I am interested in collaboration for sawn timber - spruce and pine.
The subject of the procedure is the purchase and delivery of lumber and construction materials, divided into three lots.
Lot No. 1:
- Edged formwork board (construction lumber) 32 mm;
- Edged formwork board (construction lumber) 25 mm;
- Formwork support board 200x800x30 mm.
Lot No. 2: Structural timber batten.
Lot No. 3: Purchase and delivery of construction materials – 42 product items.
Lot No. 1:
- Edged formwork board (construction lumber) 32 mm;
- Edged formwork board (construction lumber) 25 mm;
- Formwork support board 200x800x30 mm.
Lot No. 2: Structural timber batten.
Lot No. 3: Purchase and delivery of construction materials – 42 product items.
Hello
We are looking for a reliable long-term sawmill/manufacturer partner for the continuous supply of sawn timber.
Product requirements:
• Species: Pinus sylvestris (Scots pine)
• Grade: 3rd grade / industrial / packaging quality
• Application: Industrial packaging and packaging material production
• Moisture content: KD, target approximately 16
• Dimensions: We are looking for sawn timber in various cross-sections and lengths. Please advise whether your production capacity allows for the manufacture of different dimensions according to individual customer requirements.
• Quantity: Following an initial trial shipment, we are looking for a long-term supply of 2–3 full truckloads per week
• Delivery address: 4531 Nyírpazony, Hungary
If you are able to supply the above product on a regular basis, we would appreciate receiving your detailed quotation including the following:
1. EUR/m³ price on FCA terms (ex works / factory collection)
2. EUR/m³ price on DAP terms, delivered to 4531 Nyírpazony, Hungary
3. Available weekly quantity / production capacity
4. Minimum order quantity and average quantity that can be loaded per truck
5. Production and delivery lead time
6. Available cross-sections and lengths
7. Please confirm whether different dimensions can also be produced according to individual customer orders
8. Please confirm whether the offered product comes directly from your own production / sawmill
As a first step, we would like to start the cooperation with a trial shipment. Following successful completion of the trial shipment, we are planning regular purchases of 2–3 full truckloads per week.
If the above requirements are compatible with your production capabilities, we would be pleased to receive your quotation at your earliest convenience.
We look forward to the possibility of establishing a stable and long-term business relationship.
Kind regards.
We are looking for a reliable long-term sawmill/manufacturer partner for the continuous supply of sawn timber.
Product requirements:
• Species: Pinus sylvestris (Scots pine)
• Grade: 3rd grade / industrial / packaging quality
• Application: Industrial packaging and packaging material production
• Moisture content: KD, target approximately 16
• Dimensions: We are looking for sawn timber in various cross-sections and lengths. Please advise whether your production capacity allows for the manufacture of different dimensions according to individual customer requirements.
• Quantity: Following an initial trial shipment, we are looking for a long-term supply of 2–3 full truckloads per week
• Delivery address: 4531 Nyírpazony, Hungary
If you are able to supply the above product on a regular basis, we would appreciate receiving your detailed quotation including the following:
1. EUR/m³ price on FCA terms (ex works / factory collection)
2. EUR/m³ price on DAP terms, delivered to 4531 Nyírpazony, Hungary
3. Available weekly quantity / production capacity
4. Minimum order quantity and average quantity that can be loaded per truck
5. Production and delivery lead time
6. Available cross-sections and lengths
7. Please confirm whether different dimensions can also be produced according to individual customer orders
8. Please confirm whether the offered product comes directly from your own production / sawmill
As a first step, we would like to start the cooperation with a trial shipment. Following successful completion of the trial shipment, we are planning regular purchases of 2–3 full truckloads per week.
If the above requirements are compatible with your production capabilities, we would be pleased to receive your quotation at your earliest convenience.
We look forward to the possibility of establishing a stable and long-term business relationship.
Kind regards.
