We are purchasing firewood with the following specifications:
a) Wood category:
- Hardwood (beech, oak, hornbeam), with no admixture of softwoods or coniferous species.
b) Cutting dimensions:
- Length: 1 m, 50 cm, or 35 cm (± 5 cm), depending on the requirements of the receiving unit;
- Diameter: min. 5 cm – max. 30 cm (face width).
c) Processing/Preparation:
- The wood shall be sourced from trees felled at any time of the year; it may retain its bark or be partially or fully debarked, as resulting from logging operations;
- For wood prepared and measured in steres (stacked cubic meters), knots must be trimmed flush with the surface of the wood. The ends of the firewood pieces must be saw-cut, with the exception of natural breakages or the end originally attached to the stump;
- Firewood pieces with a thickness of 16 to 30 cm must be split into four.
d) Moisture content:
- To meet this requirement, the firewood subject to these specifications must be well-seasoned (trees must be felled at least one year prior to the delivery date).
- The maximum permitted moisture content is 25%.
e) Defects:
- Firewood of any category shall not exhibit the following defects: cubical rot or fibrous rot, in accordance with the conditions stipulated in Art. 2.3 of the STAS 2340/1980 standard. - wood that is scorched or over-matured—a condition resulting from it having been left on the ground for an extended period after felling, exposed to moisture and heat—is not accepted.
a) Wood category:
- Hardwood (beech, oak, hornbeam), with no admixture of softwoods or coniferous species.
b) Cutting dimensions:
- Length: 1 m, 50 cm, or 35 cm (± 5 cm), depending on the requirements of the receiving unit;
- Diameter: min. 5 cm – max. 30 cm (face width).
c) Processing/Preparation:
- The wood shall be sourced from trees felled at any time of the year; it may retain its bark or be partially or fully debarked, as resulting from logging operations;
- For wood prepared and measured in steres (stacked cubic meters), knots must be trimmed flush with the surface of the wood. The ends of the firewood pieces must be saw-cut, with the exception of natural breakages or the end originally attached to the stump;
- Firewood pieces with a thickness of 16 to 30 cm must be split into four.
d) Moisture content:
- To meet this requirement, the firewood subject to these specifications must be well-seasoned (trees must be felled at least one year prior to the delivery date).
- The maximum permitted moisture content is 25%.
e) Defects:
- Firewood of any category shall not exhibit the following defects: cubical rot or fibrous rot, in accordance with the conditions stipulated in Art. 2.3 of the STAS 2340/1980 standard. - wood that is scorched or over-matured—a condition resulting from it having been left on the ground for an extended period after felling, exposed to moisture and heat—is not accepted.
Softwood lumber for sale – fir:
- length: 2 m,
- thickness: 3 cm and 3.4 cm,
- widths: various,
air-dried and stacked with spacers.
- length: 2 m,
- thickness: 3 cm and 3.4 cm,
- widths: various,
air-dried and stacked with spacers.
Designed and built with high-density tropical wood.
Living�dining room and kitchen: 100 m� 2 bedrooms of 30 m� each 2 bathrooms of 25 m� each 16 m� lookout gazebo Storage room 25 m�. Total built area: 250 m�.
This villa combines traditional craftsmanship with structural precision. Each beam is assembled using traditional Japanese joinery techniques, ensuring dimensional accuracy, strength, and durability.
The residence rises above a U-shaped reinforced concrete platform, separating it from the surrounding rice fields and creating a central space with a swimming pool and tropical garden.
The architecture blends Indonesian materials with a contemporary tropical style:
� Walls of natural white stone.
� Interior floors made of solid high-density tropical wood planks.
� Structure featuring wooden pillars and roof of the same material.
� Glazed wooden joinery.
� Roof finished with concrete tiles.
� Swimming pool surrounded by a solid tropical wood deck for outdoor use.
The interior layout is organized around an open-plan space integrating the living room, dining area, and kitchen, complemented by two bedrooms and two semi-open bathrooms harmoniously connected with lush vegetation. At the edge of the property, a wooden pergola serves as a viewpoint over the rice fields, offering a privileged space for contemplation.
