Our wood pellets are a high quality, eco-friendly fuel option, perfect for heating your home. Made from compressed sawdust, they burn cleanly and efficiently, providing a sustainable and cost effective alternative to traditional fuels. Packaged in a robust 15kg bag, they are easy to store and handle, ensuring a convenient and mess free heating solution. Whether you39;re powering a stove or a boiler, these pellets are designed for optimal energy output, keeping your space warm and your conscience clear.

EN plus A1 certified
Wood species: softwood
Ash content:

We are purchasing 25,687 cubic meters of lumber, as follows:

1. Timber (softwood planks) 0.025x 0.12x 4 m (1081 pieces) cubic meters - 12,975;
2. Timber (cabinets) 0.05x 0.15x 4 m (116 pieces) cubic meters - 3.50;
3. Softwood beams, 0.12x 0.12x 6 m (80 pieces) cubic meters - 6,912;
4. Softwood planks, 0.05x 0.05x 4 m, (230 pieces) cubic meters - 2.30.

We are currently sourcing Pine or Spruce whitewood sawn timber for export, with the following specifications:

Kiln Dried Timber (KD 16–18):

Anti-fungal stain treatment required
No black/dead knots, no bending
Full square edges
Packed and wrapped with plastic foil (with logo)

Dimensions Quantities:

22 × 95 × 4000 mm
45 × 45 × 4000 mm
22 × 46 × 4000 mm

Air Dried Timber:

45 × 245 × 4000 mm
72 × 72 × 4000 mm
145 × 145 × 4000 mm → 1 × 40’ container

Requirements:

Consistent quality and grading
Reliable supply capacity
Photos and technical details appreciated

Please contact us with offer, specifications, and delivery terms.

Hello!

We are a logistics company operating from Germany and UK.
We would like to export timber from the Europe.

We are looking for following timber / lumber in bulk to buy. I would like to request for a quotation to initiate our possible new business association with your organisation.

White wood
1 inch x 4 inch x 4 meters length
3 inch x 3 inch x 4 meters length
1.5 inch x 1.5 inch x 4 meter length

Beech wood
2 inch x 6 inch
2 inch x 8 inch
2 inch x 10 inch
2 inch x 12 inch
Length 8, 12, 16 feet

We would like to know the loading port and we would like to confirm that below price is a FoB price.
The port of Destination is: any UAE port (Jabel ali, Khor Fakkan Port, Port of Fujairah, Khalifa Port).

Could you please let us know the payment terms and firm details along with the website please.
We would like to calculate the transit cost based on the source port and progress further.

Thanks,
Mallesh Kota

Purchase of hardwood firewood.
Minimum quantity: 645 cubic meters.
Maximum quantity: 1000 cubic meters.

The firewood to be delivered will comply with the provisions of STAS 2340/1980 (category A - shaped hardwood hardwood, placed in stacks). This standard refers to wood of various hardwoods and softwoods, resulting from forestry operations and from cutting the excess lengths of logs, intended for fuel, called firewood. Category A includes shaped wood placed in stacks and double stacks - hardwood hardwoods, with a maximum of 10% softwood or softwoods.

Sterile shaped wood:
- length 1m+/-5cm
- thickness (with bark): round: 5...15 cm at the thin end; split (lobed): max. 30 cm width of the face.

Defects:

The firewood that is the subject of this specification cannot have the following defects:
- rot with cubic structure;
- fibrous rot, in compliance with the conditions specified in art.2.3 of STAS 2340/1980.

Shaping:

The trees are felled with a saw in forest exploitations and with an axe in groves, the wood remaining with bark, partially or completely peeled, as resulting from the exploitations.
The firewood shaped in steri must have the stumps cut down to the face of the wood. The ends of the firewood must be cut off with a saw, except for breaks and the end coming from the stump.

Firewood shaped into steri with a thickness of 16...25 cm must be split in two, that with a thickness of 26...40 cm must be split into four approximately equal pieces, and that with a thickness of 40 cm into so many pieces that the largest width of the split piece, measured at the thick end of the wood, does not exceed 30 cm.
The following conditions must also be observed: - the wood shaped into steri will be cut to 30 cm in length; - the diameter of the shaped wood will be between 5 and 25 cm, maximum 30 cm width of the face.

Humidity:

The humidity of the firewood covered by this specification is determined indirectly in relation to the weight of the ster, as shown below:
- the weight of the firewood at the time of delivery by the producer or distributor must not exceed, at a cubic factor of 0.62, the weight of 500 kg meter-ster of hard species without admixture of soft or resinous species.

In order to meet the above condition, the firewood covered by this specification must be very well dried (the trees must have been cut down at least one year before the date of delivery).

Supply of softwood in the form of sawn timber, planks and rafters, treated or not autoclave, to be delivered to the ATIGIP RIEP joinery workshops, divided into 2 separate lots.

Hello!

I am contacting you with a view to establishing a partnership for the purchase of new half pallets (600x800 mm), intended for export to a strategic customer in the Benelux area (Netherlands).
Given the volume of our current invoices, we are interested in a long-term collaboration for the following technical specification:

Type: Half pallet (600x800 mm), 5 upper elements.
Quantity: Initial order of 2,460 pieces (approx. 4 trucks), with potential for weekly/bimonthly delivery.
Treatment: Softwood/hardwood, heat treated according to ISPM 15 standard (IPPC marking mandatory).
Quality: Class II (Grade B) or mixed (sound wood, without structural defects).
Logistics: FCA pick-up (our own trucks will arrive at your factory for loading).

Please send us a price offer per piece (in EUR or RON) for this quantity. I would like to mention that we are in the process of selecting suppliers and are aiming for an extremely competitive price to cover the high logistics costs to the Netherlands.

I look forward to your response.

Best regards!

Hello!

We are a logistics company operating from Germany and UK. We would like to export timber form the Europe.
We are looking for following timber in bulk. I would like to request for a quotation to initiate our possible new business association with your organisation.

White wood
1 inch x 4 inch x 4 meters length 
3 inch x 3 inch x 4 meters length
1.5 inch x 1.5 inch x 4 meter length

Beech wood
2 inch x 6 inch 
2 inch x 8 inch
2 inch x 10 inch
2 inch x 12 inch
Length 8, 12, 16 feet


Thanks!

Hello Do you sell softwood sawdust Thank you

Hello!

Please send me your price offer per cubic meter for softwood lumber - spruce species - with delivery in Cluj County.

Thank you!

Hello We produce softwood and hardwood lumber, any size. If you are interested, please contact us. Thank you