Dear Sir or Madam,
We are a wholesale supplier of pallet timber and supply a large number of EUR/EPAL pallet repair companies and pallet manufacturers.
We are currently looking for regular suppliers of pallet boards in full truckload quantities for the following dimensions:
- 1200 × 143 × 22 mm
- 1200 × 98 × 22 mm
- 800 × 143 × 22 mm.
Please quote separately for:
- Fresh-sawn material
- Kiln-dried material
- 1st choice quality
- 2nd choice quality
- Boards with chamfered edges, if available.
Please provide your best price per m³ EXW your mill, available monthly volume, minimum order quantity and loading location.
We are also interested in other standard pallet board dimensions, pallet timber and cut-to-length sawn timber an briquettes and pellets that you can supply in full truckloads.
We are looking for reliable long-term suppliers and would be pleased to receive your offer.
Best regards
We are a wholesale supplier of pallet timber and supply a large number of EUR/EPAL pallet repair companies and pallet manufacturers.
We are currently looking for regular suppliers of pallet boards in full truckload quantities for the following dimensions:
- 1200 × 143 × 22 mm
- 1200 × 98 × 22 mm
- 800 × 143 × 22 mm.
Please quote separately for:
- Fresh-sawn material
- Kiln-dried material
- 1st choice quality
- 2nd choice quality
- Boards with chamfered edges, if available.
Please provide your best price per m³ EXW your mill, available monthly volume, minimum order quantity and loading location.
We are also interested in other standard pallet board dimensions, pallet timber and cut-to-length sawn timber an briquettes and pellets that you can supply in full truckloads.
We are looking for reliable long-term suppliers and would be pleased to receive your offer.
Best regards
Dear Supplier,
Good day. We are a leading manufacturer of wooden brooms and brushes and would like to buy treated sawn timber and finish wooden backs (Birch wood or similar wood type). Please, quote for full container loads. Our monthly requirement is 2x40 containers.
WOODEN PLANKS
• 26 X 69 X Longer Length in mm ( No minus measurements , cracks , breakable knots , moisture content less than 15 )
• 30 X 69 X Longer Length in mm ( No minus measurements , cracks , breakable knots , moisture content less than 15 )
FINISH PRODUCTS
• 22 X 65 X 1220 / 915 / 610 mm ( 4 side planned with edges rounded along the length ) – Tolerance ( No minus measurements , up to 0.5 mm in width and thickness , 1 mm in length ).
Good day. We are a leading manufacturer of wooden brooms and brushes and would like to buy treated sawn timber and finish wooden backs (Birch wood or similar wood type). Please, quote for full container loads. Our monthly requirement is 2x40 containers.
WOODEN PLANKS
• 26 X 69 X Longer Length in mm ( No minus measurements , cracks , breakable knots , moisture content less than 15 )
• 30 X 69 X Longer Length in mm ( No minus measurements , cracks , breakable knots , moisture content less than 15 )
FINISH PRODUCTS
• 22 X 65 X 1220 / 915 / 610 mm ( 4 side planned with edges rounded along the length ) – Tolerance ( No minus measurements , up to 0.5 mm in width and thickness , 1 mm in length ).
Hello,
I am contacting you regarding a potential future partnership.
I am a production coordinator at a furniture factory, and our company is constantly seeking new partners for the supply of raw timber or prefabricated components.
If you are interested in a possible collaboration, I could send you a list of the items required for our production.
I look forward to hearing from you.
Best regards.
I am contacting you regarding a potential future partnership.
I am a production coordinator at a furniture factory, and our company is constantly seeking new partners for the supply of raw timber or prefabricated components.
If you are interested in a possible collaboration, I could send you a list of the items required for our production.
I look forward to hearing from you.
Best regards.
We buy structural timber directly from manufacturers and depots, and we are looking for a regular supplier, not a single order.
WHAT WE NEED
1 - Glued laminated timber GL24h or GL24c, spruce or pine, for the main trusses. Sections around 140 x 240 mm.
