not exhibit the following defects: cubical rot or fibrous rot, in accordance with the conditions stipulated in Art. 2.3 of the STAS 2340/1980 standard. - wood that is scorched or over-matured—a condition resulting from it having been left on the ground for an extended period after felling, exposed to moisture and heat—is not accepted.
a) Wood category:
- Hardwood (beech, oak, hornbeam), with no admixture of softwoods or coniferous species.
b) Cutting dimensions:
- Length: 1 m, 50 cm, or 35 cm (± 5 cm), depending on the requirements of the receiving unit;
- Diameter: min. 5 cm – max. 30 cm (face width).
c) Processing/Preparation:
- The wood shall be sourced from trees felled at any time of the year; it may retain its bark or be partially or fully debarked, as resulting from logging operations;
- For wood prepared and measured in steres (stacked cubic meters), knots must be trimmed flush with the surface of the wood. The ends of the firewood pieces must be saw-cut, with the exception of natural breakages or the end originally attached to the stump;
- Firewood pieces with a thickness of 16 to 30 cm must be split into four.
d) Moisture content:
- To meet this requirement, the firewood subject to these specifications must be well-seasoned (trees must be felled at least one year prior to the delivery date).
- The maximum permitted moisture content is 25%.
e) Defects:
- Firewood of any category shall not exhibit the following defects: cubical rot or fibrous rot, in accordance with the conditions stipulated in Art. 2.3 of the STAS 2340/1980 standard. - wood that is scorched or over-matured—a condition resulting from it having been left on the ground for an extended period after felling, exposed to moisture and heat—is not accepted.
We intend to purchase hardwood firewood with the following dimensions: length greater than 1 m, and thickness between 12 and 30 cm.
FIREWOOD (hardwood – oak, hornbeam, ash, acacia, etc., intended for use as fuel) – 16.6 tonnes.
MINIMUM QUALITY REQUIREMENTS:
- dry logs with high calorific value (rot or green wood are not permitted).
MINIMUM QUALITY REQUIREMENTS:
- dry logs with high calorific value (rot or green wood are not permitted).
Supply of hardwood firewood - beech, hornbeam, or oak - cut into 30-35 cm lengths and split. The wood must be free of rot, with a diameter greater than 10 cm at the thinner end. Loading, transport, and unloading are to be carried out by the supplier and are included in the quoted price.
The project consists of the design and construction of a main pavilion of 250 m² (2,690 square feet), executed using high-density tropical hardwood as the primary structural material. The structure is meticulously assembled using traditional Japanese carpentry techniques, ensuring excellent mechanical strength, high durability, and optimal performance under adverse environmental conditions, particularly in marine environments with high salinity and humidity.
The roof is constructed with alang-alang, a traditional Balinese material known for its excellent thermal performance and high-quality natural aesthetic, contributing to environmental comfort and seamless integration with the surrounding landscape.
The complex is complemented by smaller auxiliary pavilions, designed and built following the same structural, constructive, and aesthetic principles, ensuring formal and technical coherence throughout the entire development.
All structures were manufactured and assembled at our facilities on the island of Bali. The construction system was conceived according to modular prefabrication principles, allowing for subsequent disassembly, containerized packaging, and maritime transport for final installation on the island of Ibiza. This approach optimizes logistics, ensures high precision during assembly, and enables a fast, efficient, and low-complexity on-site construction process, significantly reducing construction timelines and enhancing the overall sustainability of the project.
Project developed for the Yemanjá Restaurant Pavilion, designed for installation on Cala Jondal beach, on the island of Ibiza, commissioned by Blue Marlin Ibiza.
Regarding our production and manufacturing model, we work exclusively on a made-to-order basis, developing each project to measure and by commission, with a process that is entirely visible to the client. We operate through production contracts that ensure clarity, traceability, and compliance at every stage. We offer a comprehensive service that encompasses product design, construction, and customized manufacturing, always starting from the idea or concept presented by the client. Our goal is to transform each proposal into a unique piece, crafted with high-quality standards and meticulous attention to detail.
The roof is constructed with alang-alang, a traditional Balinese material known for its excellent thermal performance and high-quality natural aesthetic, contributing to environmental comfort and seamless integration with the surrounding landscape.