Manufactured at our facilities on the island of Bali. The components are dismantled and shipped door-to-door to any part of the world.
Our logistics company takes care of the shipping and export documentation.
Regarding our production and manufacturing model, we work exclusively on a made-to-order basis, developing each project to measure and by commission, with a process that is entirely visible to the client. We operate through production contracts that ensure clarity, traceability, and compliance at every stage.
We offer a comprehensive service that encompasses product design, construction, and customized manufacturing, always starting from the idea or concept presented by the client. Our goal is to transform each proposal into a unique piece, crafted with high-quality standards and meticulous attention to detail.
Manufactured at our facilities on the island of Bali. The components are dismantled and shipped door-to-door to any part of the world.
Living�dining room and kitchen: 100 m� 2 bedrooms of 30 m� each 2 bathrooms of 25 m� each 16 m� lookout gazebo Storage room 25 m�. Total built area: 250 m�.
This villa combines traditional craftsmanship with structural precision. Each beam is assembled using traditional Japanese joinery techniques, ensuring dimensional accuracy, strength, and durability.
The residence rises above a U-shaped reinforced concrete platform, separating it from the surrounding rice fields and creating a central space with a swimming pool and tropical garden.
The architecture blends Indonesian materials with a contemporary tropical style:
� Walls of natural white stone.
� Interior floors made of solid high-density tropical wood planks.
� Structure featuring wooden pillars and roof of the same material.
� Glazed wooden joinery.
� Roof finished with concrete tiles.
� Swimming pool surrounded by a solid tropical wood deck for outdoor use.
The interior layout is organized around an open-plan space integrating the living room, dining area, and kitchen, complemented by two bedrooms and two semi-open bathrooms harmoniously connected with lush vegetation. At the edge of the property, a wooden pergola serves as a viewpoint over the rice fields, offering a privileged space for contemplation.
Manufactured at our facilities on the island of Bali. The components are dismantled and shipped door-to-door to any part of the world.
Our logistics company takes care of the shipping and export documentation.
Regarding our production and manufacturing model, we work exclusively on a made-to-order basis, developing each project to measure and by commission, with a process that is entirely visible to the client. We operate through production contracts that ensure clarity, traceability, and compliance at every stage.
We offer a comprehensive service that encompasses product design, construction, and customized manufacturing, always starting from the idea or concept presented by the client. Our goal is to transform each proposal into a unique piece, crafted with high-quality standards and meticulous attention to detail.
Manufactured at our facilities on the island of Bali. The components are dismantled and shipped door-to-door to any part of the world.
Softwood beams, 0.10 x 0.10 x 6 m
Softwood beams, 0.15 x 0.15 x 6 m
Softwood boards, 0.025 x 0.15 x 4 m
Softwood battens, 0.025 x 0.05 x 4 m
Softwood beams, 0.15 x 0.15 x 6 m
Softwood boards, 0.025 x 0.15 x 4 m
Softwood battens, 0.025 x 0.05 x 4 m
Our skirting boards feature a finger-jointed solid paulownia core and a 0.5 mm mineral Gesso coating on the faces and edges. Two finishes: matt white primer for painting or semi-gloss white PU lacquer. Five profiles, including reversible profiles; length 2,300 mm. For timber merchants and professional wood and interior-decoration distributors. For details please contact us.
Dear,
for customers in Pakistan, I am looking for the following specifications:
Sawn timber softwood - fresh - AD: 75x95mm / 3m
SPF 150x250mm / 6m
SPF 150x300mm / 6m.
Can you offer?
Kind regards,
Ludovic
for customers in Pakistan, I am looking for the following specifications:
Sawn timber softwood - fresh - AD: 75x95mm / 3m
SPF 150x250mm / 6m
SPF 150x300mm / 6m.
Can you offer?
Kind regards,
Ludovic
Hello,
We represent a company based in Olt County that produces wood pellets.
We are interested in purchasing approximately 100 tons of sawdust per month, with the aim of establishing a long-term commercial partnership.