2 - Solid structural timber KVH C24, finger jointed, for the secondary structure at 80 cm centres. Sections around 100 x 120 mm and 80 x 160 mm.
3 - Tongue and groove boards and battens, if you produce or stock them.
HOW WE WANT IT QUOTED
- STRAIGHT beams only. No curves, no CNC, no cutting to length, no planing to size, no coating, no finishing. We cut everything ourselves on site.
- THE LOWEST GRADE YOU PRODUCE. Industrial quality, non visual. Knots, patches, colour differences, visible finger joints, rough surface and small end splits are all acceptable to us.
- BAR LENGTHS OF 6,00 m AND 7,00 m. These two lengths are what our roof needs. A 13 m bar cut down to 7 m leaves us with almost half the volume as waste, which we pay for and cannot use. If you only run 13 m or 13,50 m, please say so and quote your price per m3 anyway, we will decide.
- Full truck load quantity, and repeated loads over the year.
ONE REQUIREMENT IS NOT NEGOTIABLE
The timber goes into a load bearing roof in Italy, so we need CE marking and a Declaration of Performance to EN 14080 for the glulam and to EN 15497 or EN 14081 for the solid timber, with the declared strength class stated on the DoP. If you cannot supply the CE marking and the DoP, please tell us straight away: we would not be allowed to install the material, and neither of us should spend time on it.
THE QUESTION WE CARE ABOUT MOST
If you make or stock a DIFFERENT PRODUCT WITH THE SAME STRUCTURAL PERFORMANCE AT A LOWER PRICE, please quote that instead of, or beside, what we asked for.
A lower grade, a different species, a different bar length, a different section, a stock lot you want to clear, an item that is standard for you and therefore cheap: we are interested in all of it, as long as the CE marking and the declared strength class are there.
PLEASE QUOTE
1 - EUR per m3, EXW your works, for the glulam sections above
2 - EUR per m3, EXW your works, for the KVH C24 sections above
3 - the same prices DAP Chieri, 10023 Turin, Italy
4 - the volume of one full truck load and your minimum order
5 - your price if we commit to several truck loads over a year
6 - what you can deliver from stock and in how many days
We are registered for intra EU VAT (VIES), so please quote without VAT.
A short answer with real numbers is all we need to start.
Best regards
WHAT WE NEED
1 - Glued laminated timber GL24h or GL24c, spruce or pine, for the main trusses. Sections around 140 x 240 mm.
2 - Solid structural timber KVH C24, finger jointed, for the secondary structure at 80 cm centres. Sections around 100 x 120 mm and 80 x 160 mm.
3 - Tongue and groove boards and battens, if you produce or stock them.
HOW WE WANT IT QUOTED
- STRAIGHT beams only. No curves, no CNC, no cutting to length, no planing to size, no coating, no finishing. We cut everything ourselves on site.
- THE LOWEST GRADE YOU PRODUCE. Industrial quality, non visual. Knots, patches, colour differences, visible finger joints, rough surface and small end splits are all acceptable to us.
- BAR LENGTHS OF 6,00 m AND 7,00 m. These two lengths are what our roof needs. A 13 m bar cut down to 7 m leaves us with almost half the volume as waste, which we pay for and cannot use. If you only run 13 m or 13,50 m, please say so and quote your price per m3 anyway, we will decide.
- Full truck load quantity, and repeated loads over the year.
ONE REQUIREMENT IS NOT NEGOTIABLE
The timber goes into a load bearing roof in Italy, so we need CE marking and a Declaration of Performance to EN 14080 for the glulam and to EN 15497 or EN 14081 for the solid timber, with the declared strength class stated on the DoP. If you cannot supply the CE marking and the DoP, please tell us straight away: we would not be allowed to install the material, and neither of us should spend time on it.
