The firewood to be delivered shall comply with the provisions of STAS 2340/1980 (Category A: processed hardwood—beech, oak—stacked on pallets, in bags, or loose). Category A comprises processed hardwood (beech, oak) stacked in steres, excluding softwood or coniferous wood.
Specifications:
- the supplied firewood shall be transported and unloaded at each location; it shall be cut by the supplier to lengths between 25 and 30 cm and have diameters ranging from 0.16 m to 0.30 m;
- the firewood must be palletized (packaged) or loose, in accordance with applicable legislation;
- the firewood shall be split (into billets) with a maximum face width of 15 cm to allow insertion through the stove`s firebox door (255x275 mm).
The firewood must not exhibit the following defects:
- cuboidal rot;
- fibrous rot, subject to the conditions specified in Art. 2.3 of STAS 2340/1980 (Category A – processed hardwood stacked in steres on pallets). This standard applies to wood from various hardwood species—derived from forestry operations and the trimming of log overlengths—intended for use as solid fuel (firewood).
Category A comprises processed hardwood (beech, oak) stacked in steres, excluding softwood or coniferous wood.
Estimated value: 248,897 RON.
Specifications:
- the supplied firewood shall be transported and unloaded at each location; it shall be cut by the supplier to lengths between 25 and 30 cm and have diameters ranging from 0.16 m to 0.30 m;
- the firewood must be palletized (packaged) or loose, in accordance with applicable legislation;
- the firewood shall be split (into billets) with a maximum face width of 15 cm to allow insertion through the stove`s firebox door (255x275 mm).
The firewood must not exhibit the following defects:
- cuboidal rot;
- fibrous rot, subject to the conditions specified in Art. 2.3 of STAS 2340/1980 (Category A – processed hardwood stacked in steres on pallets). This standard applies to wood from various hardwood species—derived from forestry operations and the trimming of log overlengths—intended for use as solid fuel (firewood).
Category A comprises processed hardwood (beech, oak) stacked in steres, excluding softwood or coniferous wood.
Estimated value: 248,897 RON.
I will buy hardwood pellets (beech, oak) only with a certificate.
26-ton truck, I am interested in the price including transport.
26-ton truck, I am interested in the price including transport.
Solid fuel for local heating - hardwood firewood - quantity 20,000 kg.
The wood material must meet the following requirements:
- minimum diameter: 15 cm
- maximum diameter: 25 cm
- minimum length: 40 cm
- maximum length: 50 cm
- maximum humidity: 30%.
Species (with priority): beech, oak, hornbeam, alder, spruce or other deciduous species with appropriate calorific value.
The wood material must meet the following requirements:
- minimum diameter: 15 cm
- maximum diameter: 25 cm
- minimum length: 40 cm
- maximum length: 50 cm
- maximum humidity: 30%.
Species (with priority): beech, oak, hornbeam, alder, spruce or other deciduous species with appropriate calorific value.
Firewood must comply with the standards and regulations in force and meet the following conditions:
• 1 meter long;
• split or round;
• hardwood: acacia, oak, beech, hornbeam or elm;
• humidity between 10% and 20%;
• free of rot or other defects that affect quality;
• cut to a length of 1 m and stacked for measurement at a height of 2 m.
• 1 meter long;
• split or round;
• hardwood: acacia, oak, beech, hornbeam or elm;
• humidity between 10% and 20%;
• free of rot or other defects that affect quality;
• cut to a length of 1 m and stacked for measurement at a height of 2 m.
Specification:
- the types of hardwood accepted will be: beech, oak, hornbeam, etc.
- the firewood will be cut into logs with dimensions between 25-40 cm long
- the firewood will have a maximum humidity of 30% (open-air dried wood has a humidity of 12-15%) and a maximum allowed rot of 20%.
- the types of hardwood accepted will be: beech, oak, hornbeam, etc.
- the firewood will be cut into logs with dimensions between 25-40 cm long
- the firewood will have a maximum humidity of 30% (open-air dried wood has a humidity of 12-15%) and a maximum allowed rot of 20%.