Please provide us with a price quote that includes:
- Price per ton (with and without VAT);
- Wood species (softwood, hardwood, or a mix);
- Monthly available quantity;
- Availability of transport to the village of Bacea, in the commune of Movileni, Olt County;
- Payment and delivery terms.
We are looking for a stable partnership, involving monthly purchases and the potential to increase quantities in the future.
Thank you in advance; we look forward to receiving your offer.
Best regards.
We represent a company based in Olt County that produces wood pellets.
We are interested in purchasing approximately 100 tons of sawdust per month, with the aim of establishing a long-term commercial partnership.
Please provide us with a price quote that includes:
- Price per ton (with and without VAT);
- Wood species (softwood, hardwood, or a mix);
- Monthly available quantity;
- Availability of transport to the village of Bacea, in the commune of Movileni, Olt County;
- Payment and delivery terms.
We are looking for a stable partnership, involving monthly purchases and the potential to increase quantities in the future.
Thank you in advance; we look forward to receiving your offer.
Best regards.
Technical Quality Requirements:
- The firewood to be delivered shall comply with the provisions of STAS 2340/1980 (Category A: processed hardwood—oak, beech, hornbeam—stacked in steres). Category A includes processed hardwood stacked in steres, containing no more than 10% softwood or coniferous wood.
Regarding STAS 2340/1980, the following specifications apply:
- Processed wood stacked in steres, cut to a length of 1 m ± 5 cm, with a diameter of 15–30 cm at the thin end;
- Split wood (billets/segments): maximum face width of 30 cm;
- Wood showing signs of rot is not accepted;
- The moisture content of the wood must be sufficiently low to meet the requirements stipulated in Article 2.4.1, paragraph 2, point 1 of STAS 2340/1980.
The total quantity to be procured is: 220 steres (equivalent to 110 tonnes) and 20 steres (equivalent to 10 tonnes).
- The firewood to be delivered shall comply with the provisions of STAS 2340/1980 (Category A: processed hardwood—oak, beech, hornbeam—stacked in steres). Category A includes processed hardwood stacked in steres, containing no more than 10% softwood or coniferous wood.
Regarding STAS 2340/1980, the following specifications apply:
- Processed wood stacked in steres, cut to a length of 1 m ± 5 cm, with a diameter of 15–30 cm at the thin end;
- Split wood (billets/segments): maximum face width of 30 cm;
- Wood showing signs of rot is not accepted;
- The moisture content of the wood must be sufficiently low to meet the requirements stipulated in Article 2.4.1, paragraph 2, point 1 of STAS 2340/1980.
The total quantity to be procured is: 220 steres (equivalent to 110 tonnes) and 20 steres (equivalent to 10 tonnes).
The wood fuel pellets shall be manufactured from softwood and/or hardwood sawdust; they are ideal for automatic, metered feeding, with adjustable flame and temperature settings to ensure consistent and convenient operation of the heating system. The pellets are produced by compressing sawdust into granules.
The pellets shall be packed in 15 kg bags, labeled with the product name and specifications, and shrink-wrapped on pallets containing 66 bags (990 kg).
Technical specifications:
- Diameter: 6 +/- 1 mm
- Length: 3.15 L ≤ 40 mm
- Moisture content: ≤ 10%
- Mechanical durability: ≥ 98.0
- Fines (fine particles): ≤ 1.0
- Pellet temperature: ≤ 40°C
- Mechanical hardness: ≥ 98.0
- Net calorific value: ≥ 4.6 kW/kg
- Bulk density: 600 ≤ BD ≤ 750 kg/m³
- Additives: ≤ 2
- Nitrogen: ≤ 0.3
- Sulfur: ≤ 0.04
- Chlorine: ≤ 0.02
- Ash deformation temperature: ≥ 1200°C
The wood fuel briquettes shall be made from sawdust or wood chips, packed in shrink-wrap film in 5 kg or 10 kg bundles, labeled with the product name and specifications, and supplied on 1-tonne pallets. Technical specification:
- Cylindrical shape: diameter between 5.5 – 9 cm – length 400 mm
- Rectangular (parallelepiped) shape: RUF type – dimensions 150 x 60 x 90 mm
- Moisture content: ≤ 12%
- Ash content: ≤ 1.0%
- Fines (fine particles): ≤ 1.0 g/cm³
- Briquette temperature: ≤ 40°C
- Mechanical durability: ≥ 95.0
- Net calorific value: ≥ 4.3 kWh/kg – ≥ 15.5 MJ/kg
- Additives: ≤ 2%
- Nitrogen: ≤ 0.3%
- Sulfur: ≤ 0.04%
- Chlorine: ≤ 0.02%
- Pressed at a pressure of: 250 – 280 bar/cm³.
