Firewood category A, hardwood (beech, oak, acacia, hornbeam):
- dry wood (round or split)
- pieces of length 30-40 cm, maximum thickness 30 cm at the cut surface
- humidity 10-25%
- wood for construction will not be distributed.
- dry wood (round or split)
- pieces of length 30-40 cm, maximum thickness 30 cm at the cut surface
- humidity 10-25%
- wood for construction will not be distributed.
Technical specifications:
- firewood must come only from hardwood trees
- the types of hardwood accepted will be only: oak, beech, hornbeam, elm, acacia, maple, sycamore, fir, etc.
- lengths: 25 - 30 cm, with diameters between 0.15 m+/- 0.50 m
- firewood must be packaged / placed in order to be measured (cubed) according to the legislation
- shaped firewood must have the branches cut to the face of the wood.
Quantity: 418.30 m3.
Estimated value: 199,173 RON.
- firewood must come only from hardwood trees
- the types of hardwood accepted will be only: oak, beech, hornbeam, elm, acacia, maple, sycamore, fir, etc.
- lengths: 25 - 30 cm, with diameters between 0.15 m+/- 0.50 m
- firewood must be packaged / placed in order to be measured (cubed) according to the legislation
- shaped firewood must have the branches cut to the face of the wood.
Quantity: 418.30 m3.
Estimated value: 199,173 RON.
Technical conditions:
- Wood category: Firewood of various thicknesses, shaped
- Length: Max. 30 cm
- Thickness (with bark): Max. 25 cm at the cut surface.
ANOMALIES AND DEFECTS:
Firewood of all categories may have all anomalies and defects, except for crumbly and fibrous rot.
SHAPING:
Shaped firewood must have stumps cut to the face of the wood and a maximum thickness of 25 cm. Logs with a thickness greater than 25 cm will be split so that the shaped wood does not exceed 25 cm at the thick end.
QUALITY:
The product must comply with all norms, standards, orders or other regulations specific to them, the economic operator being obliged to present quality and conformity certificates.
The physical, chemical and bacteriological properties are guaranteed by the supplier through its own control and are verified in case of litigation at the request of the beneficiary and at the supplier`s expense.
Estimated value: 208,205 RON.
- Wood category: Firewood of various thicknesses, shaped
- Length: Max. 30 cm
- Thickness (with bark): Max. 25 cm at the cut surface.
ANOMALIES AND DEFECTS:
Firewood of all categories may have all anomalies and defects, except for crumbly and fibrous rot.
SHAPING:
Shaped firewood must have stumps cut to the face of the wood and a maximum thickness of 25 cm. Logs with a thickness greater than 25 cm will be split so that the shaped wood does not exceed 25 cm at the thick end.
QUALITY:
The product must comply with all norms, standards, orders or other regulations specific to them, the economic operator being obliged to present quality and conformity certificates.
The physical, chemical and bacteriological properties are guaranteed by the supplier through its own control and are verified in case of litigation at the request of the beneficiary and at the supplier`s expense.
Estimated value: 208,205 RON.
Supply of wood pellets to Jelgava region municipal institutions for the 2026/2027 heating season.
Purchase of bulk pellets for the production of heat energy.
Firewood must comply with the standards and regulations in force and meet the following conditions:
- 1 meter long;
- split or round;
- hardwood: acacia, oak, beech, hornbeam or elm;
- humidity between 10% and 20%;
- free of rot or other defects that affect quality.
- 1 meter long;
- split or round;
- hardwood: acacia, oak, beech, hornbeam or elm;
- humidity between 10% and 20%;
- free of rot or other defects that affect quality.
Delivery of wood pellets to the administrative institutions of the Nautrēni Association.
Hello! I`m interested in buying 22-100 mm fir lumber. Can you supply it? Thank you!
REQUEST FOR QUOTATION – KILN-DRIED OAK TIMBER / LONG-TERM SUPPLY
We are looking for a direct oak timber manufacturer / sawmill / wood processing company in Romania capable of supplying a long-term industrial customer in the United Kingdom.
The opportunity involves an estimated requirement of approximately 97.3 m³ per month, with potential for a long-term supply agreement.
Current Specification
Species: European Oak
Thickness: 18 mm
Grade: approximately 15 A / 85 AB
Length: 2.2–4.2 metres
Monthly volume: approximately 97.3 m³
Annual volume: approximately 1,168 m³
Destination: United Kingdom
Supply: long-term / recurring
Pricing
The customer39;s current purchasing benchmark is approximately €550/m³.