Hardwood firewood supply. Details on request.
Firewood purchase - hardwood: beech, acacia, ash, maple, elm, hornbeam, oak.
The delivered firewood will be cut to a size between 30 cm and a maximum of 45 cm for terracotta stoves.
The delivered firewood will be cut to a size between 30 cm and a maximum of 45 cm for terracotta stoves.
Technical characteristics and delivery conditions:
- Firewood will be of quality I, category A, from hardwood species, namely: beech, oak, hornbeam, ash and maple, dried, without admixture of softwood or resinous species.
- Degraded products are not accepted. The wood must be healthy and not show traces of rot with a cubic structure or fibrous rot.
- Branches, tree bark and other inappropriate materials are not accepted.
- The products offered and delivered will comply with the technical requirements provided in STAS 2340-80, to the extent that its provisions are applicable to the requested products.
- The wood will be delivered with a length between 25 and 50 cm, depending on the needs communicated in the orders sent by the purchaser, and will be cracked, so that they can be inserted into the heating plants.
- Firewood will be of quality I, category A, from hardwood species, namely: beech, oak, hornbeam, ash and maple, dried, without admixture of softwood or resinous species.
- Degraded products are not accepted. The wood must be healthy and not show traces of rot with a cubic structure or fibrous rot.
- Branches, tree bark and other inappropriate materials are not accepted.
- The products offered and delivered will comply with the technical requirements provided in STAS 2340-80, to the extent that its provisions are applicable to the requested products.
- The wood will be delivered with a length between 25 and 50 cm, depending on the needs communicated in the orders sent by the purchaser, and will be cracked, so that they can be inserted into the heating plants.
Hardwood firewood (beech, oak, hornbeam) shaped - 40,400 kg.
Length: max. 25 cm.
Thickness (with bark): max. l5 cm on the cut surface.
ANOMALIES Sl DEFECTS. Firewood of all categories may have all anomalies and defects, except for crumbly and fibrous rot.
SHAPING. Shaped firewood must have stumps cut to the face of the wood and a maximum thickness of 25 cm. Logs with a thickness greater than 15 cm will be split so that the shaped wood does not exceed 15 cm at the thick end.
QUALITY. The product must comply with all norms, standards, orders or other regulations specific to them, the economic operator being obliged to present quality and conformity certificates.
The physical, chemical and bacteriological properties are guaranteed by the supplier through its own control and are verified in the event of a dispute at the request of the beneficiary and at the supplier`s expense.
Length: max. 25 cm.
Thickness (with bark): max. l5 cm on the cut surface.
ANOMALIES Sl DEFECTS. Firewood of all categories may have all anomalies and defects, except for crumbly and fibrous rot.
SHAPING. Shaped firewood must have stumps cut to the face of the wood and a maximum thickness of 25 cm. Logs with a thickness greater than 15 cm will be split so that the shaped wood does not exceed 15 cm at the thick end.
QUALITY. The product must comply with all norms, standards, orders or other regulations specific to them, the economic operator being obliged to present quality and conformity certificates.
The physical, chemical and bacteriological properties are guaranteed by the supplier through its own control and are verified in the event of a dispute at the request of the beneficiary and at the supplier`s expense.
Wood pellets are a high-efficiency, eco-friendly biomass fuel made from compressed sawdust and wood shavings. They are a clean-burning, renewable energy source widely used for heating in residential, commercial, and industrial applications. These pellets are cylindrical in shape, uniform in size, and offer consistent performance in modern pellet stoves, boilers, and furnaces. Their low moisture content ensures high combustion efficiency, making them an ideal alternative to traditional fossil fuels.
Wood pellets are also easy to handle, store, and transport, with minimal ash residue after burning. They contribute significantly to reducing greenhouse gas emissions and help in maintaining a sustainable energy cycle.