The pellets shall be packed in 15 kg bags, labeled with the product name and specifications, and shrink-wrapped on pallets containing 66 bags (990 kg).
Technical specifications:
- Diameter: 6 +/- 1 mm
- Length: 3.15 L ≤ 40 mm
- Moisture content: ≤ 10%
- Mechanical durability: ≥ 98.0
- Fines (fine particles): ≤ 1.0
- Pellet temperature: ≤ 40°C
- Mechanical hardness: ≥ 98.0
- Net calorific value: ≥ 4.6 kW/kg
- Bulk density: 600 ≤ BD ≤ 750 kg/m³
- Additives: ≤ 2
- Nitrogen: ≤ 0.3
- Sulfur: ≤ 0.04
- Chlorine: ≤ 0.02
- Ash deformation temperature: ≥ 1200°C
The wood fuel briquettes shall be made from sawdust or wood chips, packed in shrink-wrap film in 5 kg or 10 kg bundles, labeled with the product name and specifications, and supplied on 1-tonne pallets. Technical specification:
- Cylindrical shape: diameter between 5.5 – 9 cm – length 400 mm
- Rectangular (parallelepiped) shape: RUF type – dimensions 150 x 60 x 90 mm
- Moisture content: ≤ 12%
- Ash content: ≤ 1.0%
- Fines (fine particles): ≤ 1.0 g/cm³
- Briquette temperature: ≤ 40°C
- Mechanical durability: ≥ 95.0
- Net calorific value: ≥ 4.3 kWh/kg – ≥ 15.5 MJ/kg
- Additives: ≤ 2%
- Nitrogen: ≤ 0.3%
- Sulfur: ≤ 0.04%
- Chlorine: ≤ 0.02%
- Pressed at a pressure of: 250 – 280 bar/cm³.
The subject of the contract is the successive delivery of fuel wood - specifically hardwood and softwood fuel chips (biomass) - amounting to 12,000 stacked cubic meters (m³) under the base contract, with the option to increase deliveries by up to 2,400 m³; the material is intended for combustion in POLYTECHNIK VFR 4000 and VFR 1600 biomass boilers and includes transport and unloading at the storage yard by the Contracting Authority’s hospital boiler plant.
Estimated value excluding VAT: 1 224 000,00 PLN.
Estimated value excluding VAT: 1 224 000,00 PLN.
Exceptional clearance price: €0.78 per linear metre
LJ Topwood, a Spanish manufacturer specialising in premium solid wood mouldings and profiles, is offering a large quantity of solid white oak flat cover strips at an exceptional clearance price.
Product Specifications
Product: Solid white oak flat cover strip
Wood species: Solid white oak
Dimensions: 28 × 5 × 2400 mm
Profile: Flat cover strip with one rounded edge
Finish: Unfinished, unvarnished wood
Length: 2400 mm
Clearance price: €0.78 per linear metre
Price per 2.40 m piece: €1.872
Availability: Large quantity available for immediate dispatch from our warehouse in Spain
LJ Topwood, a Spanish manufacturer specialising in premium solid wood mouldings and profiles, is offering a large quantity of solid white oak flat cover strips at an exceptional clearance price.
Product Specifications
Product: Solid white oak flat cover strip
Wood species: Solid white oak
Dimensions: 28 × 5 × 2400 mm
Profile: Flat cover strip with one rounded edge
Finish: Unfinished, unvarnished wood
Length: 2400 mm
Clearance price: €0.78 per linear metre
Price per 2.40 m piece: €1.872
Availability: Large quantity available for immediate dispatch from our warehouse in Spain