THE QUESTION WE CARE ABOUT MOST
If you make or stock a DIFFERENT PRODUCT WITH THE SAME STRUCTURAL PERFORMANCE AT A LOWER PRICE, please quote that instead of, or beside, what we asked for.
A lower grade, a different species, a different bar length, a different section, a stock lot you want to clear, an item that is standard for you and therefore cheap: we are interested in all of it, as long as the CE marking and the declared strength class are there.
PLEASE QUOTE
1 - EUR per m3, EXW your works, for the glulam sections above
2 - EUR per m3, EXW your works, for the KVH C24 sections above
3 - the same prices DAP Chieri, 10023 Turin, Italy
4 - the volume of one full truck load and your minimum order
5 - your price if we commit to several truck loads over a year
6 - what you can deliver from stock and in how many days
We are registered for intra EU VAT (VIES), so please quote without VAT.
A short answer with real numbers is all we need to start.
Best regards
Construction timber:
- Planks – minimum thickness 5 cm, length 500 cm; width may vary
- Wooden beam 10x10x500 cm
- Wooden beam 70x70x3000 mm
- Batten 1.8x3.6x3000 cm
- Planks – minimum thickness 5 cm, length 500 cm; width may vary
- Wooden beam 10x10x500 cm
- Wooden beam 70x70x3000 mm
- Batten 1.8x3.6x3000 cm
MARK-DREW is a Polish manufacturer of naturally aged and processed timber cladding for exterior facades and interior applications.
We supply professional distributors,, timber importers and building-material wholesalers across Europe.
The timber is seasoned and processed at our own facility and avaliable in wjolesale quantities. FSC-certified material avaliable upon request.
We are looking for long-term cooperation with importers, distributors and professional timber merchants.
We supply professional distributors,, timber importers and building-material wholesalers across Europe.
The timber is seasoned and processed at our own facility and avaliable in wjolesale quantities. FSC-certified material avaliable upon request.
We are looking for long-term cooperation with importers, distributors and professional timber merchants.
Square timber
Dimensions: 10cm x 10cm x 400cm
Thick planks
Dimensions: 5cm x 30cm x 400cm
Boards
Dimensions: 2.5cm x 25cm/30cm x 400cm
Dimensions: 10cm x 10cm x 400cm
Thick planks
Dimensions: 5cm x 30cm x 400cm
Boards
Dimensions: 2.5cm x 25cm/30cm x 400cm
I hope you are doing well.
We are working as sourcing agents for one of the leading importers of softwood timber in Pakistan and are currently looking to establish reliable supply sources.
We are interested in purchasing sawn timber with the following specifications:
Species: Spruce / Pine
Length: 3.0 meters up
Dimensions: Thickness 22-30mm Width 100/125/150/175/200mm
Grade: VI grade / SF grade
Volume: e.g., 500–1000 CBM per shipment
Packing: Export standard packing suitable for container shipment
Destination: CFR Karachi, Pakistan
Kindly provide:
Your quotation (CFR basis preferred)
Available dimensions and grading details
Photos of recent similar shipments (if available)
Earliest shipment schedule
We are looking for a long-term business relationship, and regular volumes can be discussed upon successful trial order.
We are working as sourcing agents for one of the leading importers of softwood timber in Pakistan and are currently looking to establish reliable supply sources.
We are interested in purchasing sawn timber with the following specifications:
Species: Spruce / Pine
Length: 3.0 meters up
Dimensions: Thickness 22-30mm Width 100/125/150/175/200mm
Grade: VI grade / SF grade
Volume: e.g., 500–1000 CBM per shipment
Packing: Export standard packing suitable for container shipment
Destination: CFR Karachi, Pakistan
Kindly provide:
Your quotation (CFR basis preferred)
Available dimensions and grading details
Photos of recent similar shipments (if available)
Earliest shipment schedule
We are looking for a long-term business relationship, and regular volumes can be discussed upon successful trial order.