Specifications:
Diameter: 6mm or 8mm
Length: 10mm to 40mm
Moisture Content: ≤10
Ash Content: ≤1.5
Calorific Value: ≥4,600 Kcal/kg
Bulk Density: ≥600 kg/m³
Material: 100 natural wood (hardwood/softwood blend)
Additives: None – pure compressed biomass
Packing Options: 15kg bags, jumbo bags, or as required
Usage: Home heating, industrial boilers, biomass power plants
These pellets are designed to deliver reliable and efficient heating performance while promoting environmental sustainability.
Wood pellets are also easy to handle, store, and transport, with minimal ash residue after burning. They contribute significantly to reducing greenhouse gas emissions and help in maintaining a sustainable energy cycle.
Specifications:
Diameter: 6mm or 8mm
Length: 10mm to 40mm
Moisture Content: ≤10
Ash Content: ≤1.5
Calorific Value: ≥4,600 Kcal/kg
Bulk Density: ≥600 kg/m³
Material: 100 natural wood (hardwood/softwood blend)
Additives: None – pure compressed biomass
Packing Options: 15kg bags, jumbo bags, or as required
Usage: Home heating, industrial boilers, biomass power plants
These pellets are designed to deliver reliable and efficient heating performance while promoting environmental sustainability.
STANDARDS AND REGULATIONS:
STAS 2340-80 (category A - shaped wood laid in stacks and doubles - hardwood hardwood stacks).
This standard refers to wood of any species resulting from forestry operations and from cutting off the excess lengths of logs, intended for fuel, called firewood.
Firewood is divided as follows:
- category A includes shaped wood laid in stacks and doubles - hardwood hardwood stacks, with a maximum of 10% softwood or softwood wood;
- hardwood hardwood stacks, with a maximum of 10% wood with a thickness of 5 cm at the thin end, split (lobed): max. 30 cm face width.
TECHNICAL REQUIREMENTS:
- Firewood must be cut to 30 cm in length and split/cracked to a maximum thickness of 20 cm. It must also be placed on pallets so that it can be measured upon delivery.
ANOMALIES AND DEFECTS:
- Firewood of all categories may have all anomalies and defects, except for brittle and fibrous rot.
SHAPING:
- Firewood may remain with the bark, partially or completely peeled, as resulting from exploitation.
- Firewood shaped into steri and double-steri must have the stumps cut to the face of the wood.
- The ends of the firewood must be sawn off, except for breaks and the end coming from the stump.
MOISTURE:
- The moisture content of firewood in categories A is established indirectly in relation to the weight of the stack, as shown below.
- The weight of firewood in categories A, at the time of delivery by the producer or distributor, must not exceed, at a cubic factor of 0.62 m³.
STAS 2340-80 (category A - shaped wood laid in stacks and doubles - hardwood hardwood stacks).
This standard refers to wood of any species resulting from forestry operations and from cutting off the excess lengths of logs, intended for fuel, called firewood.
Firewood is divided as follows:
- category A includes shaped wood laid in stacks and doubles - hardwood hardwood stacks, with a maximum of 10% softwood or softwood wood;
- hardwood hardwood stacks, with a maximum of 10% wood with a thickness of 5 cm at the thin end, split (lobed): max. 30 cm face width.
TECHNICAL REQUIREMENTS:
- Firewood must be cut to 30 cm in length and split/cracked to a maximum thickness of 20 cm. It must also be placed on pallets so that it can be measured upon delivery.
ANOMALIES AND DEFECTS:
- Firewood of all categories may have all anomalies and defects, except for brittle and fibrous rot.
SHAPING:
- Firewood may remain with the bark, partially or completely peeled, as resulting from exploitation.
- Firewood shaped into steri and double-steri must have the stumps cut to the face of the wood.
- The ends of the firewood must be sawn off, except for breaks and the end coming from the stump.
MOISTURE:
- The moisture content of firewood in categories A is established indirectly in relation to the weight of the stack, as shown below.
- The weight of firewood in categories A, at the time of delivery by the producer or distributor, must not exceed, at a cubic factor of 0.62 m³.