The complex is complemented by smaller auxiliary pavilions, designed and built following the same structural, constructive, and aesthetic principles, ensuring formal and technical coherence throughout the entire development.
All structures were manufactured and assembled at our facilities on the island of Bali. The construction system was conceived according to modular prefabrication principles, allowing for subsequent disassembly, containerized packaging, and maritime transport for final installation on the island of Ibiza. This approach optimizes logistics, ensures high precision during assembly, and enables a fast, efficient, and low-complexity on-site construction process, significantly reducing construction timelines and enhancing the overall sustainability of the project.
Project developed for the Yemanjá Restaurant Pavilion, designed for installation on Cala Jondal beach, on the island of Ibiza, commissioned by Blue Marlin Ibiza.
Regarding our production and manufacturing model, we work exclusively on a made-to-order basis, developing each project to measure and by commission, with a process that is entirely visible to the client. We operate through production contracts that ensure clarity, traceability, and compliance at every stage. We offer a comprehensive service that encompasses product design, construction, and customized manufacturing, always starting from the idea or concept presented by the client. Our goal is to transform each proposal into a unique piece, crafted with high-quality standards and meticulous attention to detail.
Hardwood firewood for sale:
- oak logs: 400 m³
- hornbeam logs: 400 m³
- linden logs: 350 m³.
- oak logs: 400 m³
- hornbeam logs: 400 m³
- linden logs: 350 m³.
Hello,
We represent a company based in Olt County that produces wood pellets.
We are interested in purchasing approximately 100 tons of sawdust per month, with the aim of establishing a long-term commercial partnership.
Please provide us with a price quote that includes:
- Price per ton (with and without VAT);
- Wood species (softwood, hardwood, or a mix);
- Monthly available quantity;
- Availability of transport to the village of Bacea, in the commune of Movileni, Olt County;
- Payment and delivery terms.
We are looking for a stable partnership, involving monthly purchases and the potential to increase quantities in the future.
Thank you in advance; we look forward to receiving your offer.
Best regards.
We represent a company based in Olt County that produces wood pellets.
We are interested in purchasing approximately 100 tons of sawdust per month, with the aim of establishing a long-term commercial partnership.
Please provide us with a price quote that includes:
- Price per ton (with and without VAT);
- Wood species (softwood, hardwood, or a mix);
- Monthly available quantity;
- Availability of transport to the village of Bacea, in the commune of Movileni, Olt County;
- Payment and delivery terms.
We are looking for a stable partnership, involving monthly purchases and the potential to increase quantities in the future.
Thank you in advance; we look forward to receiving your offer.
Best regards.
Technical Quality Requirements:
- The firewood to be delivered shall comply with the provisions of STAS 2340/1980 (Category A: processed hardwood—oak, beech, hornbeam—stacked in steres). Category A includes processed hardwood stacked in steres, containing no more than 10% softwood or coniferous wood.
Regarding STAS 2340/1980, the following specifications apply:
- Processed wood stacked in steres, cut to a length of 1 m ± 5 cm, with a diameter of 15–30 cm at the thin end;
- Split wood (billets/segments): maximum face width of 30 cm;
- Wood showing signs of rot is not accepted;
- The moisture content of the wood must be sufficiently low to meet the requirements stipulated in Article 2.4.1, paragraph 2, point 1 of STAS 2340/1980.
The total quantity to be procured is: 220 steres (equivalent to 110 tonnes) and 20 steres (equivalent to 10 tonnes).
- The firewood to be delivered shall comply with the provisions of STAS 2340/1980 (Category A: processed hardwood—oak, beech, hornbeam—stacked in steres). Category A includes processed hardwood stacked in steres, containing no more than 10% softwood or coniferous wood.
Regarding STAS 2340/1980, the following specifications apply:
- Processed wood stacked in steres, cut to a length of 1 m ± 5 cm, with a diameter of 15–30 cm at the thin end;
- Split wood (billets/segments): maximum face width of 30 cm;
- Wood showing signs of rot is not accepted;
- The moisture content of the wood must be sufficiently low to meet the requirements stipulated in Article 2.4.1, paragraph 2, point 1 of STAS 2340/1980.