We are looking for a competitive direct-from-manufacturer quotation, with the objective of achieving a meaningful reduction against the current benchmark.
For a genuine like-for-like comparison, pricing will be assessed taking into account:
Timber grade and sorting;
Final moisture content;
Dimensional tolerances;
Kiln-drying requirements;
Packaging;
Loading;
Transport to the UK;
Any other costs associated with the supply.
Information Required
Interested manufacturers are requested to provide:
1. Indicative price in €/m³;
2. Available monthly production capacity;
3. Kiln-drying capacity;
4. Guaranteed moisture content;
5. Grading and sorting specification;
6. Available lengths;
7. Minimum order quantity;
8. Production lead time;
9. Previous experience exporting to the UK and/or EU;
10. Available delivery terms, including EXW / FCA / DAP, where applicable.
Preferred Supplier
Direct manufacturers and sawmills are strongly preferred.
We are particularly interested in companies with the capacity to supply approximately 100 m³ per month consistently, rather than suppliers focused only on occasional or spot orders.
There is also potential for future requirements involving:
PAR oak timber;
14 mm and 16 mm finished thickness;
widths from 100 mm to 200 mm in 25 mm increments;
further machining and processing;
volume production of finished oak products.
This could therefore develop into a significant long-term supply relationship, rather than a one-off purchase.
Manufacturers interested in discussing the opportunity are invited to contact us with their company profile, production capabilities and indicative pricing.
Direct manufacturers only preferred.
We are looking for a direct oak timber manufacturer / sawmill / wood processing company in Romania capable of supplying a long-term industrial customer in the United Kingdom.
The opportunity involves an estimated requirement of approximately 97.3 m³ per month, with potential for a long-term supply agreement.
Current Specification
Species: European Oak
Thickness: 18 mm
Grade: approximately 15 A / 85 AB
Length: 2.2–4.2 metres
Monthly volume: approximately 97.3 m³
Annual volume: approximately 1,168 m³
Destination: United Kingdom
Supply: long-term / recurring
Pricing
The customer39;s current purchasing benchmark is approximately €550/m³.
We are looking for a competitive direct-from-manufacturer quotation, with the objective of achieving a meaningful reduction against the current benchmark.
For a genuine like-for-like comparison, pricing will be assessed taking into account:
Timber grade and sorting;
Final moisture content;
Dimensional tolerances;
Kiln-drying requirements;
Packaging;
Loading;
Transport to the UK;
Any other costs associated with the supply.
Information Required
Interested manufacturers are requested to provide:
1. Indicative price in €/m³;
2. Available monthly production capacity;
3. Kiln-drying capacity;
4. Guaranteed moisture content;
5. Grading and sorting specification;
6. Available lengths;
7. Minimum order quantity;
8. Production lead time;
9. Previous experience exporting to the UK and/or EU;
10. Available delivery terms, including EXW / FCA / DAP, where applicable.
Preferred Supplier
Direct manufacturers and sawmills are strongly preferred.
We are particularly interested in companies with the capacity to supply approximately 100 m³ per month consistently, rather than suppliers focused only on occasional or spot orders.
There is also potential for future requirements involving:
PAR oak timber;
14 mm and 16 mm finished thickness;
widths from 100 mm to 200 mm in 25 mm increments;
further machining and processing;
volume production of finished oak products.
This could therefore develop into a significant long-term supply relationship, rather than a one-off purchase.
Manufacturers interested in discussing the opportunity are invited to contact us with their company profile, production capabilities and indicative pricing.
Direct manufacturers only preferred.
Purchase of hardwood firewood (beech, hornbeam, oak, acacia):
- wood with healthy core, without mold, rot
- no knotty wood with twisted fiber or wood roots that require heavy processing
- cut to 0.4 - 0.5m length at the buyer`s premises
- cutting and transport must be included in the price.
- wood with healthy core, without mold, rot
- no knotty wood with twisted fiber or wood roots that require heavy processing
- cut to 0.4 - 0.5m length at the buyer`s premises
- cutting and transport must be included in the price.
Supply of lumber products:
- fir cabinet lumber;
- fir plank lumber;
- fir beam lumber 10x10;
- oak lumber (plank): 2.5cm thick, 20cm wide, 4m long;
- unedged linden cabinet lumber: 5cm thick, 4m long.
- fir cabinet lumber;
- fir plank lumber;
- fir beam lumber 10x10;
- oak lumber (plank): 2.5cm thick, 20cm wide, 4m long;
- unedged linden cabinet lumber: 5cm thick, 4m long.