We can offer spruce timber, dried in a dryer, thickness 50, 44, 32, 22, 25 and 46 mm, length 4 m, width 100, 150, 200, 210, 250 mm, class A, B, price 1200 ron / m3.
Hello!
Please send us your offer for the following:
Beech logs length 1-3m - 935.72 m
Softwood logs (spruce-fir) thickness 18mm L1-1.25m, lt.>7 cm - 95.04
Oak round timber for construction, min. 1m D under min 9cm - 33.91 m3
Round acacia wood with a diameter of 8 cm - tree supports, h2.5m, buried 0.8m - 48 m3
Beech edges length 1-2m - 9.9 m
Beech plank Gr40mm L1.8-4m IT 6 - 0.11 m3
Softwood plank class D, thickness 24mm, length 4.00m - 0.26 m3
Round polished acacia wood with a diameter of 20cm - 6.94 m3
Round polished acacia wood with a diameter of 20-30cm - 10.83 m3
Round polished acacia wood with a diameter of 30cm - 12.61 m3.
Thank you!
Please send us your offer for the following:
Beech logs length 1-3m - 935.72 m
Softwood logs (spruce-fir) thickness 18mm L1-1.25m, lt.>7 cm - 95.04
Oak round timber for construction, min. 1m D under min 9cm - 33.91 m3
Round acacia wood with a diameter of 8 cm - tree supports, h2.5m, buried 0.8m - 48 m3
Beech edges length 1-2m - 9.9 m
Beech plank Gr40mm L1.8-4m IT 6 - 0.11 m3
Softwood plank class D, thickness 24mm, length 4.00m - 0.26 m3
Round polished acacia wood with a diameter of 20cm - 6.94 m3
Round polished acacia wood with a diameter of 20-30cm - 10.83 m3
Round polished acacia wood with a diameter of 30cm - 12.61 m3.
Thank you!
Norwegian spruce (Picea abies) lumber specifications include: it is a lightweight, strong, and easy-to-work-with softwood with a creamy white to yellowish color and fine, straight grain. Its density ranges from approximately 405-470 kg/m³ (25-29 lbs/ft³). It is classified into structural strength classes, such as C24, per EN 338 for construction. The wood glues and finishes well with a recommended sanding sealer or gel stain for consistent results.
Key Specifications
Botanical Name: Picea abies
Material Type: Softwood
Density: 405–470 kg/m³ (25–29 lbs/ft³)
Color: Creamy white with a hint of yellow or red
Grain: Fine, even, and consistently straight
Workability: Easy to work with, but can be blotchy when stained without a sealer
Mechanical Properties
Modulus of Rupture (MOR): 63.0 MPa (9,130 lbf/in²)
Modulus of Elasticity (MOE): 9.70 GPa (1,406,000 lbf/in²)
Janka Hardness: 380 lbf (1,680 N)
Applications
Construction: Ideal for framing, wall studs, floor and ceiling joists, beams, and trusses
Interior: Suitable for decorative finishes, panelling, and furniture
Other: Used for packaging, crates, and other heavy-duty applications
Grading and Standards
European Standards: Structural timber is graded according to the EN 338 standard into various strength classes, such as C24.
NELMA: The North American component of the Wood Products Association, which grades the species for use in building.
Important Considerations
Staining: The closed-pore structure can lead to inconsistent results. A sanding sealer, gel stain, or toner is recommended to achieve a uniform finish when coloring Norwegian spruce.
Durability: The heartwood is only slightly resistant to decay. For increased service life in outdoor or above-ground applications, treatment may be required.
Key Specifications
Botanical Name: Picea abies
Material Type: Softwood
Density: 405–470 kg/m³ (25–29 lbs/ft³)
Color: Creamy white with a hint of yellow or red
Grain: Fine, even, and consistently straight
Workability: Easy to work with, but can be blotchy when stained without a sealer
Mechanical Properties
Modulus of Rupture (MOR): 63.0 MPa (9,130 lbf/in²)
Modulus of Elasticity (MOE): 9.70 GPa (1,406,000 lbf/in²)
Janka Hardness: 380 lbf (1,680 N)
Applications
Construction: Ideal for framing, wall studs, floor and ceiling joists, beams, and trusses
Interior: Suitable for decorative finishes, panelling, and furniture
Other: Used for packaging, crates, and other heavy-duty applications
Grading and Standards
European Standards: Structural timber is graded according to the EN 338 standard into various strength classes, such as C24.