The total quantity to be procured is: 220 steres (equivalent to 110 tonnes) and 20 steres (equivalent to 10 tonnes).
The wood fuel pellets shall be manufactured from softwood and/or hardwood sawdust; they are ideal for automatic, metered feeding, with adjustable flame and temperature settings to ensure consistent and convenient operation of the heating system. The pellets are produced by compressing sawdust into granules.
The pellets shall be packed in 15 kg bags, labeled with the product name and specifications, and shrink-wrapped on pallets containing 66 bags (990 kg).
Technical specifications:
- Diameter: 6 +/- 1 mm
- Length: 3.15 L ≤ 40 mm
- Moisture content: ≤ 10%
- Mechanical durability: ≥ 98.0
- Fines (fine particles): ≤ 1.0
- Pellet temperature: ≤ 40°C
- Mechanical hardness: ≥ 98.0
- Net calorific value: ≥ 4.6 kW/kg
- Bulk density: 600 ≤ BD ≤ 750 kg/m³
- Additives: ≤ 2
- Nitrogen: ≤ 0.3
- Sulfur: ≤ 0.04
- Chlorine: ≤ 0.02
- Ash deformation temperature: ≥ 1200°C
The wood fuel briquettes shall be made from sawdust or wood chips, packed in shrink-wrap film in 5 kg or 10 kg bundles, labeled with the product name and specifications, and supplied on 1-tonne pallets. Technical specification:
- Cylindrical shape: diameter between 5.5 – 9 cm – length 400 mm
- Rectangular (parallelepiped) shape: RUF type – dimensions 150 x 60 x 90 mm
- Moisture content: ≤ 12%
- Ash content: ≤ 1.0%
- Fines (fine particles): ≤ 1.0 g/cm³
- Briquette temperature: ≤ 40°C
- Mechanical durability: ≥ 95.0
- Net calorific value: ≥ 4.3 kWh/kg – ≥ 15.5 MJ/kg
- Additives: ≤ 2%
- Nitrogen: ≤ 0.3%
- Sulfur: ≤ 0.04%
- Chlorine: ≤ 0.02%
- Pressed at a pressure of: 250 – 280 bar/cm³.
The pellets shall be packed in 15 kg bags, labeled with the product name and specifications, and shrink-wrapped on pallets containing 66 bags (990 kg).
Technical specifications:
- Diameter: 6 +/- 1 mm
- Length: 3.15 L ≤ 40 mm
- Moisture content: ≤ 10%
- Mechanical durability: ≥ 98.0
- Fines (fine particles): ≤ 1.0
- Pellet temperature: ≤ 40°C
- Mechanical hardness: ≥ 98.0
- Net calorific value: ≥ 4.6 kW/kg
- Bulk density: 600 ≤ BD ≤ 750 kg/m³
- Additives: ≤ 2
- Nitrogen: ≤ 0.3
- Sulfur: ≤ 0.04
- Chlorine: ≤ 0.02
- Ash deformation temperature: ≥ 1200°C
The wood fuel briquettes shall be made from sawdust or wood chips, packed in shrink-wrap film in 5 kg or 10 kg bundles, labeled with the product name and specifications, and supplied on 1-tonne pallets. Technical specification:
- Cylindrical shape: diameter between 5.5 – 9 cm – length 400 mm
- Rectangular (parallelepiped) shape: RUF type – dimensions 150 x 60 x 90 mm
- Moisture content: ≤ 12%
- Ash content: ≤ 1.0%
- Fines (fine particles): ≤ 1.0 g/cm³
- Briquette temperature: ≤ 40°C
- Mechanical durability: ≥ 95.0
- Net calorific value: ≥ 4.3 kWh/kg – ≥ 15.5 MJ/kg
- Additives: ≤ 2%
- Nitrogen: ≤ 0.3%
- Sulfur: ≤ 0.04%
- Chlorine: ≤ 0.02%
- Pressed at a pressure of: 250 – 280 bar/cm³.
Hello! We would like to purchase hardwood firewood. Please contact us for details. Have a great day!