NELMA: The North American component of the Wood Products Association, which grades the species for use in building.
Important Considerations
Staining: The closed-pore structure can lead to inconsistent results. A sanding sealer, gel stain, or toner is recommended to achieve a uniform finish when coloring Norwegian spruce.
Durability: The heartwood is only slightly resistant to decay. For increased service life in outdoor or above-ground applications, treatment may be required.
I want to buy pine, larch, spruce, ash, maple timber.
I would like to order smaller quantities initially, so that I can check the quality of the goods.
Thank you!
I would like to order smaller quantities initially, so that I can check the quality of the goods.
Thank you!
Hello
Could you possibly offer us these loads
We are in constant need of these dimensions
Dry KD and IPPC square timber
After drying, 40 x 95 x 1100 mm, cross-cut
2 loads
Fresh spruce square timber, cross-cut or single-cut (for round timber)
55 x 55 x 2500 mm
2 – 4 loads
Dry KD and IPPC boards, cross-cut
17 x 96 x 800 mm 1 load
17 x 76 x 2030 mm 2 loads
17 x 96 x 2030 mm 2 loads
Dry KD and IPPC boards
17 x 78 x 3000 – 5000 mm
2 loads
Planed larch or Douglas fir sideboards with finished dimensions of 20 x 133 x 3600 mm, cross-cut
1 load
Fresh square timber
80 x 100 mm 3000 – 5000 mm
1 load
Could you possibly offer us these loads Or would you be happy to discuss your options
I look forward to your offer.
Could you possibly offer us these loads
We are in constant need of these dimensions
Dry KD and IPPC square timber
After drying, 40 x 95 x 1100 mm, cross-cut
2 loads
Fresh spruce square timber, cross-cut or single-cut (for round timber)
55 x 55 x 2500 mm
2 – 4 loads
Dry KD and IPPC boards, cross-cut
17 x 96 x 800 mm 1 load
17 x 76 x 2030 mm 2 loads
17 x 96 x 2030 mm 2 loads
Dry KD and IPPC boards
17 x 78 x 3000 – 5000 mm
2 loads
Planed larch or Douglas fir sideboards with finished dimensions of 20 x 133 x 3600 mm, cross-cut
1 load
Fresh square timber
80 x 100 mm 3000 – 5000 mm
1 load
Could you possibly offer us these loads Or would you be happy to discuss your options
I look forward to your offer.
Nordik Express produce lime, ash, sycamore, cherry and spruce timber, fresh or killn dried, with FSC certificate, thickness of 20mm, 27mm, 32mm, 40mm, 50mm, 60mm, 70mm +, lenght from 2 M+, width from 14 cm+ and on different qualityes.
Hello!
We would like to buy fir - spruce timber with dimensions of 50×100, 120, 150, 200 - 4m - 6m.
Please send us your price offer per m3.
Thank you.
We would like to buy fir - spruce timber with dimensions of 50×100, 120, 150, 200 - 4m - 6m.
Please send us your price offer per m3.
Thank you.
Hello! We produce fir, spruce timber - 100 m3 per month. If you are interested, please contact us by phone. Good day!
We sell oak, fir, spruce, oak, beech timber.
We buy oak and beech firewood.
We buy oak and beech firewood.
We sell slovak spruce timber. More information e-mail.
Our company produces in stock and to the customer's order any size (maximum 9m length)
The essence of beech, spruce (fir)
The wood is FSC certified
Beams
Timber
Friezes
Logs are cut with professional Mebor
machines
The essence of beech, spruce (fir)
The wood is FSC certified
Beams
Timber
Friezes
Logs are cut with professional Mebor
machines